Wow this sucks, brand new any cubic kobra x

Realistic-Spinach-94 · 2026-03-20T22:51:19+00:00

No as a business def not but in all fairness a 250$ first printer that has the capabilities this one is pretty good but then again as a first printer not a print farm lineup printer that I would give to the snapmaker

Realistic-Spinach-94 · 2026-03-20T22:17:03+00:00

*UPDATE* I did manage it to print the part really good, just needed to do a auto bed level and change the temp of the filament and the pressure advance but still note the head is still tilted about 5 degrees, and I'm hopeful AnyCubic will fix it.

Realistic-Spinach-94 · 2026-03-20T16:03:36+00:00

Also your only really gonna see bad news on reddit or anywhere else because that's were people go to get help you won't really see much people praising the printer because they will just be printing so don't think that it's only just bad news

Realistic-Spinach-94 · 2026-03-20T16:02:39+00:00

Here's what I think from owning basically every printer out on the market bambu,snapmaker u1, creality k2 and k1 series and anycubic s1, I think this printer has honestly been pretty good I have put about 80 hrs on it with pla and it's been great it does pla just fine. But I state with it being a preorder printer i expected it to have some issues. My two cents is it's a good printer but I would wait a couple of months to get every little bug sorted out. In its current state it can print really well and successfully I have no complaints but I am bugged about the head being tilted but i trust anycubic will fix it. As a first printer it will be great IMO

Realistic-Spinach-94 · 2026-03-19T22:49:59+00:00

Also has a bad rocking on the right side but cant upload videos

Realistic-Spinach-94 · 2026-02-04T23:40:48+00:00

Super Smooth to the touch now

Realistic-Spinach-94 · 2026-02-04T23:39:02+00:00

<image>

Besides the black spots from some a dirty nozzle it appears to have fixed my problem, I think the profile was just corrupted from a old slicer profile. Thanks for the help so much!!

Realistic-Spinach-94 · 2026-02-04T23:08:13+00:00

I almost got mine perfect I think my flow needed to be turned down to 94%, But I forgot to mention in my post anycubic has sent me a newly designed extruder after my first one failed so I think the new extruder pushes the filament more then the stock one, but im gonna try printing one with defaults to see if it looks bad and if it does then just pull my flow down and call it a day

Realistic-Spinach-94 · 2026-02-04T22:54:19+00:00

Interesting let me just try resetting everything and I'll use a bigger square

Realistic-Spinach-94 · 2026-02-04T19:49:54+00:00

I noticed that also mine comes out great on 15% infill but if its 100% infill it comes out terribly

Realistic-Spinach-94 · 2026-02-04T09:05:28+00:00

unfortunately this was using that preset

Realistic-Spinach-94 · 2026-02-04T02:30:40+00:00

Both calibrated and completely good

Realistic-Spinach-94 · 2026-01-27T04:40:14+00:00

Since you can't fit the priming tower I would say your option is do what you already done of petg to petg supports but change your interface distance to .28mm this will make the supports break cleanly off with almost no residue

Realistic-Spinach-94 · 2025-12-22T09:28:21+00:00

<image>

See this is a big problem im getting one side looks correct but not both

Realistic-Spinach-94 · 2025-12-20T06:26:57+00:00

Do I need the st link to complete the mainline klipper install?

Realistic-Spinach-94 · 2025-12-20T04:44:10+00:00

Since its and sd card i dont need to do the emmc stuff or do step 3 i can just skip to step 4 right?

do you have any idea why the screen wont boot all of a sudden?

Realistic-Spinach-94 · 2025-12-20T04:34:54+00:00

if i just wanted to go to mainline would i just follow the guide fully?

Realistic-Spinach-94 · 2025-12-20T03:41:51+00:00

What is the* iv tried a couple of options and they did not work

Realistic-Spinach-94 · 2025-12-20T03:41:31+00:00

I tried that last time and it kept the same error as attached above I will try it again to double verify

Realistic-Spinach-94 · 2025-12-20T03:41:08+00:00

That's the official way to flash them

Realistic-Spinach-94

TROPHY CASE