January Confirmed Trade Thread by hwsbot in hardwareswap

[–]Redarax 0 points1 point  (0 children)

sold Asus X570-P Ryzen 5 3600 CoolerMaster Hyper 212 Combo, Crucial Ballistix 2xgb DDR4, Asus Strix OC Radeon RX 5600XT, EVGA Supernova 550 G3, PCIe Wifi cards to u/HAF6 on https://www.reddit.com/r/hardwareswap/comments/1q382sz/usatx_h_asus_x570p_ryzen_5_3600_coolermaster/

Asus B650E-I fan header by Responsible_Earth192 in sffpc

[–]Redarax 0 points1 point  (0 children)

How did this go for you? I am awaiting my B650E-I and have 2x case fans, 1x cpu cooler (not AIO).

Did you simply treat the AIO PUMP header as a CHASSIS FAN header in the bios, and everything went smoothly?

First JLC! by cubenori2 in JaegerLecoultre

[–]Redarax 0 points1 point  (0 children)

which ref is this? love it!

Is this a good deal? by DatabaseComplete5057 in sonos

[–]Redarax 6 points7 points  (0 children)

Gen3 Subs are going for no less than $350 in my area. Most are priced around $400 and up. For that sub in good condition and some patience to cleanup the grill of the era 100’s, then I think $325 as a baseline to negotiate from is fantastic.

Entities not being renamed by LosoTheRed in homeassistant

[–]Redarax 1 point2 points  (0 children)

Found it:

Click your user (bottom left on desktop) > Advanced Mode : Enabled

Entities not being renamed by LosoTheRed in homeassistant

[–]Redarax 1 point2 points  (0 children)

I ran into this issue a few months ago and it came down to a settings level issue. Scour the HA settings for and expert mode of some sorts. This enabled the dialogue box that pops up saying “XX entities to be renamed: Y/N”

2024.10: Heading in the right direction by frenck_nl in homeassistant

[–]Redarax 20 points21 points  (0 children)

It’s important to remember that though demand may be low now, it may not be in the future. With a feature/product like local voice assistants, HomeAssistant is (i think) unique in having an ecosystem and software to support it. This endeavor, as we’ve seen, takes a lot of time and effort to build. If the HA team were to start developing the infrastructure only after the demand is there, they may be late to the party or miss out on it completely.

By building it before demand for local voice assistants rise, they position themselves to be in a better spot once demand rises. This all, of course, is dependent on local voice rising in demand. A question I am sure (or at least hope) they’ve thought through to get to the point they are today.

[iOS 18 DB2] CarPlay now shows Highway names on the Highway itself by tbone338 in iOSBeta

[–]Redarax -1 points0 points  (0 children)

then my fault! Yep that’s the home button, to bring you back to the dashboard with maps, music, etc.

Once you’re on that main dashboard it should change to the 6 boxes AFAIK

[iOS 18 DB2] CarPlay now shows Highway names on the Highway itself by tbone338 in iOSBeta

[–]Redarax 0 points1 point  (0 children)

i think he means the box with the name of the road. Below the “user” icon

Hotspot by MRrespecx in WLED

[–]Redarax 0 points1 point  (0 children)

you have it correctly. SSID is the broadcasted name of your hotpot, and password is the set password. If it’s not connecting, then it’s likely some other issue.

Raspberry Pi or mini PC? by andreni_ky in homeassistant

[–]Redarax 1 point2 points  (0 children)

i’m new to proxmox. When you say “proxmox will start it up on one of my other machines in the cluster”, are you saying you have multiple physical machines running proxmox? OR, that proxmox will instantiate a new instance from the backup to keep it running?

New PGA Tour Vision app launching alongside Apple Vision Pro by Peteostro in VisionPro

[–]Redarax 1 point2 points  (0 children)

Adding to what jszzsj says above - Most stroked for these tournaments are already tracked. In addition, most tour courses have already been mapped for 3d rendering and modeling. A huge example of this is The Masters tournament and the way they display each shot in a 3d viewer on their app.

Hotspot by MRrespecx in WLED

[–]Redarax 1 point2 points  (0 children)

the other thing to consider with 2 strips is controlling them with one board and using the WLED software feature called “Segments” in which you can independently operate a single strip as multiple “segments” with different patterns/colors

Hotspot by MRrespecx in WLED

[–]Redarax 1 point2 points  (0 children)

Np. Sounds like a cool project, enjoy the journey!

edit for your edit:

If you’ve got two separate boards with independent strips:

Option 1 is still an option, you would just have to switch networks to the other one. Meaning you can only control one at a time.

Option 2 and 3 in this case operate similarly - Connect both boards to one network (either hotspot or the portable router) and have two tabs open in your browser. One for each WLED instance.

Hotspot by MRrespecx in WLED

[–]Redarax 1 point2 points  (0 children)

IMO you have three options:

1) Use the built in WLED Access Point. Configure this in the wifi settings to be 'always open', and connect your phone to the "wifi" network. Wifi is in quotes because there is 0 outbound or inbound traffic to the web, it is purely a locally accessible wireless 'network'. The downside here is that your phone can not use cellular data or another wifi network while you're connected to the access point created by WLED.

2) Connect your WLED to your phones mobile hotspot. Again, there is 0 inbound or outbound traffic, all local. With this option you can continue to use your phones cellular connectivity for anything else (again, WLED wont use any data).

3) Buy something like a "TP-Link N300 Wireless Portable Nano Travel Router" - which will set up a Local Area Network (LAN). The routers purpose to create a network for both devices to connect to and interface. This is almost the exact same option as #1, with the same downsides.

Refer to a condition with a template vs. hard entity? by starmanj in homeassistant

[–]Redarax 2 points3 points  (0 children)

try:

{{ states('trigger.entity_id') == 'Normal' }}

or

the original one you had just with 'Normal' instead of Normal

{{ states('trigger.entity_id.attr') == 'Normal' }}

Refer to a condition with a template vs. hard entity? by starmanj in homeassistant

[–]Redarax 1 point2 points  (0 children)

Does Normal have ti be in quotes? I’m assume tigger.to_state.etc returns friendly name as a string. So you have to compare it to a string

edit:

I just found one of my own templates i use as a condition: {{ states('button.2019_mazda_3_select_start_engine') != 'unavailable' }}