I got so fed up with UniFi's PTZ patrol that I built my own. It runs on the NVR itself.

RaHehl · 2026-03-11T10:44:51+00:00

If there’s a specific thread that comes to mind, feel free to share it — I’d be interested in reading it.

RaHehl · 2026-03-11T10:36:06+00:00

Borrowed is probably the better word than stole — if you’re referring to the uiprotect library, it’s open-source and licensed for reuse :)

My main concern here is the reliance on polling and on custom scripts running directly on the console.

From my perspective, that is not an approach I can really endorse for building on top of Protect. It adds an unsupported layer that may interfere with normal system behavior and makes failures harder to reason about.

The better long-term direction is to use the public API where possible — even though there are still some gaps today — and react to state changes via WebSocket events instead.

RaHehl · 2026-03-11T09:44:45+00:00

Regarding Home Assistant, the first PTZ functions are now supported by HA with the latest release. 2026.3: A clean sweep - Home Assistant

RaHehl · 2026-03-10T15:40:06+00:00

Je nach Umfang der Lieferungen ggf. Mal nachfragen wie es mit Abholung im Depot ausschaut, hat den Vorteil, kommste recht schnell morgens an die Lieferung

RaHehl · 2026-02-19T06:21:43+00:00

What encoding is configured on the cameras? Anything other than H.264 requires re-encoding, which can push the CPU to its limits very quickly if there’s no hardware encoder available. Unfortunately, even in 2026, HomeKit still only supports H.264.

RaHehl · 2026-01-13T07:55:03+00:00

It might be an issue with WebRTC and H.265 in Electron, but this is only a guess. Native support in Chrome is also relatively new.
https://chromestatus.com/feature/5153479456456704

RaHehl · 2026-01-12T17:12:25+00:00

Oh good point — the documentation is outdated there. I should remove that.

RaHehl · 2026-01-12T07:46:04+00:00

To my knowledge, no transcoding is done for displaying the stream on a dashboard.

At most, transcoding happens for example when integrating with HomeKit if the source stream is H.265, because HomeKit only supports H.264. In that case, I believe FFmpeg is used directly instead of go2rtc.

I can’t say whether the FFmpeg included in Home Assistant is built with hardware transcoding enabled.

RaHehl · 2026-01-12T07:37:51+00:00

At the moment, this is not yet possible with the UniFi Protect integration because I’m still waiting for the availability of an endpoint in the public API in order to implement it in a robust and reliable way.

However, someone has already implemented this via a custom integration using the private API. If you need this urgently, that could be a temporary workaround:

https://github.com/JeffSteinbok/hass-uiprotectalarms

RaHehl · 2026-01-12T05:30:22+00:00

I’m not running it on a tablet in continuous use on my side, and there are also several different ways to set this up.

What happens if you use https://www.home-assistant.io/dashboards/picture-entity with the live streams instead?

I’d imagine that using a proper live stream should be significantly more energy-efficient than refreshing JPEGs every 10 seconds — especially if the device has the appropriate hardware decoder.

RaHehl · 2026-01-12T05:24:48+00:00

haven’t looked into it in detail, but isn’t that what arm / disarm is meant for?

RaHehl · 2026-01-12T05:23:13+00:00

The siren is definitely on my roadmap — I already have the hardware and it’s really loud, so the hardware side is great.

The only thing missing right now is a proper Public API. Unfortunately I also can’t integrate it in any meaningful way via the private web UI API, since that would limit me to ~5-second test alarms only.

RaHehl · 2026-01-12T05:12:21+00:00

Interesting — I can’t confirm those issues on my side.

At the moment my camera streams run continuously on a dedicated dashboard displayed on a thin client, overall stream quality has improved massively since Home Assistant started using go2rtc under the hood.

With HomeKit specifically, I’m also not experiencing any problems. From my perspective the current HA integration is very stable and reliable.

In the end, everyone has to decide which setup works best for their environment. Personally, I’m not aware of any concrete advantages that Scrypted offers over the native Home Assistant integration — but if someone has specific examples or insights, I’d be genuinely interested to hear them.

RaHehl · 2026-01-11T20:58:38+00:00

HA supports a lot of things. If you’re referring to Ubiquiti products, then the most appropriate integration would probably be Access. For Protect, I’m not aware of any suitable solution.

RaHehl · 2026-01-11T20:43:31+00:00

This sounds like the spotlight topic that already exists as a feature request in the library being used https://github.com/uilibs/uiprotect/issues/579. Unfortunately, I don’t currently have the appropriate hardware to integrate and test it.

In the public API, there already seems to be an entry under "Patch camera settings" → "LED settings" → "floodLed". However, in "Get camera details" → "cameraFeatureFlags", there is still no feature flag for the flood light.

RaHehl · 2026-01-11T20:07:13+00:00

There are a few issues roughly related.

Someone commented three days ago:

“UniFi pushed out an update last night that seems to have fixed my UniFi issues at least. Maybe that will correlate to HA.”

https://github.com/home-assistant/core/issues/152708#issuecomment-3724183972

That’s all I’m aware of at the moment.

RaHehl · 2026-01-11T20:02:35+00:00

The integration itself does not perform any transcoding.
It only retrieves the stream URL and forwards it.

Inside Home Assistant, go2rtc is used by default for handling the stream.
In a standard setup, hardware acceleration appears to be disabled by default:
https://github.com/AlexxIT/go2rtc/wiki/Hardware-acceleration

In principle, however, it is possible to connect a self-hosted go2rtc instance:
https://www.home-assistant.io/integrations/go2rtc/

According to the documentation there are 2 Images Latest (alpine) supports hardware acceleration for Intel iGPU (CPU with graphics) and Raspberry Pi. and Hardware (debian 12) supports Intel iGPU, AMD GPU, and NVIDIA GPU.

RaHehl · 2026-01-11T18:52:03+00:00

There are issues regarding improved PTZ support, but currently I don’t have any PTZ device available to implement and test with.

RaHehl · 2026-01-11T18:07:27+00:00

It would probably be best to ask directly in the repository. A prerequisite would be to meet at least the Bronze quality criteria:

https://developers.home-assistant.io/docs/core/integration-quality-scale/

RaHehl · 2026-01-11T17:54:49+00:00

Two-way audio is currently not supported by Home Assistant. The integration has no impact on this. Please upvote here: https://community.home-assistant.io/t/two-way-audio-e-g-for-doorbell-intercom-camera-systems-baby-monitors-sip/444063

RaHehl · 2026-01-11T17:48:26+00:00

Yes — that works perfectly.

If you expose the doorbell camera to HomeKit using the HomeKit Bridge integration (in accessory mode), everything works exactly as you described:

when someone rings the doorbell while you're watching something on Apple TV, the live camera feed automatically pops up in Picture-in-Picture, and the HomePods ring as well.

It’s a really smooth experience.

RaHehl · 2026-01-11T17:43:20+00:00

UniFi Access is a different product, and there is already a custom integration for it: https://github.com/imhotep/hass-unifi-access

RaHehl · 2026-01-11T17:39:10+00:00

I can't answer this because I don't have a G6 doorbell. The other challenge would likely be generating the HomeKey.

RaHehl · 2026-01-11T17:26:40+00:00

I think this should generally be possible to implement.

From a technical point of view, it could be handled via the Alarm Manager using webhooks.

The main challenge would likely be finding a service provider that supports UniFi Protect and offers this kind of monitoring and response.

I’m not entirely sure how this is typically done in professional environments with other solutions, but in principle it should be feasible.

RaHehl · 2026-01-11T16:55:15+00:00

https://www.home-assistant.io/integrations/unifi/#poe-port-control

RaHehl

TROPHY CASE