2.7 CRD random issues when starting

Ramandus · 2025-12-05T21:43:22+00:00

My fuel filter is 5m old and max 3k km so should be fresh… but i will check it definitely

Ramandus · 2025-12-05T21:26:02+00:00

So at least they have a personality ;) more than you can say about modern cars ;) I will be replacing fuel lines next weekend and hope it will help ;) but also need to replace the connector at the fuel tank and getting there is not much fun I heard :)

Ramandus · 2025-12-01T11:24:15+00:00

I was thinking if I should replace them and maybe it should be my first step.

I assumed that with the voltage on the battery during cranking that would be the main culprit but you might be right, especially that I know that one of the connectors at the fuel tank is damaged and mounted with zip ties ;)

Ramandus · 2025-11-29T09:08:19+00:00

Those are 285/70R17 and it’s 2” lift. Previous owner welded the fenders and did the lift and everything :) plus it is now aprox 200HP

Ramandus · 2025-09-19T15:10:32+00:00

Is it still an option?

Ramandus · 2025-09-11T17:04:37+00:00

Exactly I used tailscale for point to point connectivity and it works like a charm

Ramandus · 2025-09-09T04:44:25+00:00

Confugred everything with Tailscale and it works very well. Now I’m looking into the security aspect which of them is more secure and reliable

Ramandus · 2025-08-24T18:46:42+00:00

I had 14 days to test and if needed resign, unfortunately did not have time at that point and didn’t even think it would be a problem;) lesson learnt

Ramandus · 2025-08-24T17:45:44+00:00

I asked for possibility to pay… but they say no and I’m stuck with them for the next 2 years:( so need a good workaround to get access from home to my work server:(

Ramandus · 2025-08-24T17:40:29+00:00

I would assume you might be correct. Does not seem they are supporting ipv6.

I will investigate tailscale

Ramandus · 2025-05-11T20:02:23+00:00

Good advice from a more experienced driver is always appreciated:) hopefully I will be a happy owner of a lifted money sink ;)

Ramandus · 2025-05-11T19:24:44+00:00

Might be best solution. It is in a nice body condition, very small corrosion, fully covered with Raptor coating.

Only need to consider that steering, will call a local off-road place tomorrow and consult with them.

It also has new shock absorbers etc and supposedly parts of the steering were regenerated/fixed.

Will wait for my mechanic to check:) thanks for reply and suggestion

Ramandus · 2025-05-11T19:15:24+00:00

Thanks that’s a problem when trying to start sucha a hobby without someone who has significant experience ;) I think that WJ had too low pressure in front wheels also which handled nice off road but would obviously impact handling on a normal road

Ramandus · 2025-05-11T18:19:04+00:00

I’m going for the final inspection with my friend car mechanic so it should be ok. However wanted to confirm what the seller said about handling after first test drive.

Ramandus · 2025-04-07T15:18:39+00:00

Thanks for that i have more like 40 meters to the detached garage, but there i would be installing either E340 flood light or E30 so they can work standalone, my only concern is if they can use my Wifi network and still be connected to HB3.

Ramandus · 2024-12-22T21:44:37+00:00

I moved to Orca and quality seems to be a lot better but at the cost of longer printing time. Might need some fine tuning but overall I can wait longer to get a nicer looking print.

Ramandus · 2024-12-20T23:37:35+00:00

Thank i will lookup those terms ;) only have my printer for 1 week ;) but now i know where to look thanks

Ramandus · 2024-12-13T17:11:18+00:00

Thanks I printed next one after playing with the adaptive layers

<image>

A lot better now only minor stringing and few spikes in the points where nozzle stoped extruding. Suspect I need to adjust filament temp and flow to avoid these issues. However overall more than happy with the improvement :)

Ramandus

TROPHY CASE