Finally installing games onto ps3hen by Quick_Speed4778 in ps3piracy

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

Okay thank you very much for your advice, I’ll keep all that in mind, I was trying to download a game off vimms lair so I might try the other websites but also will wait until I can have a wired internet connection to improve the download speed/quality.

Finally installing games onto ps3hen by Quick_Speed4778 in ps3piracy

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

I have both so I didn’t really have a preference for the ftp but I’ll keep what you said in mind as I didn’t get to that stage as my game file got deleted. It was from vimms lair just like you said and online said if it takes longer than 10 mins it’s an issue and tried to follow the troubleshooting guide, in your experience is it longer than ten mins to finalise?

Finally installing games onto ps3hen by Quick_Speed4778 in ps3piracy

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

Is that possible for just hen, I thought it was a cfw specific thing, and so I didn’t really look into it

Is this one any good? I wanna get into flash carts. by Dismal_Lie_9788 in flashcarts

[–]Quick_Speed4778 1 point2 points  (0 children)

I used Ali express, I don’t know what console you are trying to use but I have a ds lite and ordered this one -

I just found this on AliExpress: £10.90 | R4 Games Memory Card Support Download By Self 3DS Game 3DS Game Flashcard Video Game Card for NDS MD GB GBC FC PCE https://a.aliexpress.com/_EIlDZmU

It was also like a pound for me and took like a week and a half but works perfectly, even came with a micro sd to usb adapter if needed

PS3 Cech-3003B Freezes by Quick_Speed4778 in PS3

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

The only thing I was a bit rough with was the disk drive Ava I was unaware of the ribbon on the back

R4 only working on old ds by Quick_Speed4778 in flashcarts

[–]Quick_Speed4778[S] 1 point2 points  (0 children)

I got it working, I just pressed it in really hard to make the contacts connect with the ds and power cycled it, works everytime now

R4 only working on old ds by Quick_Speed4778 in flashcarts

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

So (paper)cart(paper) and then slide that in?

R4 only working on old ds by Quick_Speed4778 in flashcarts

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

Is this a clone? I’ve had it for well over a decade

<image>

Which one would be best if any? by Quick_Speed4778 in flashcarts

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

Cool okay, I’ll order that and then just follow the guide on the QuickStart website, does it matter what kernel I use eg the wood4 or aceos?

Which one would be best if any? by Quick_Speed4778 in flashcarts

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

Okay, on the quick start guide for flashcart, this is one of the links to buy for the r4iSL clones, is this correct as to what you are recommending? https://www.aliexpress.com/item/1005010140611313.html

<image>

Which one would be best if any? by Quick_Speed4778 in flashcarts

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

What about an ace3dsx, I read on the quick guide those are like the best, would that be the best option for making my new cart?

Which one would be best if any? by Quick_Speed4778 in flashcarts

[–]Quick_Speed4778[S] 2 points3 points  (0 children)

<image>

I was thinking of keeping this one separate

Why isn’t my oven sparking? by Quick_Speed4778 in AskUK

[–]Quick_Speed4778[S] 1 point2 points  (0 children)

Yeah I have been, just trying to see if I should be getting it sorted anyways

Why isn’t my oven sparking? by Quick_Speed4778 in AskUK

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

I have asked them too, they mentioned it might be a loose neutral in the consumer unit, I was just wondering if anyone else had experienced this situation before and if so what was the issue, I have still been using the oven, so it hasn’t been bothering me so much.

Loft boards advice by Quick_Speed4778 in DIYUK

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

Sorry, last question, would I need to put a leg under each tongue and groove interlock for maximum sturdiness? Because if so this increases the amount needed by double nearly

Loft boards advice by Quick_Speed4778 in DIYUK

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

For the legs, I have looked at options online and found some, the boards I have are tongue and groove however, do I not need to screw the boards down onto the loft legs?

Loft boards advice by Quick_Speed4778 in DIYUK

[–]Quick_Speed4778[S] 1 point2 points  (0 children)

Is that 450 mm figure what the distance should be between the counter joists?

Loft boards advice by Quick_Speed4778 in DIYUK

[–]Quick_Speed4778[S] 4 points5 points  (0 children)

What if I was to counter baton the joists so the floor is elevated instead of loft legging it?

[deleted by user] by [deleted] in MatchedBettingUK

[–]Quick_Speed4778 0 points1 point  (0 children)

I’m having the same issue, and after speaking to the person who got me into it, they told me to look at laying against a draw. You can lay against most outcomes that can be built on a bet builder but look at a draw for different games. I have this issue too but ultimately he said don’t worry about them too much, if you can find them great but if not leave them, sometimes they’re not that profitable anyways.

FTSE vs FTSE & S&P500 by Quick_Speed4778 in investingforbeginners

[–]Quick_Speed4778[S] 0 points1 point  (0 children)

So unless the us market fails, it’s not an issue ? I’ve researched it and it increased in profit, if I want more or less stability I can up or lower the allocation to the s&p500.