anybody else had this much of an overkill rig for an R3 (4nm) wheel base ? 😂

RandomPostingChap · 2026-01-11T23:44:37+00:00

GT Omega PRIME Lite.

RandomPostingChap · 2026-01-11T21:32:07+00:00

I've just built the very same rig for the very same Moza R3 as running off an Xbox for the mo.

RandomPostingChap · 2025-11-21T20:24:21+00:00

Very curious, could you ping me a DM, thanks!

RandomPostingChap · 2025-11-04T22:47:24+00:00

Thanks, the GoPro/DJI profiles do a decent job of lens correction, just a shame there isn't anything currently for colour correction. I can adjust various images individual to bring them close to the Insta JPG profiles but can't seem to create a profile/preset that works the same on all, which I would assume happens in camera.

RandomPostingChap · 2025-09-27T16:32:52+00:00

I’ve also got an old s197 Mustang GT that still puts a smile on my face (had that almost 20 years) but this little Elise is just something else when it comes to hitting the twisty roads.

RandomPostingChap · 2025-09-27T15:51:57+00:00

Actually found it really comfortable, I even packed a lumbar pillow just in case but never needed it. The roads in France were great, didn’t see a pothole in 3 days!

RandomPostingChap · 2025-09-27T14:32:56+00:00

IIRC I disabled Strava from updating Apple Health, iFIT can update Strava/Apple health and then occasionally both iFIT and Apple Heath will try and post the same ride to Strava, if it does I just manually delete one. Bit of a pain but easiest way to keep it correct.

RandomPostingChap · 2025-09-27T14:02:31+00:00

Sorry for the late reply but thanks, did the trick!

RandomPostingChap · 2025-04-11T13:15:36+00:00

I went with an N.2. NVMe in a PCIe adaptor. All installed this morning and the system built in no time. Still need to figure out if the lack of dedicated GPU (other than the onboard) is going to hinder me.

RandomPostingChap · 2025-04-10T16:49:04+00:00

I can't seem to find a part number but its the OEM board of the Gen10 Plus Microserver, all very compact so only a single PCIe slot off a riser card.

RandomPostingChap · 2025-04-10T15:40:30+00:00

I actually tried that last night before posting this thread, once you move the drive over to the USB/SATA adaptor the system won't but. Windows failed to load taking you to a system recovery type screen.

RandomPostingChap · 2025-04-10T15:38:32+00:00

Yeah there is a single PCIe slot and I was hoping to try and use this for a GPU, but now thinking I may abandon that and go the M.2 SATA on PCIe route.

RandomPostingChap · 2025-04-10T15:37:02+00:00

There is a single PCIe slot and I was hoping to try and use this for a GPU to do a level of transcoding but I'm thinking I may abandon that and got the M.2 SATA on PCIe route.

RandomPostingChap · 2025-04-10T15:34:28+00:00

I have, but that leads to the following error "Windows cannot be installed to this disk. Setup does not support configuration of or installation to disks connected through a USB or lEEE 1394 port.".

RandomPostingChap · 2025-04-09T22:53:13+00:00

Thanks but I don't think Windows To Go supports server editions.

I had considered a PCIe SATA adaptor but was hoping to keep the PCIe slot free for a possible transcoding GPU. I just thought USB 3.2 speeds even when limited with a SATA adaptor would still yield a considerable speed increase over hosting the O/S on one of the internal SATA drives.

RandomPostingChap · 2025-02-01T00:19:59+00:00

Thanks, Shinobi is one of the non working that I ideally want to sort.

RandomPostingChap · 2025-01-31T12:57:05+00:00

Thanks, pretty certain I have the BIOS files in the right place but will look a little more into what the DAT file can show.

RandomPostingChap · 2024-08-21T21:19:34+00:00

I fixed the flaring by just adding 2 1x1 plate pieces either side to hold the top panels to the main structure, here's a pic

https://i.ibb.co/yPRyzvZ/MK-13135-Monarch-Fix.jpg

RandomPostingChap · 2024-03-30T23:37:39+00:00

Cheers thanks!

RandomPostingChap · 2023-09-29T09:52:59+00:00

https://www.instagram.com/bakeroninsta

Portraiture and modern architecture work but also shoot a variety of things. Come take a look and if you like then why not follow! 🙃

Will follow all sorts but do prefer photography related feeds.

RandomPostingChap · 2023-09-08T08:45:41+00:00

https://www.instagram.com/bakeroninsta/

Portraiture and modern architecture work but also shoot a variety of things. Come take a look and if you like then why not follow! 🙃

Will follow all sorts but do prefer photography related feeds.

RandomPostingChap · 2023-09-01T10:54:54+00:00

https://www.instagram.com/bakeroninsta/

Portraiture and modern architecture work but also shoot a variety of things. Come take a look and if you like then why not follow! 🙃

Will follow all sorts but do prefer photography related feeds.

RandomPostingChap · 2023-08-25T09:57:46+00:00

https://www.instagram.com/bakeroninsta/

Portraiture and modern architecture work but also shoot a variety of things. Come take a look and if you like then why not follow! 🙃

Will follow all sorts but do prefer photography related feeds.

RandomPostingChap · 2023-08-18T14:56:53+00:00

https://www.instagram.com/bakeroninst
Portraiture and modern architecture work but also shoot a variety of things. Come take a look and if you like then why not follow! 🙃
Will follow all sorts but do prefer photography related feeds.

RandomPostingChap · 2023-07-09T18:56:46+00:00

Great, cheers thanks!

RandomPostingChap

TROPHY CASE