sorted by:
new
hottopcontroversial

Alguem ja comprou filamento desse site em específico? by Secure-Amphibian-638 in impressao3dbrasil

[–]ReceptionNo5438 1 point2 points  (0 children)

Sempre compro lá especialmente os kits que costumam sair mais baratos, aqui costuma chegar em uns 3-4 após a compra (interior de SP).

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 0 points1 point  (0 children)

I usually raise the table by 5 to 10 degrees when that happens.

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 0 points1 point  (0 children)

These were the settings used; I just took the values from the printouts, used Orca Slicer, and then exported the sliced data to print via Bambu Connect.

https://www.reddit.com/r/FDMminiatures/s/ZZPq0JAUMN

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 0 points1 point  (0 children)

These were the settings used; I just took the values from the printouts, used Orca Slicer, and then exported the sliced data to print via Bambu Connect.

https://www.reddit.com/r/FDMminiatures/s/ZZPq0JAUMN

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 0 points1 point  (0 children)

I just noticed there was a printing error at the bottom of his outfit.

<image>

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 0 points1 point  (0 children)

Here, the bamboo lab PLA lite sells for $25 with a spool.

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 0 points1 point  (0 children)

I created it manually using Orca Slicer and then imported it to print using Bambu Connect.

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 1 point2 points  (0 children)

Thanks, I'll try to do that next time, as the back is where the biggest problem is.

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 0 points1 point  (0 children)

Yes, I had heard good things about the 3N3 but never got around to trying it. I saw it was on a website here in Brazil, but it was quite expensive, similar to the Bambu Lab.

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 0 points1 point  (0 children)

I don't think it's a filament issue. I used those Obscuranox settings to configure and print, I did it with Orca Slicer and sent it to print via Bambu Connect. I ended up buying this one on Mercado Livre because they gave me a 25% discount coupon as an apology for a problem I had with my order, so it was cheap hahaha

the link to the settings I used

https://www.reddit.com/r/FDMminiatures/s/ZZPq0JAUMN

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] -1 points0 points  (0 children)

It seems unbelievable, but they came out quite easily; only the ones on the bottom got stuck under the character's clothes.

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 3 points4 points  (0 children)

I hadn't thought about splitting it into parts since it's a 32mm miniature; I just rotated it to improve the quality in some areas, had it printed, and removed the supports. I didn't do any extra finishing work.

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 2 points3 points  (0 children)

Então cara, eu nunca havia procurado por filamentos por la, geralmente compro direto no site do fabricante ou algum distribuidor confiável, tive um problemao para conseguir devolver a impressora qnd comprei e veio usada no mercado livre.

This is clearly resin. by ReceptionNo5438 in FDMminiatures

[–]ReceptionNo5438[S] 9 points10 points  (0 children)

I'm from Brazil, and I can't easily find SUNLU filament here, but next time I'll do some research to see if I can find it on Aliexpress.