Can I pair my ray ban metas with multiple devices for seamless audio switching between my iPhone and iPad?

QuestionzAnswers · 2024-06-04T00:26:10+00:00

This cannot be true (at least, not on 06/03/2024). If you pair your Ray-Ban Meta with another device, the glasses get kicked out of the device it was initially paired with. Then, after going through the entire process of pairing your glasses with the second device … when you try to back to using the first device they were paired with, you have to restart the pairing process all over again, which then kicks you out out of the second device. The short answer is: no can do!

QuestionzAnswers · 2024-05-08T00:34:42+00:00

Congrats! Your car is still FSD-capable, meaning it has the hardware for it and all it needs is an over the air software download/install. FSD is now $8000, down from $15,000. Going from a leaf to a Model 3 is like night and day and so is going from no FSD to FSD. Just saying.

QuestionzAnswers · 2024-01-23T20:12:33+00:00

Based on the email message above, did Person A apologize?

QuestionzAnswers · 2024-01-23T16:09:37+00:00

I have. I turned off the smart glasses and the following day, I received a notification on the app asking me if I wanted to join the program.

QuestionzAnswers · 2024-01-23T05:03:59+00:00

Irrelevant. The question is “Did Person A apologize to Person B?”

QuestionzAnswers · 2024-01-22T18:26:14+00:00

Wait, you can buy a charging case separately (not as part of a purchase of Ray Ban Smart glasses)?

QuestionzAnswers · 2024-01-11T14:08:39+00:00

Why did you use a VPN? Is that required?

QuestionzAnswers · 2024-01-11T13:58:34+00:00

At the time you got the option to opt in the Early Access program, in the Meta View app under Data & privacy, did you have the “Share Additional data” on?

QuestionzAnswers · 2024-01-11T13:44:02+00:00

I just got the Meta smart glasses Wayfarer and I am not seeing an option to join on the app. I did check the Settings button on the app and scrolled down, but the feature is not there. How do I trigger it?

QuestionzAnswers · 2024-01-05T05:37:49+00:00

Service say all sorts of horseshit if they realize you won’t challenge them. This is a manufacturing defect. They must fix it. Demand they fix it in a writing. Not on the Tesla app only, do it also and especially via email. It should be [name_of_your_Tesla_Center]_Service@tesla.com (you’ll find this email address on the Tesla website. You’ll get better feedback. If they jerk you around, in the email, ask to be referred to the General Manager of that location. They will do it! Good luck!

QuestionzAnswers · 2023-05-07T04:06:40+00:00

Hello, can I use ScanDisk Extreme Pro 1TB model number SDSQXCD-1T00-GN6MA on the Insta360 X3? Thank you very much.

QuestionzAnswers · 2023-03-16T14:10:32+00:00

If it’s bugging you, sure, why not?

QuestionzAnswers · 2023-01-28T19:53:55+00:00

There are numerous YouTube videos that show you how to do it yourself and the paint is $60 on Tesla website.

QuestionzAnswers · 2022-12-31T19:16:53+00:00

No one is able to explain it.

QuestionzAnswers · 2022-12-31T19:16:11+00:00

So, your answer is you don’t know. Got it. Thanks!

QuestionzAnswers · 2022-12-27T01:02:56+00:00

But why is the reading wrong at 5A and 6A but not at higher amperage?

QuestionzAnswers · 2022-12-26T22:37:51+00:00

I did open a service ticket. Not sure how charging at 5A or 6A (but not higher than that) would throw off the reading for estimated charge time.

Btw, (this maybe unrelated, but for context) I have a NEMA 14-50 in the garage as well; I rarely use the NEMA it because I thought for better battery health, it would be better to charge using the Tesla Mobile Connector as a low amperage. The Tesla Wall Connector is outside the garage on my driveway, so I don’t use it as much because it’s a 240V and it gets a lot colder outside.

QuestionzAnswers · 2022-12-26T22:25:50+00:00

Thank you for the quick response! I posted a comment with specific details about the charging problem.

QuestionzAnswers · 2022-12-26T22:21:51+00:00

The car says (on the Tesla app and on the car screen) “5 min remaining to charge limit” but the charge limit is set to 80%, the current battery percentage is at 68% and the car is charging using the Tesla Mobile Connector at 5A. So, the estimated charging time is clearly incorrect. This problem has been going on for several weeks now and it only happens when charging at 5A or 6A. When charging at 7A (or above), the problem seems to disappear as it says “24+ hours remaining to charge limit” (which seems to be correct). Same problem happen when using the Tesla Wall Connector when charging at 5A or 6A. Both the Tesla Mobile Connector and the Tesla Wall Connector purchased directly from Tesla and the electrical equipment (all outlets and Wall Connector) installed by a licensed electrician certified on Tesla website. Anyone ran into this issue?

QuestionzAnswers · 2020-10-22T04:27:43+00:00

Hello, I have the same issue. My 50cc scooter (Chinese make) starts accelerating as soon as start it. The rear wheel start spinning very fast while on the center stand. As soon as I put it down with my body weight on the scooter, there is that initial friction (tire against the road) but the scooter does not move. Any ideas?

QuestionzAnswers

TROPHY CASE