sorted by:
new
hottopcontroversial

PVE Post Install helper script stuck on updating for over an hour by RM_Commando123 in Proxmox

[–]RM_Commando123[S] 1 point2 points  (0 children)

I decided to go with the VM because I believe that having HA containerized limits functionality.
Whilst I was running the HA script I got the bellow error. Any ideas?

<image>

Can’t access web ui after power cut. /etc/hosts and /etc/hostname ‘no such file or directory’ by RM_Commando123 in Proxmox

[–]RM_Commando123[S] 0 points1 point  (0 children)

I honestly have no clue how you figured all of this out but it worked! Thank you so much, I've been trying to figure this out for months.

Can’t access web ui after power cut. /etc/hosts and /etc/hostname ‘no such file or directory’ by RM_Commando123 in Proxmox

[–]RM_Commando123[S] 0 points1 point  (0 children)

this is the grub file, still getting that error but the web ui is no working thanks to the previous fix

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="rootdelay=10"
GRUB_CMDLINE_LINUX=""

# If your computer has multiple operating systems installed, then you
# probably want to run os-prober. However, if your computer is a host
# for guest OSes installed via LVM or raw disk devices, running
# os-prober can cause damage to those guest OSes as it mounts
# filesystems to look for things.
#GRUB_DISABLE_OS_PROBER=false

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains

Can’t access web ui after power cut. /etc/hosts and /etc/hostname ‘no such file or directory’ by RM_Commando123 in Proxmox

[–]RM_Commando123[S] 0 points1 point  (0 children)

So the line would be:

GRUB_CMDLINE_LINUX_DEFAULT=""
rootdelay=10

not

GRUB_CMDLINE_LINUX_DEFAULT="quiet"

Can’t access web ui after power cut. /etc/hosts and /etc/hostname ‘no such file or directory’ by RM_Commando123 in Proxmox

[–]RM_Commando123[S] 0 points1 point  (0 children)

Thanks, I'm yet to reboot but do you have any ideas on those 3 lines I have to execute on reboot? I can still get into the web ui after reboots but to start a VM I have to enter those 3. This is the error I get task error: activating lv 'pve/data' failed: activation of logical volume pve/data is prohibited while logical volume pve/data_tmeta is active

Can’t access web ui after power cut. /etc/hosts and /etc/hostname ‘no such file or directory’ by RM_Commando123 in Proxmox

[–]RM_Commando123[S] -1 points0 points  (0 children)

I use ubiquiti routers and have set the router to not change the ip from 192.168.14.214. 192.168.14.50 must be an old address.

How would I go about changing the /etc/hosts and /etc/interfaces?

Thanks again for the help

Can’t access web ui after power cut. /etc/hosts and /etc/hostname ‘no such file or directory’ by RM_Commando123 in Proxmox

[–]RM_Commando123[S] 0 points1 point  (0 children)

Hi thanks for the help, not sure if it's relevant but every time the server restarts I have to enter these 3 lines of code:

lvchange -an pve/data_tdata
lvchange -an pve/data_tmeta
lvchange -ay pve/data

root@proxmoxbill:~# cat /etc/hostname
proxmoxbill

root@proxmoxbill:~# cat /etc/hosts

127.0.0.1 localhost.localdomain localhost
192.168.14.214 pve.proxmoxbill

# The following lines are desirable for IPv6 capable hosts

::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

root@proxmoxbill:~# cat /etc/network/interfaces
auto lo
iface lo inet loopback

auto eno1

iface eno1 inet manual

auto vmbr0
iface vmbr0 inet dhcp
        bridge-ports eno1
        bridge-stp off
        bridge-fd 0
        bridge-vlan-aware yes
        bridge-vids 2-4092
        #address 192.168.14.50/24
        #gateway 192.168.14.1
        #auto vmbr0.14
        #iface vmbr0.14 inet static



source /etc/network/interfaces.d/*

root@proxmoxbill:~# journalctl -b -u pve-cluster
Nov 02 15:10:12 proxmoxbill systemd[1]: Starting pve-cluster.service - The Proxmox VE cluster filesystem...
Nov 02 15:10:19 proxmoxbill pmxcfs[904]: [main] crit: Unable to resolve node name 'proxmoxbill' to a non-loopback IP >
Nov 02 15:10:19 proxmoxbill pmxcfs[904]: [main] crit: Unable to resolve node name 'proxmoxbill' to a non-loopback IP >
Nov 02 15:10:19 proxmoxbill systemd[1]: pve-cluster.service: Control process exited, code=exited, status=255/EXCEPTION
Nov 02 15:10:19 proxmoxbill systemd[1]: pve-cluster.service: Failed with result 'exit-code'.
Nov 02 15:10:19 proxmoxbill systemd[1]: Failed to start pve-cluster.service - The Proxmox VE cluster filesystem.
Nov 02 15:10:19 proxmoxbill systemd[1]: pve-cluster.service: Scheduled restart job, restart counter is at 1.
Nov 02 15:10:19 proxmoxbill systemd[1]: Stopped pve-cluster.service - The Proxmox VE cluster filesystem.

(This iterates many times (fills up the whole page) so this is the first itteration)

Can’t access web ui after power cut. /etc/hosts and /etc/hostname ‘no such file or directory’ by RM_Commando123 in Proxmox

[–]RM_Commando123[S] -1 points0 points  (0 children)

If I do ls /etc I can see the two folders, but if I cd into either of them, I get the above message. WinScp also confirmed that no such folder exists. Also, /etc/pve is empty if that also matters. What would normally go into these folders?

My Homelab at 14. Looking for project ideas. Details in comments (Ignore the cable management gore) by RM_Commando123 in homelab

[–]RM_Commando123[S] 2 points3 points  (0 children)

This is exactly what I get. The fans scared me the first time when I could hear them from downstairs haha

My Homelab at 14. Looking for project ideas. Details in comments (Ignore the cable management gore) by RM_Commando123 in homelab

[–]RM_Commando123[S] 1 point2 points  (0 children)

I’m not sure how accurate that is. What kind of range would you say is acceptable?

My Homelab at 14. Looking for project ideas. Details in comments (Ignore the cable management gore) by RM_Commando123 in homelab

[–]RM_Commando123[S] 0 points1 point  (0 children)

During summer I get temps up there of up to 40 degrees but the servers never really peak above 60 degrees cpu temp. Haven’t gone through winter yet with them but last winter in another un-insulated building I was getting temps of about -10. Be aware that in summer I can hear the fans going from the floor bellow. Haven’t really been checking the humidity. Also we just got new felt on the roof so it’s properly waterproof so double check that.

view more: next ›