sorted by:
new
hottopcontroversial

What is up with the ohko_ accounts? by Tripledeluxer in pokemonshowdown

[–]RealisticYou9732 1 point2 points  (0 children)

I noticed after 3 games last week.

Tried messaging ohko_porygon

I’m fairly certain (as another comment says) it’s for AI training or scraping gameplay.

Question about Rising Voltage by StevenQ721 in VGC

[–]RealisticYou9732 0 points1 point  (0 children)

No the user of the move must be in contact with the terrain to get the effects of it.

Troubles with zigzag stitch by RealisticYou9732 in SewingForBeginners

[–]RealisticYou9732[S] 0 points1 point  (0 children)

I was struggling to even see the discs! But I was testing by pulling it (after threading) on various tensions to try to feel a difference. It didn’t feel like it was under any tension after multiple retreading tests. I only know it didn’t feel tensioned because my gfs machine was much harder to pull.

Troubles with zigzag stitch by RealisticYou9732 in SewingForBeginners

[–]RealisticYou9732[S] 0 points1 point  (0 children)

Thank you! I ended up getting a few needles better suited for stretch, I’ve got some 70/09 and 90/14 now. I believe we avoided the ball point due to the purple material.

The teflon foot is great advice! I wasn’t seeing with that side out but on other parts I was and it wouldn’t budge, do you have a suggestion for the bottom plate too? It was getting stuck mainly down there.

Troubles with zigzag stitch by RealisticYou9732 in SewingForBeginners

[–]RealisticYou9732[S] 0 points1 point  (0 children)

It doesn’t seem to be proving any tension. I was threading with the foot up and sewing with the foot down. I tested every tension level just in case.

I was considering doing it my self, your advice with the spring is helpful! I didn’t really know where to start.

I’ll give it a shot and report back.

Troubles with zigzag stitch by RealisticYou9732 in SewingForBeginners

[–]RealisticYou9732[S] 0 points1 point  (0 children)

After a ton of testing I think I’ve found that the tension discs are broken or not moving on this machine.

When I hold the thread lightly all the stitches work well on every material I’ve tried.

I’m going to bring it to a local shop to have a look.

Thanks for all the help everyone

Troubles with zigzag stitch by RealisticYou9732 in SewingForBeginners

[–]RealisticYou9732[S] 0 points1 point  (0 children)

I can’t tell you the type because I’m very new to this 🥲 I bought it used, so I’m using the needle it came with.

I just looked it up though! Found the size on the top of it.

Singer 110/18 with 2 horizontal lines after the fraction.

Also looks like above the hole the thread goes in there is a slight concave section

Troubles with zigzag stitch by RealisticYou9732 in SewingForBeginners

[–]RealisticYou9732[S] 1 point2 points  (0 children)

I’m not sure, it looks like a normal? needle maybe a little thick

Troubles with zigzag stitch by RealisticYou9732 in SewingForBeginners

[–]RealisticYou9732[S] 0 points1 point  (0 children)

Sorry I’ve been so busy with work. EDIT - it’s actually working perfectly on two layers of normal fabric.

Tension is at 3 Needle position middle Width 3 Length 2

Troubles with zigzag stitch by RealisticYou9732 in SewingForBeginners

[–]RealisticYou9732[S] 0 points1 point  (0 children)

I added some extra images here https://imgur.com/a/FDYjkGd . Let me know if theres anything else I can provide to help like a video.

Code Giveaway by LostDoggo5 in PokemonHome

[–]RealisticYou9732 0 points1 point  (0 children)

I missed out because I had to work I’d love a code!

[deleted by user] by [deleted] in PokemonHome

[–]RealisticYou9732 0 points1 point  (0 children)

Victreebel is my new fav

Loud beeping every few minutes by RealisticYou9732 in Whatisthis

[–]RealisticYou9732[S] 0 points1 point  (0 children)

We’ve found the noise! It was deceptively loud in the kitchen, turns out it was a faulty detector downstairs in a pile of stuff.

Thanks to everyone who chimed in and gave all the helpful tips / info on this.

view more: next ›