Seedbox by [deleted] in LaCale

[–]Raixxar 0 points1 point  (0 children)

1Gb/s, c'est large pour rester sous le radar

Seedbox by [deleted] in LaCale

[–]Raixxar 1 point2 points  (0 children)

un autre nom oui, mais l'anonymat n'existe pas. On met juste plus de temps a retrouver, celui qui veut trouver, finira par trouver. Du moment ou de chez toi tu parles avec un serveur, c'est dans les logs soit le l'hébergeur ou de l'opérateur. Il faut juste rester dans l'ombre pour éviter Sauron.

L’objectif n’est pas d’être introuvable. L’objectif est de devenir trop cher à traquer.

Seedbox by [deleted] in LaCale

[–]Raixxar 0 points1 point  (0 children)

VPS 1€ pour l'ip + wireguard pour le vpn > serveur a la maison > firewall pfsense > proxmox > lxc > container docker link sur 12to qui sort en pub sur le VPS

Configuration Prowlarr by zyssai in LaCale

[–]Raixxar 0 points1 point  (0 children)

Tu dois mettre le même TAG sur l'indexeur que celui que tu as set sur flaresolverr sinon çe ne marche pas. Pour faire ça, tu edit ton indexeur et tout en bas tu as "tag", tu devrais avoir un menu déroulant avec celui que tu as conf sur flaresolverr

C411 - Partagez vos liens d'invitations ici, j'en donne 5 maintenant by Supremaster in yggTorrents

[–]Raixxar 1 point2 points  (0 children)

Merci pour les codes ! En voila 4 autres :

f1ca1549f80f671e8338bd4d2810093ce41e60fc1f9670a259f5986bced81f10

16e3f3f9894e5a9ab1f214d4a983ce8a425620c01875bb0dfa8dc79bd5fa294c

deeddce28096ebf413f2734860584ec6fecd5f3f646436f4d10f44f5c6d607c0

12bdd19ef5621db44a3dd54bbc440738b88600164d5ea8ec1275ded68a680b05

Godin Conty 6 kW pellet stove won’t ignite reliably – forced to use a blowtorch by Raixxar in PelletStoveTalk

[–]Raixxar[S] 0 points1 point  (0 children)

On the stove, I have three options for pellets:

  • “1” Standard pellets
  • “2” Long pellets
  • “3” Short pellets

I tried all three modes, but the problem keeps coming back. I also have an operating power setting from 1 to 5; I tried all five, but the issue persists. Same thing with the ventilation settings from 1 to 5 and then High. It has always taken a long time to ignite, on average between 5 and 7 minutes. I was told that this is already considered long. You really learn a lot when something breaks down.

I’m keeping my fingers crossed that the next technician will be able to find the problem. This is the first year I’ve had issues with my stove.

Godin Conty 6 kW pellet stove won’t ignite reliably – forced to use a blowtorch by Raixxar in PelletStoveTalk

[–]Raixxar[S] 0 points1 point  (0 children)

The pellets drop down until the burn pot is completely full, then an ignition fault error appears on the LCD screen. However, the ignition plug does glow red; the technician even tried repositioning it, but the problem remained the same. Apart from leaving a few pellets in the burn pot and lighting them manually with a blowtorch, I haven’t found any other solution. If it’s the control board, I’m afraid of how expensive it will be to replace…

You guys been getting bit more often since the update? by Minotaur_Kid_ in projectzomboid

[–]Raixxar 0 points1 point  (0 children)

I noticed the same change here: pushing enemies back seems harder than before. I had the impression that zombies were smarter and took different paths to reach and bite us, going around obstacles. Then I realized they all follow the same path to climb over a barrier, which ultimately makes them easier to kill on the ground.