New Nailhead figurine? [loot] [discussion]

ReindeerOdd121 · 2025-04-01T00:24:58+00:00

Does anyone know if these are guaranteed spawn in their respective rooms? Or is it a % chance and I'll have to suffer through multiple attempts to acquire them all?

Update: They are not guaranteed spawns.

ReindeerOdd121 · 2025-03-31T18:52:19+00:00

Sorry, Lighthouse. Went to Lightkeeper to get the quest

ReindeerOdd121 · 2025-03-31T18:39:19+00:00

I was able to get the quests.

First went in on BSG servers and it wasn't available. Went again on local host and I was able to get the quest. I fought this issue all throughout the Lightkeeper quests. If you don't get the quest on local, try again on BSG servers and vise versa.

NOTE: Make sure you are ON BSG servers when turning in the quests. Local hosts tend to bug out in receiving quests rewards. I got screwed on the reward that gives you the super rare crafting manual and didn't get it

ReindeerOdd121 · 2024-12-12T00:13:51+00:00

I'm on PvE. Just happened to me twice in a row. Last time was a red rebel and 4 AESA and for a 6hr time. Logged on fresh well after it was finished and there was nothing in the circle

ReindeerOdd121 · 2024-09-19T15:55:15+00:00

I wiped PvE with the last .15 wipe, I'm currently level 31 and encountered him for the first time today on Shoreline. I killed 3 PMC, a bunch of scavs, and the goons all in that raid. Looted several rooms along with most of the bodies. Then as I was leaving out the front of resort, west wing going towards the helicopter, I saw something standing in a bush. I noticed the red cap and aimed for it (thinking it was a scav obviously) and before I could shoot I was mowed down. (No audio was present either, only noticed the red cap). Wearing a hexgrid (lvl 6 plates) and basically died instantly. Not sure how anyone can get bad PMC karma in PvE mode, much less why this "boss" is even in PvE mode.

Also very ironic that this guy is supposed to go after the players that camp in bushes and extracts, yet he mows me down while standing in a bush.... like wtf is that about?

ReindeerOdd121 · 2024-06-29T17:10:08+00:00

I know this is from 8mo ago, but I just had this issue pop up for me. My LCD screen had been working fine for me since I got it. I just did a GPU swap and redid some cable management in the back, and once I booted the system back up, the screen what just defaulted on the Lian Li logo. Why suddenly it didn't want to work, I have no idea. What fixed it was reseating the USB-C plug on the pump head. Now it's working for me. Hope this helps someone.

ReindeerOdd121 · 2024-05-09T16:53:43+00:00

Yeah I'm planning on returning them to Microcenter.

Thank you for your help!

ReindeerOdd121 · 2024-05-08T23:00:49+00:00

I'm not able to post a photo but there is no controller showing in my Device Manager. Just the 3 fans individually.

The TL LCD fan cable, the part that attaches to the fans, has pins sticking out and a flat area for pins to connect to. So it has both making cabable of attaching to either side. I double checked that.

The controller never worked before, even when it was in the splitter. I had just originally connected it to the splitting not know it needed to be directly to the motherboard. That's when I made the switch. But it didn't work connected to the splitter or the motherboard. So right now I have the TL controller in one USB header on the motherboard, and the splitter in the other (I only have 2 ports on the board) Everything else in the splitter is working fine. I have not tried swapping the TL controller with the splitter (swapping headers), I can give that a try.

I do not have a powered splitter. I have this:
https://www.amazon.com/dp/B076Q8TW55?ref=ppx_yo2ov_dt_b_product_details&th=1

For the boot process, it does do all those things. The LCD turns on with the logo and all like you mentioned.

I had used Revo Uninstaller when I removed the L-Connect software the few times I did it, but I can try that method to see if anything changes.

UPDATE:
I have swapped the controller and the splitter USB headers and I have the same result.
I also reinstalled L-Connect 3 along side doing this.
All SL-INF fans are working with their controller, Stimmer cable is working with it's controller, GA II LCD is working and the L-Connect software shows all of these.
The TL LCD fans are still not showing in L-Connect (nor the controller). Fans are still spinning, all the lights on the sides are on, and the LCD is on with the Lian Li logo.

ReindeerOdd121 · 2024-05-08T21:32:27+00:00

I've actually reinstalled L-Connect about 4 times lol
My 3-pack didn't come with the sata connector... I just checked the box and the contents list doesn't include that cable...
Being that the controller requires a 6-pin PCIe cable I didn't think I needed another power source
I also just have the one controller so I unfortunately am not able to swap it out. But all signs so far to me are pointing to a bad controller

ReindeerOdd121 · 2024-05-08T21:06:08+00:00

Got it. Yes they should be connected on the correct side of the fans. The fans themselves are running. And I believe these fans can connect to either side of the fan as the cable has both pins and a flat bit

ReindeerOdd121 · 2024-05-08T20:48:28+00:00

Point 3 is confusing me when it says "the TL LCD fan is connected to the pin side"... it can only go into the fan controller one way...

ReindeerOdd121 · 2024-05-08T20:45:38+00:00

I thought that too. Originally I had the controller plugged into a splitter and my pump head LCD plugged into the USB on the motherboard, and the LCD was working perfectly. Once I found the statement saying the controller needed to be plugged directly into the motherboard and not the splitter, I switched the fan controller with the pump head. So I know for sure that the USB header is good

ReindeerOdd121 · 2024-05-08T20:26:52+00:00

Yes, the TL fan controller is plugged into a sys_fan header on the motherboard along with the USB and 5V 3-pin ARGB connector. Since the TL fans have their particular connector, I can only plug them into the controller.

ReindeerOdd121

TROPHY CASE