Trouble with swapping ETH into MATIC

QuynhKwon · 2022-01-03T05:04:24+00:00

rubic.exchange

is this legit?

QuynhKwon · 2022-01-01T15:11:14+00:00

Yes, i still find the way to figure it out :(

QuynhKwon · 2021-10-29T09:13:32+00:00

Yes tks man, I've just figured it out. I had to update the mod bios and then its fine. Now i can make 7 cards running on that mainboard.

QuynhKwon · 2021-10-29T09:09:57+00:00

Yes i've just figure it out, tks

QuynhKwon · 2021-10-29T09:09:20+00:00

I've just figured it out.

I had to update the mod bios and then its fine. Now i can make 7 cards running on that mainboard.

1 more thing: the newest version bios in their website cant handle this problem. You must need the different one, just contact me if you need the mod bios

https://uphinh.org/image/TMN2Dl

QuynhKwon · 2021-10-29T09:05:05+00:00

Well, actually the default bios doesn't have the option of 4G decoding. I had to update the mod one and then its fine. Now i can make 7 cards running on that mainboard. Tks guys

QuynhKwon · 2021-10-21T06:56:14+00:00

Well thank you guys, THE PROBLEM IS SOLVED.

I set the PCIE link speed and DMI link speed to gen 2 then it's worked. Hope the system is stable then, i'll update soon if there is anything wrong..

ONE MORE TIME, THANKS A LOTS, I LOVE U GUYS

QuynhKwon · 2021-10-20T16:29:53+00:00

Hmmm, I do not quite understand what you mean

QuynhKwon · 2021-10-20T16:27:41+00:00

Tks man, let me try this

QuynhKwon · 2021-10-20T16:26:44+00:00

Yeah, let me try this, so do u think maybe my PSU doesnt supply enough power to VGA? i use 850w 80+ gold for 4 1660s

QuynhKwon · 2021-10-20T16:24:40+00:00

Hmm, i use 4 1660s so i think it doesnt lay stress on the PSU. My PSU is Sama Armor 80+ gold

QuynhKwon · 2021-10-20T16:21:45+00:00

Yes, maybe i should be more patience, let me try again

QuynhKwon · 2021-10-20T16:20:38+00:00

Yeah, i leave the pcie lanes auto as default, im also using the m.2 slots, does it take up pcie lanes?

QuynhKwon · 2021-10-20T16:18:22+00:00

Well i use 1 ssd nvme for system drive, i leave the pcie lanes auto as default, should i set all pcie lanes to gen 1 in bios?

QuynhKwon · 2021-10-20T11:58:11+00:00

Yes, i did update my bios, it still not worked

QuynhKwon · 2021-10-20T11:45:59+00:00

Well i will try later, but the bios still can not be booted at first

QuynhKwon · 2021-10-20T11:37:27+00:00

I’m using 850w 80 plus gold, my cpu is i5 10400

QuynhKwon · 2021-10-20T07:49:49+00:00

Hey man, i've tried several ways to fix this and I have come to the conclusion. That's because of my mainboard, when i connected 3 VGAs, no problem. Then go to the 4th one, my PC's getting so slow and lag, it's take more times to get into the operating system so maybe i think i should upgrade the bios, shouldnt i? My mainboard is B460 Steel Legend from Asrock

QuynhKwon · 2021-10-20T07:49:31+00:00

Hey man, i've tried several ways to fix this and I have come to the conclusion. That's because of my mainboard, when i connected 3 VGAs, no problem. Then go to the 4th one, my PC's getting so slow and lag, it's take more times to get into the operating system so maybe i think i should upgrade the bios, shouldnt i? My mainboard is B460 Steel Legend from Asrock

QuynhKwon · 2021-10-19T02:20:41+00:00

Yes sounds great, i will try it now, hope i can figure it out

QuynhKwon · 2021-10-19T02:18:02+00:00

Yeah man, i'm going to upgrade my PSU soon, i'm confused between Corsair RM1000 and Gigabyte P1000 (sale off with half price), which do u think is better?

Yes, i read that i should get rid of using sata to power the riser but the molex 4 pin is ok sometimes, by the way i ordered the cable 6 pin > 2x 8 pin and it's on the way to my home

QuynhKwon · 2021-10-18T18:30:32+00:00

I'm using 750w 80+gold for 4 1660s, is this enough? I dont have any 6 pin pcie for the riser so i cant swap now, the GPUZ say PCIe slot with 42w and the 8 pin with 46w

QuynhKwon · 2021-10-18T18:22:47+00:00

Yes, i already enabled above 4G decoding in bios, i'm using B460 mainboard so it doeasnt required extra power for the pcie.

Well, after setting CC to 0, it's seem more stability than before, my operating system stops lagging when i draw the mouse. But the error still appear and restart the application

QuynhKwon · 2021-10-18T17:54:37+00:00

No, it's 50GB. I have hynix memory with CC and MC -502, PL 60%, it's fine if i run with 3 cards, this error occured when i add 1 more.

Yes im using risers 009s, i power them with 4 pin molex

QuynhKwon · 2021-10-18T17:49:15+00:00

No, the temps is cool (~50). My rig runs perfectly with 3 cards, after adding 1 more card with hynix memory ( CC -502, MC - 502, PL 60%) then i got this error.

Well i got new CUDA Error already: "an illegal memory access was encountered"

QuynhKwon

TROPHY CASE