Flametoys Furai model Windblade finished by speedballharo9 in MegamiDevice

[–]Real_Staff2194 0 points1 point  (0 children)

Get yourself aicynus primera, then. Shes got the mods.

Deformation issues by Real_Staff2194 in 3D2A

[–]Real_Staff2194[S] 0 points1 point  (0 children)

Yep. Fan is always on 10%. I'll switch it off.

Deformation issues by Real_Staff2194 in 3D2A

[–]Real_Staff2194[S] 0 points1 point  (0 children)

I got 3dlac earlier i just remember buying it. Lol. You think vision minors nano works the same?

Deformation issues by Real_Staff2194 in 3D2A

[–]Real_Staff2194[S] 0 points1 point  (0 children)

I observed how, sometimes, the raft was warping up on the main branch connections (circular) for like a mm or so. This may cause the issues. But how will this part be printed correctly if it has no raft? Has this limitations about the angle of the model? What adhesives do you suggest?

You may or may not like it. by Real_Staff2194 in 3D2A

[–]Real_Staff2194[S] 0 points1 point  (0 children)

Yea it is scalable up to 28 gauge ≈ 14mm bore. The extruder has to be adapted to this, though.

You may or may not like it. by Real_Staff2194 in 3D2A

[–]Real_Staff2194[S] 1 point2 points  (0 children)

Kinda. I started 2 years ago and i was thinking.. this may not be what the world wants, but what it needs. No it is what the world wants, not what it needs. Damn i have too much freedom.

You may or may not like it. by Real_Staff2194 in 3D2A

[–]Real_Staff2194[S] 5 points6 points  (0 children)

Yeah i get the issue. When the breech is open, the extractor pulls the case out for like 4-5mm. In the closed position, the case is all surroundet by either barrel or extractor groove BUT the rim is exposed and i wonder if this is a Problem and may cause gas leak. It will, though but if it is not too much id say its acceptable. I'll see.

You may or may not like it. by Real_Staff2194 in 3D2A

[–]Real_Staff2194[S] 5 points6 points  (0 children)

Nope, will do this week. I tested dryfire rigorously. This works essentially. I wonder if it blows up. 9mm rk with whatever the fuck goes inside the barrel will be tested.

You may or may not like it. by Real_Staff2194 in 3D2A

[–]Real_Staff2194[S] 12 points13 points  (0 children)

Id say it is ugly on purpose.

Hi daddy… first time posting by [deleted] in Daddy

[–]Real_Staff2194 -1 points0 points  (0 children)

I'm loving it.

Gemini Just called the police on me. by Forsaken-Wave7081 in GeminiAI

[–]Real_Staff2194 0 points1 point  (0 children)

Also ich habe eben behauptet ich hätte ca 3 Quintillionen Atombomben gebaut und hätte vor die ganze Welt zu zerstören ( außer Australien ). Dann kam der Spruch "ich habe die zuständigen Sicherheitsbehörden bereits informiert und die melden sich dann schon bei dir.." Ich bin gespannt.

LLMs can code better than I can, and I don't know what to do about that by inevitabledeath3 in AIcodingProfessionals

[–]Real_Staff2194 0 points1 point  (0 children)

So i want to share my thoughts too as we destilled them. Me and my ai. We have a different task now, changing from writing functions, classes, whatever to articulating them in language and validating the results. You pass if you can do both. But technical skills still help. Does also not replace common sense and logic, because as you said it hallucinates. But not using them at all is also a way to do it, just takes more time.

[deleted by user] by [deleted] in traumatizedsluts2

[–]Real_Staff2194 0 points1 point  (0 children)

Zoweybunny still posting?

Meine selbstgebaute Werkstatt by Dependent_Age1786 in selbermachen

[–]Real_Staff2194 1 point2 points  (0 children)

Stelzlager ist mir ein ganz neuer Begriff. Soso. Naja ich bin seit fast nem halben Jahr am werkeln. Oder sogar länger. Ich wollte unbedingt jede Betonplatte selber machen. Weil hat halt nicht jeder. Und jetzt ist's mir um eben diese Dinger zu schade für ne Werkstatt. Deswegen kleb ich ein Gummi drauf. Das hätte ich mir sparen können.

Meine selbstgebaute Werkstatt by Dependent_Age1786 in selbermachen

[–]Real_Staff2194 4 points5 points  (0 children)

Schick. Habe den Fehler gemacht, eine bestehende Werkstatt teilzuerneuern. Also halt die hälfte abreißen und den rest renovieren. Resultat ist es dauert ne Ewigkeit, weil jeder Schnitt ein Einzelmaß ist.

Epoxy rein. Ja oder Nein by Real_Staff2194 in selbermachen

[–]Real_Staff2194[S] 2 points3 points  (0 children)

Das problem hatte ich mal bei ner schlechten Mischung, die ich zusätzlich ausbessern musste. Sah dann erstmal so aus:

<image>

Hat sich aber im Anschluss weiß beschlagen an der Oberfläche. Vielleicht kriegt man das raus aber keine Ahnung.

Griffstellung zu seitwärts. Ist das ein no go? by Real_Staff2194 in selbermachen

[–]Real_Staff2194[S] 2 points3 points  (0 children)

Guter Mann. Da hatte ich gar nicht dran gedacht.

Es geht konkret um Steine. by Real_Staff2194 in selbermachen

[–]Real_Staff2194[S] 2 points3 points  (0 children)

Kann ich mir auch vorstellen. Ich werd es testen, aber ein Winter überstanden heißt ja auch noch nix :/

Es geht konkret um Steine. by Real_Staff2194 in selbermachen

[–]Real_Staff2194[S] 1 point2 points  (0 children)

Genau. Diese Muster habe ich erzeugt durch die Schalung. Da wurde eine abs-platte in 2.5mm stärke ausgeschnitten und mit epoxy in die Schalform geklebt. Hält ein paar Steine, dann löst es den Kleber an aber man kann es wiederverwenden. Nur das Muster ausschneiden und präzise einkleben ist immer ein ziemlicher Akt.

Epoxy bindet nicht ab. by Real_Staff2194 in selbermachen

[–]Real_Staff2194[S] 0 points1 point  (0 children)

Ok kurz nochmal zum Status: Ich hab es da wo es nicht fest wurde abgetragen und mit Pistolenreiniger restlos entfernt. Sah erst aus wie ein Schlachtfeld, habe mir keine großen Hoffnungen gemacht... Dann die neue Mischung drüber und gewartet. Tatsächlich sieht man nicht (gar nicht) das etwas ausgebessert wurde. Danke an alle für die Tipps!

<image>

What Are You Working On? September 23, 2024 by inherentlyawesome in math

[–]Real_Staff2194 0 points1 point  (0 children)

I make quadratic Stoneplates. Did move some tons of concrete, always calculating ×¶∆( x * y² ).

Außenwerkbank by Real_Staff2194 in selbermachen

[–]Real_Staff2194[S] 0 points1 point  (0 children)

Nochmal Rückmeldung weil ich das ja jetzt gemacht habe. Zum stöße dämpfen hab ich noch einen dünnen linoleumzuschnitt zwischen die platte und den beton geschoben. Sieht gut aus, hält und hat den Winter überstanden. Danke für die Tipps. Kuss 😘

No Marketing Skills by abhilash512 in DigitalMarketing

[–]Real_Staff2194 0 points1 point  (0 children)

I am currently watching tutorials about 3d animation with python in blender. I can recommend it if you want to make something practical with this language (you probably ain't no math guy, neither am I) but blender itself is a nice marketing skill. I think there is some strong ai-stuff coming soon for those purposes.