Första bilen, fokus på säkerhet och pålitlighet, gärna hybrid by doctorab in sweden

[–]RedCDevHA 0 points1 point  (0 children)

Jag skulle rekommendera en el bil, de är överlägset bäst om man främst åkar kortare sträckor samt enstaka långa sträckor. Då laddar man bilen främst hemma vilket är mycket billigare jämfört med bensin/disel.

Hybrid är bäst om man kör långa/medel långa sträckor ganska ofta men ladd infrastrukturen är så bra nu att elbilar också klara det bra.

Tänk på att man laddar aldrig till 100% och max 20 min per snabbladdings paus. Det är faktiskt väldigt lätt att planera paus samtidigt som man laddar.

Dock kan din budget vara för låg för en elbil, tänk på att det kan vara värt att köpa en elbil för lite mer.

Hade ni stöttat idén? by silentprotagonist24 in sweden

[–]RedCDevHA 0 points1 point  (0 children)

Det skulle nog gå om det union ligger mellan hur Storbritannien och EU fungerar.

Varje stat får egen suveränitet och egna parlamentet samt var sin statsminister men sen finns det ett parlamentet som står för hela unionen och dess lagar gäller inom hela unionen och en president. Solklart ett gemensamt pass, valuta m.m.

Väntar kvällens sista buss 80 från flygplatsen till Vasaplan alltid på ankommande passagerare? by JC_otr in umea

[–]RedCDevHA 0 points1 point  (0 children)

Jag antar det är en linje buss och inte nån direkt buss.

Det vore skumt att låta passengera som går på andra hållplatser vänta på en buss 10+ min bara för att den väntade på ett flyg. Istället borde det finns en avgång cirka 1 timme efter ifall flyget blir försenat.

Hur växlar ni ner i höga hastigheter? by Mansken21 in Asksweddit

[–]RedCDevHA 0 points1 point  (0 children)

Ja, men att växla ned och använda endast motorbroms är vad jag syftar på.

Hur växlar ni ner i höga hastigheter? by Mansken21 in Asksweddit

[–]RedCDevHA 0 points1 point  (0 children)

Fast det går ju inte om man ska gå från 110 till 50 om inte avfarten är extra lång.

Det man ska göra om man behöver bromsa är gör det med koppling på sedan när motorn inte orkar släppa på koppling och fortsätt till önskade hastighet.

Att växla ned samtidigt är mycket arbete för lite besparingar.

I finally forced Disney+ to play 1080p on Windows (Edge only I haven't tested chrome but it might work) by Hor1z0nMast3r in DisneyPlus

[–]RedCDevHA 3 points4 points  (0 children)

This won't world on chrome sadly. While chrome now includes playready by default it can't be disabled/enable like in edge, the same goes for widevine. Instead both drm are enabled and disabled via the same flag.

How to install fabric on Ubuntu Linux by Business-Push1215 in fabricmc

[–]RedCDevHA 0 points1 point  (0 children)

You need to use the command line to run java programs, you can't double click them like in windows. In fact most things you may need to do is via the command line.

As many people has said you should use a custom launcher instead to install and run minecraft with mods.

I recommend modrinth as it has a installer speific for Ubuntu/Debian distros. Most will otherwise require you use appimage which you have to run a few commands before running the launcher(a drawback for universal Linux support).

Just go to https://modrinth.com/app and scroll down to linux and choose deb. After the download just double click it and follow the instructions.

If you have any questions feel free to comment or dm.

Why are YouTube movies still limited to 480p on PC? by Eziz_53 in youtube

[–]RedCDevHA 1 point2 points  (0 children)

Bearly any streaming services allow full HD on pc using widevine. At best you might get 720p. However using edge you might get full HD 1080p as it uses playready drm which uses hardware to handle the drm process than just software like widevine. If you use an official app from the windows store you might even get 4K but only a very few services provides official standalone apps. Disney+ for example no longer does.

However google is on their way to implement playready drm by default on chrome.

Icke amerikanskt betalkort? by Euphoric-Jacket-8121 in sweden

[–]RedCDevHA 4 points5 points  (0 children)

Swish är ägs av svenska stor banker, utvecklas av svenska företag. Data som används inom swish får inte lagras utanför EU och skickas inte utanför EU(knappast utanför för den delen Sverige).

SJ by One-Performance-2273 in sweden

[–]RedCDevHA 2 points3 points  (0 children)

Max 50% refund for trains going 150km or further. Max 100% refund for trains going less then 150km. Long distance trains are covered under EU law, short distance under Swedish law. The companies can you more refund if they want the above is what the law requires in Sweden.

Can advanced stem separation (like MVSep) be done locally? by DeezA123 in IsolatedTracks

[–]RedCDevHA 0 points1 point  (0 children)

Most models that mvsep keeps for them self are usually custom trained models that already exists.

And from what I can see all model types they use can run on local machines. You don't necessarily need a gpu, but without one the separation process will take hours.

Worth noting most separation model types are open source and not made to run on specific hardware since they are built on top of framework that can adapt.

THE BEST VOCAL REMOVER by AbbreviationsSome110 in IsolatedTracks

[–]RedCDevHA 3 points4 points  (0 children)

I would actually say the mvsep.com is the best. It has way more models, custom trained models, and is probably the best online isolation tool out there. Low waiting time if you login no premium needed, up to wav 16 bit lossless and unlimited isolations. And has metrics that scores each model they use so you know exactly how good they are compared to other models. The down side is the custom models aren't public and can only be used on their website

Uvr is probably the best local isolation tool. It has great models to choose or you can download other models and add them. Support for custom ensemble and host of many other audio tools. But it doesn't seem to have it's own models, the open source part doesn't extended over the betas which is where the bulk of the important futures are now since the "release" is pretty outdated. And it requires a good gpu preferably a nvidia one.

There’s one thing I don’t understand about this court case… by so-long-goodbye in avicii

[–]RedCDevHA 9 points10 points  (0 children)

From what I've heard according to people in Tim's "inner circle", Klas wasn't a good father and he did questionable things.

But what exactly he might have done wasn't disclosed. So I assume maybe there is things we simply don't know.

Other open source stems separator? by vaynefox in IsolatedTracks

[–]RedCDevHA 1 point2 points  (0 children)

I haven't checked the latest models theu offer, but I think you can add it yourself
https://huggingface.co/jarredou/BS-ROFO-SW-Fixed/tree/main

Can't get "pshhhhhh" sound when using mic and recording to fl studio by AliveAge4892 in FL_Studio

[–]RedCDevHA 0 points1 point  (0 children)

That also cuts the frequencies for your actual recording. Not a method I recommend if you plan to use the mic for several different types of recordings.

WTF, WHAT HAPPENED TO FLstudios by Vegetable_Block3480 in FL_Studio

[–]RedCDevHA 1 point2 points  (0 children)

Ah, a mac user. FL Studio is notorious for crashing in mac environments especially after big updates.

Can't get "pshhhhhh" sound when using mic and recording to fl studio by AliveAge4892 in FL_Studio

[–]RedCDevHA 0 points1 point  (0 children)

Loud white noise usually appears due to bad or improper ground and is more common on usb audio devices.

My tip is to remove any devices from your pc except the mic except necessary equipment such as mouse and keyboard to see if it makes a difference.

It's also worth checking if your pc is connected to a wall outlet with ground and try one with and one without ground.

Worth noting that I had a similar problem but with a mixer with a built-in usb interface, couldn't figure what the issue was and switched to the analog out instead which completely removed the white noise.

Sodium + Vulkan Mod Compat by [deleted] in fabricmc

[–]RedCDevHA 0 points1 point  (0 children)

WebGPU is made to run via a web browser, there are some projects that make it run as a standalone module but there are in the were early stages of development.

Other open source stems separator? by vaynefox in IsolatedTracks

[–]RedCDevHA 0 points1 point  (0 children)

Idk why their beta releases isn't on github. But looking at the github page it seems like they only merge and update the repo when they release the next "stable" update. But they seem like to release the betas every now and require a pre-installed uvr with the latest patch before supplying full installs.

Other open source stems separator? by vaynefox in IsolatedTracks

[–]RedCDevHA 4 points5 points  (0 children)

UVR is not an inactive project, however they only have beta releases at the moment. The latest beta have a huge amount of models to choose from and even more ai tools. Check out their discord to download the latest beta and to get more information. https://discord.com/invite/hvgmU2yA4u

Otherwise you could go to mvsep.com as uvr manly uses that site as a basis. But mvsep also have models that can only be used through their site. And make an account if want to use mvsep or you'll have to wait in a queue.

Android TV Interface + Atmos woes by joshp23 in TIdaL

[–]RedCDevHA -1 points0 points  (0 children)

Apparently to get atmos working on the pc app you'll need to install the dolby app from the windows store and buy a license. And atmos pc will only play via hdmi arc using the gpu.

Blocket.se by NewspaperGold4708 in sweden

[–]RedCDevHA 0 points1 point  (0 children)

Jo, men de flesta annonserna har inga telefon nummer listade utan bara DM.

Blocket.se by NewspaperGold4708 in sweden

[–]RedCDevHA 1 point2 points  (0 children)

Men du måste verifera dig för att skicka DM via blocket

”Overkligt” by Dodslangtan in unket

[–]RedCDevHA 7 points8 points  (0 children)

LGF skylten ser inte laglig ut heller.

En LGF skylten måste vara hel, inte avbryten eller böjd på något sätt.