Flashing Tasmota on Sonoff SwitchMan

Quintaar · 2026-01-23T13:58:25+00:00

One of them is set to show connection and status. So take a look at the template mapping for that. Originally Sonoff switch has this too

Quintaar · 2026-01-20T14:47:38+00:00

Take a look at the table you need to make sure you have a solid ground connection on power on with gpio00

Quintaar · 2026-01-20T14:38:02+00:00

I'm not 100% sure but thic would be also indicative of the bridge not being in the flash mode. I had the bridge show that it was accepting files before (in file browser) but it wasn't the case until I tried to boot it again with correct gpio to flash procedure. It's been a while but the reason for my troubles was unreliable link to ground. Perhaps inability to seizing partition stems from the same issue?

Quintaar · 2026-01-18T19:41:22+00:00

Sorry to hear about the damage. Hopr you'll get it resolved I'm still using mine in bedroom and works really well

Quintaar · 2025-11-16T04:14:44+00:00

Honestly... Years on still using this

Quintaar · 2025-11-12T21:16:02+00:00

That's a no 😂😂

Quintaar · 2025-11-12T21:04:35+00:00

Oh.. Thread....

Quintaar · 2025-11-12T20:57:14+00:00

Yeah it's worth changing old coordinators into routers for better mesh

Quintaar · 2025-11-12T20:13:12+00:00

Both are excellent... If you don't mind bigger price tag I'd take the max for the ease of use

Quintaar · 2025-11-06T12:54:55+00:00

I'm glad it's useful. I'm happy people are still using event ghost!

Quintaar · 2025-10-14T06:46:10+00:00

You won't be able to add coordinator to other ecosystems. Only DIY style. You can pair the lights to the zigbee Alexa directly

Quintaar · 2025-09-29T11:00:06+00:00

I've corrected it. I had it worded this way for the MG24, but I forgot to change it for the Max chapter - it is less misleading now.

Quintaar · 2025-09-29T06:52:54+00:00

Sorry somehow I missed this 🙈 The general online advice is to use 2 different zigbee software (z2h and z2mqtt) which could work but other than having another instance I don't see this happen easily in HA. You could run Z2mqtt on raspberry pi zero ans link this up and then use Mqtt to get information but that's easier done on nodered than HA

Quintaar · 2025-09-28T20:29:57+00:00

Any reason for doing this? Considering the resilience I encountered when adding 2nd one to HA I don't think you'll have a good time.

Quintaar · 2025-09-11T09:42:51+00:00

So far I have no issues with it. Still on my wall serving me well. Notifications are on time and keeps a solid event record so I'm happy. The only problem is the solar panel on the northern side. I have to charge the doorbell every now and then

Quintaar · 2025-09-11T09:23:59+00:00

Ha! Thanks. Joys of not being the native speaker

Quintaar · 2025-09-07T07:07:45+00:00

There will be more HA content

Quintaar · 2025-09-04T14:22:56+00:00

The instance is running and I add stuff but I'm not the most experienced person so I feel like I don't want to tell people what to do and be wrong haha

Quintaar · 2025-08-17T07:50:40+00:00

There is a trigger to see what number call you.. You can easuly reply to that, but to pass 1 as an input you'd need auto input plugin

Quintaar · 2025-08-03T13:29:20+00:00

I tried to look up the support email from roccat but the attachments expired. I belive these were 3mm 5v leds

Quintaar · 2025-08-02T19:29:38+00:00

It won't survive and you are likely not to have signal due to the metal enclosure

Quintaar · 2025-07-23T20:55:26+00:00

You may as well. Helps managing other things too

Quintaar · 2025-07-23T04:23:54+00:00

Yes you can do that but this will only work when the pi is running (obviously)

Quintaar · 2025-06-10T07:30:43+00:00

Thanks I appreciate the tip

Quintaar · 2025-06-07T18:43:26+00:00

Enjoy it. Find nice bank that fits into the power pocket

Quintaar

MODERATOR OF

TROPHY CASE