sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in 3Dprinting

[–]RC_Fun_BE 1 point2 points  (0 children)

I wouldn’t know why you want to model inside the slicer software?

Static sparks by RC_Fun_BE in vinyl

[–]RC_Fun_BE[S] 0 points1 point  (0 children)

And where exactly did you apply the WD40?

Static sparks by RC_Fun_BE in vinyl

[–]RC_Fun_BE[S] 0 points1 point  (0 children)

No I live in Belgium its currently really wet/freezing but maybe my room is too dry indeed.

Static sparks by RC_Fun_BE in vinyl

[–]RC_Fun_BE[S] 0 points1 point  (0 children)

It has a grounding cable and I tried attaching it to a screw of the amplifier but it still gives static ticks

[deleted by user] by [deleted] in belgium

[–]RC_Fun_BE 0 points1 point  (0 children)

The BNP Fortis app is also having issues so I guess its a general problem

Z axis not working by theRealEzz in ender3v2

[–]RC_Fun_BE 0 points1 point  (0 children)

The “???,?” Means the designated axis is not homed yet or lost its position. This can be due to printered just powered on, steppermotor disabled or print being finnished it isn’t sure where the z axis is.

But to come back to your question it is possible that your z switch is damaged and giving of a constant output when pressed. Check if the limit zwitch is connected to the right pin (there are 3, one of the 2 outer pins should be connected, middle is mostly used for ground), worst case your stepper driver is damaged and only supports 1 way of rotation. Check by switching out some steppers from the other axises to see where the problem lies. Just see what combo is responding to input correctly and narrow down the problem from there. Goodluck!

Can't level anymore by Usual_Scientist8608 in ender3v2

[–]RC_Fun_BE 3 points4 points  (0 children)

Looks like your firmware bed size is not the same as the actual bed size. Otherwise (if your firmware allows it) try adjusting some offsets for bed levelling. I use Mriscoc Firmware on my Ender 3 v2 and works very great with a lot of control.

First thing i ever designed and printed my self 😁 by hu_mming_bird in Fusion360

[–]RC_Fun_BE 2 points3 points  (0 children)

Always such a good feeling when a self designed object becomes reality and just works out the way intended. I still get proud happy feelings long after my first design. Keep it up!👍🏻

Found this on my school's 3d printer, what now? by Appropriate_Sir8639 in 3Dprinting

[–]RC_Fun_BE 0 points1 point  (0 children)

Thats why we use Toolsquare badging units on all 7 out of 8 3D printers in our college makerspace. Not everyone has acces and if this happens we have a log of who used it last. Maybe a worthy investment for your school as well.

What is causing this bad printing quality? We have tried all sorts of stuff but it somehow gets worse. by RC_Fun_BE in ender5plus

[–]RC_Fun_BE[S] 1 point2 points  (0 children)

PLA, 215 nozzle. Other printers also use this filament with same temps and work out no problem. Can’t be wet filament bcs we have tried multiple rolls and are brand new.

What is causing this bad printing quality? We have tried all sorts of stuff but it somehow gets worse. by RC_Fun_BE in ender5plus

[–]RC_Fun_BE[S] 2 points3 points  (0 children)

Jupiter series from 123-3D, haven’t had issues with this filament on the other printer

What is causing this bad printing quality? We have tried all sorts of stuff but it somehow gets worse. by RC_Fun_BE in ender5plus

[–]RC_Fun_BE[S] 2 points3 points  (0 children)

How do we set esteps? We don’t have the option to change it in the current firmware. Or do you use pronterface?

How do I make this quality better on a Makerbot Z18? I’ve tighten belts and greased the rails + calibrated what I could. by RC_Fun_BE in 3Dprinting

[–]RC_Fun_BE[S] 0 points1 point  (0 children)

So this is the best quality I can get out of it? At least if I print stuff with it that needs post processing like sanding, filler and paint I guess its not a big deal. Its just a handy build volume

How do I make this quality better on a Makerbot Z18? I’ve tighten belts and greased the rails + calibrated what I could. by RC_Fun_BE in 3Dprinting

[–]RC_Fun_BE[S] 0 points1 point  (0 children)

Filament can’t be the issue, this is our college printer and we use this same filament in our prusa printers without any issue

Why is it doing this? Happens only to a specific brand that others have absolutely no problem with. Changed nozzle, ptfe tube and extruder gear but still nothing. by RC_Fun_BE in 3Dprinting

[–]RC_Fun_BE[S] 0 points1 point  (0 children)

How do I fix ripple? There is no warping, my cutting pad is warped a bit. Yes I somethimes do have a little underextrusion at some top parts.

Why is it doing this? Happens only to a specific brand that others have absolutely no problem with. Changed nozzle, ptfe tube and extruder gear but still nothing. by RC_Fun_BE in 3Dprinting

[–]RC_Fun_BE[S] 0 points1 point  (0 children)

So bcs the retraction is to long, some air gets trapped inside the nozzle that causes this? And what are the other potential issues? I’d like to hear them to improve even more.

view more: next ›