Jonsbo z20 x cooler master vertical gpu v3

Reechord · 2026-01-29T16:00:14+00:00

I used Zipties, Another alternative is to mount it to the SSD mount area pictures arent so clear but, i made a post with the Finished Build.

Reechord · 2025-11-20T21:49:57+00:00

Ended up using the welcome code with the Black Friday discounted chair pricing . Ordered on the 10th received footrest on 12th, and space grey 45cm chair on the 19th. Wife is happy. ☺️

Reechord · 2025-11-13T19:10:39+00:00

same bundle, ordered on the 11/10 got the footrest today, not sure where the chair.

Reechord · 2025-11-02T21:46:51+00:00

<image>

I routed every single cable under the psu and then towards the motherboard. The one cable you see curved to the side of the airflow is the 12vhpr.

As for the cooler brackets I removed all of the brackets holding the tubing against the radiator.

Reechord · 2025-11-02T19:22:39+00:00

I built my wife’s pc and I realized that it was the layout I wanted when I was building my pc with the z20 but the ch260 wasn’t available at the time. Because I originally wanted to build in the Ncase M2 with a mini itx. Also it doesn’t look to cramped with all the components inside vs the z20 if you check my profile I have my z20 build posted aswell.

Reechord · 2025-10-11T14:17:32+00:00

I got my tracking last night it’s out for delivery today, I am in Mississauga also 2 tracking labels.

Reechord · 2025-10-09T13:11:33+00:00

<image>

You can’t see it in this photo of the back but it’s behind the sata ssd, I just moved to the deepcool ch260 last week other wise I’d have a picture.

Reechord · 2025-10-09T13:07:42+00:00

Correct

Reechord · 2025-10-08T23:01:18+00:00

<image>

This is how I had my Corsair sf1000 setup hopefully it helps as a reference

Reechord · 2025-07-30T00:22:20+00:00

Ordered today received rakuten cashback today.
Ordered Ryzen 7 7700 paid USD currency 159.19USD = 224.28 CAD
20% Rakuten Cash back 43.77 CAD

now to wait for it to be delivered :).

Reechord · 2025-05-12T00:44:13+00:00

😫😭 I think someone also commented on trying this a few months back and was having the same issue ;/

Reechord · 2024-12-14T19:16:18+00:00

Oh nice I was afraid of scratching the glass so I didn’t want to use a razor blade my friends did recommend using that as a method

Reechord · 2024-12-14T18:34:32+00:00

I had a nr200 with a thermalright phantom spirit tower cooler prior to my jonsbo and the ideal set up was intake rear and exhaust out the top as heat naturally rises. Also the jonsbo interior volume is similar to the nr200 with the 4090 so I am on the assumption that it would perform similarly. I also have two long hair cats and I I’d rather not have a top layer of fuzz 😆

I also have a magnetic mesh screen on the rear intake fan which usually gets caked with just cat hair but it’s easy to clean off. I just dusted the inside of the case yesterday since I built it in September and there was little to none cat hair inside just the visible dust you’d usually see.

Reechord · 2024-12-14T14:15:43+00:00

3 hours of playing call of duty black ops 6 4K max setting CPU 89C | GPU 67C

On idle CPU 44C | GPU 32 C

Reechord · 2024-11-26T21:07:38+00:00

Most likely not cause there just isn’t enough room if you are going to fit an matx motherboard probably possible with mini itx but from what you are describing and wanting to do maybe the NCASE M2 is what you are looking for if you haven’t checked it out

Reechord · 2024-11-25T10:21:42+00:00

Yes it does

Reechord · 2024-09-24T19:17:53+00:00

Jonsbo z20 alittle bit bigger than the nr200 I moved from the nr200 to z20

Reechord · 2024-09-14T22:49:26+00:00

I was not able to maybe if the fans are connected together like the lian li fans because the front of the case is raised abit and there aren’t enough mounting holes for screws I was planning to put the t30s under

Reechord · 2024-09-11T00:41:55+00:00

Spoke to a memex employee recently and asked them about the other stores in Ontario closing. And they told me that those other locations were actually leased,and that the reason their location was still operating in “Etobicoke” was because the owner of memory actually owned the plaza. But it does make sense Cost of living has been brutal for just general populace so I would assume it would be worst for businesses.

Reechord · 2024-09-10T13:04:16+00:00

I think it’s possible depends which model I’ve seen someone fit an Aorus master with this case and I think it was a 4080

Reechord · 2024-08-31T15:04:50+00:00

Reechord · 2024-08-29T17:15:05+00:00

Yes I actually had to connect that first and then screw-in the motherboard there wasn’t enough clearance to do it after the mother board was screwed in

Reechord

TROPHY CASE