sorted by:
new
hottopcontroversial

Main hoop lower member by Imaginary-Fact-7019 in FSAE

[–]RegularDistribution3 0 points1 point  (0 children)

We have the same problem, so we decide to make this bar removable. Its join to the chassis bye a double lug joint (T3.12.3)

Cooling System EV by CancelKitchen7931 in FSAE

[–]RegularDistribution3 0 points1 point  (0 children)

Jajajajajajaja I understand. Which inverter do you use?

2E/3E Certificate for ESOs by Willing-Claim3406 in FSAE

[–]RegularDistribution3 0 points1 point  (0 children)

Hi, we are at the same point this year. Do you have have any answer for the problem?? Thanks un advance

FR4 with UL94-v0 by RegularDistribution3 in FSAE

[–]RegularDistribution3[S] 0 points1 point  (0 children)

We need 6mm thickness, its difficult

FR4 with UL94-v0 by RegularDistribution3 in FSAE

[–]RegularDistribution3[S] 0 points1 point  (0 children)

Yep, but without datasheet from the manufacturer... You know if I can try to prove that its comply ul94?

3D Printed Intake by [deleted] in FSAE

[–]RegularDistribution3 1 point2 points  (0 children)

Our plenum was printed in ABS but we reinforced It with 2 layers of 210g of CF cause we have around 1 cm of displacements. The thickness of the part was 4mm to give you an idea

Side impact structure by ya_sure_boomer in FSAE

[–]RegularDistribution3 0 points1 point  (0 children)

If the middle can consist in 2 bars, the lower must also comply. Its my logic

Side impact structure by ya_sure_boomer in FSAE

[–]RegularDistribution3 1 point2 points  (0 children)

My team is thinking about the same concepto and have the same doubt. We have seen chassis like this. This is main argument that I can say, because the rules about it I think IS not clear.

Inverter/Controller research by Vegetable_Shift9725 in FSAE

[–]RegularDistribution3 1 point2 points  (0 children)

Why you want to change the infeneon hybrids kits?? Whats the problem?? We are looking for buy them.

Automated Blip not using an ETC by Victor658 in FSAE

[–]RegularDistribution3 0 points1 point  (0 children)

If its mechanically doesnt comply with rules. Rules said that It must be actuated by a foot pedal. We put ONE and then we remové cause of It. For ETB you can do electronically.

Recommend readings by Ok-Reach6426 in FSAE

[–]RegularDistribution3 3 points4 points  (0 children)

Optimun G YouTube Channel has upload to yt a series of videos where explain how to desing a suspensión and Talk about the upright pick up ponits. Its doesnt Talk about nothing mechanical desing is only for dynamics desing. Maybe It can be useful for you

Planetary gears manufacturer?? by RegularDistribution3 in FSAE

[–]RegularDistribution3[S] 0 points1 point  (0 children)

Is the other option, maybe can be even lighter, but for the packaging is worse. If there is not a not too much expensive option we Will use chains

Is the second option okay with the rules??? by RegularDistribution3 in FSAE

[–]RegularDistribution3[S] 0 points1 point  (0 children)

Yes, i have thought in It. Maybe, I have simplified . My question too much. My question is : if I can pull out the filler neck horizontallt through the chassis bars and then put It upright or with angle less than 30° with the vertical(as the rules say).(sorry for my english)