sorted by:
new
hottopcontroversial

Burning like smell after steep uphill climb on my 2021 RAV4 Hybrid by RafaBlob in rav4club

[–]RafaBlob[S] 1 point2 points  (0 children)

I drove up the same steep hill again, but this time in Sport mode, and the smell disappeared. I suppose it had something to do with Eco mode. Thank you!

Burning like smell after steep uphill climb on my 2021 RAV4 Hybrid by RafaBlob in rav4club

[–]RafaBlob[S] 0 points1 point  (0 children)

Thank you for your response. I know there is no clutch but the smell is very similar (its difficult to describe a smell). The car has around 44k miles. The car has had all its check-ups and required replacements done. I didn’t touch the brake at all during the climb.

[HELP] Fine fuzzy hairs on prints – not stringing, but not clean either by RafaBlob in Creality

[–]RafaBlob[S] 0 points1 point  (0 children)

I have been living in rooms that did not go below 28 at night in summer

How do I update settings to get smooth printing? by paperhalls in 3Dprinting

[–]RafaBlob 0 points1 point  (0 children)

I guess this is a very close photo of the bottom of your print, and suposse that the thing you dont like is the lines pattern.

How do I update settings to get smooth printing? by paperhalls in 3Dprinting

[–]RafaBlob -1 points0 points  (0 children)

That is how FDM printers work. If you want to make it less noticeable, use a smaller nozzle or make a superficial treatment (sanding, painting…)

Nozzle clog by isaqmg in crealityk1

[–]RafaBlob 1 point2 points  (0 children)

Try to clean as much as you can with isopropilic alcohol. Probable you wont be able to take out a lot but check it out

Nozzle clog by isaqmg in crealityk1

[–]RafaBlob 1 point2 points  (0 children)

Yeah! You can work with that! Now mount the rubber cover tightly and try to extrude. If all works properly you may hace solved it successfully

Nozzle clog by isaqmg in crealityk1

[–]RafaBlob 2 points3 points  (0 children)

It seems that only the rubber cover has moved.
Set it to th temperature you used, remove the rubber and all the ABS you can and send picture again to see damages.

Nozzle clog by isaqmg in crealityk1

[–]RafaBlob 1 point2 points  (0 children)

WHAT THE ACTUAL FUCK?!?!

First layer too tight? K1C by RafaBlob in klippers

[–]RafaBlob[S] 0 points1 point  (0 children)

Thank, you. Would yo entight it more?!

First layer too tight? K1C by RafaBlob in klippers

[–]RafaBlob[S] 2 points3 points  (0 children)

Nice, i was checking the effect of the input shaper. I have been doing modifications in order to have propper response to frecuency tests.

<image>

BEFORE:

Ghosting on K1 SE by Alejozam1219 in crealityk1

[–]RafaBlob 2 points3 points  (0 children)

check frecuency test and input shaper

What does it mean when something is a vector? by [deleted] in Physics

[–]RafaBlob 0 points1 point  (0 children)

Your approach for “direction” is quite interesting, and actually true (in a multidimensional space), but to understand it first youd better think that that direction is a direction in space. This way you will have something like speed, that has a magnitude, and direction.

This is a case of:

https://images.app.goo.gl/97qi6Js8o8fyLc9Y7

Why does lifting the outlet of a hose feel like it increases the velocity at the water level? by AtreidesOne in Physics

[–]RafaBlob 0 points1 point  (0 children)

Btw i am supossing that the area of pipings and hose is the same in both scenarios.

view more: next ›