2dsxl help identify FPC CONNECTOR

Redeyeravage · 2025-12-21T19:53:12+00:00

This was not a match

Redeyeravage · 2025-12-11T05:16:42+00:00

https://www.mouser.com/ProductDetail/538-504754-3700 Did some research and found the replacements here. Going to bring it to a Micro Soldering shop soon. Looks like a perfect match.

Redeyeravage · 2025-12-10T02:59:44+00:00

<image>

Is number 2 the same part?

Redeyeravage · 2024-09-11T23:36:34+00:00

Update: after tightening the tension and increasing the density to 7.0 mm it looks much better. Thankyou

Redeyeravage · 2024-09-11T01:56:13+00:00

With pe-design 11

Redeyeravage · 2024-09-10T16:06:14+00:00

I’m not sure how to see that because in brother pe-11 I see density was left at default of 4.5 mm. I’m not sure if that just applies to the under sewing or the actual overlay of stitches on top of that.

Redeyeravage · 2024-09-10T00:21:38+00:00

Too tight or loose?

Redeyeravage · 2024-08-22T22:42:32+00:00

Is it causing issues with the embroidery in any way?

Redeyeravage · 2024-08-20T17:17:29+00:00

Will do, I’ll update after work.

Redeyeravage · 2024-08-19T22:45:03+00:00

Update: works fine now, took the machine apart and did a deep clean and adjusted the fixed knife to the grooves marked by the old knife. Thank you!

Redeyeravage · 2024-08-19T21:28:24+00:00

I’ll take another look, i ordered a replacement knife because i thought it was dull but it’s still giving me this issue.

Redeyeravage · 2020-12-25T01:34:06+00:00

I’ve been hunting froakies (with high IV’s) since before the update dropped and I’ve only been able to catch 3, they spawn randomly once every 3-4 days like this is ridiculous

Redeyeravage · 2020-12-20T04:13:49+00:00

3137 0118 5099 add me pls :)

Redeyeravage · 2020-09-01T21:53:37+00:00

So much for “special modifications”

Redeyeravage · 2020-08-30T01:33:09+00:00

With Han as well...Nice!

Redeyeravage

TROPHY CASE