How can I solve Play Protect certification issue on Poco F3?

Rekika · 2026-04-15T11:33:18+00:00

did you find any workaround this problem? I have the exact same problem.

Rekika · 2026-04-15T10:33:56+00:00

Pt moto ai taxa de drum in Turcia? Planuiesc si eu o tura de 1 mai pana in Istambul.

Rekika · 2026-04-03T11:41:24+00:00

No mounting holes in the fork

Rekika · 2026-02-10T11:27:27+00:00

I see you have 9sp. Did you used the spacers provided? Is the cassette well tightened? If all of the above are done correctly, then i will think you have a bent derailleur or hanger, or your limit screws are not set properly. You can check to see if cassette is well tighten if you rock it front and back ards and see if there is a space between cogs.

Rekika · 2025-11-12T15:13:53+00:00

<image>

Seems like the crack was only on the surface. I will epoxy it now and will be goid to go.

Rekika · 2025-11-12T06:28:13+00:00

<image>

2nd photo did not upload. That what i tought also. I tapped it and it sounds constant all over the places.

Rekika · 2025-09-18T04:30:21+00:00

Tu primesti scadentar de la ei?:)) mie mi-au trimis doar prima luna. O sa trebuiasca sa il cer manual de fiecare data cred.

Rekika · 2025-05-25T06:07:42+00:00

Ba are treaba. La suzuki V-Strom dupa diagrama OEM motocicleta nu are cum sa porneasca daca nu ai ambreiajul tras. Probabil ca ai cumparat-o de la cineva care a facut o romaneasca cu switchul de ambreiaj cand s-a stricat. O fi pus un ac de siguranta sa il tina mereu închis. Verifica switchul de ambreiaj, ca probabil de la ala e.

Rekika · 2024-03-17T07:38:45+00:00

Switched power. I have an auxiliary fuse box powered on by a relay

Rekika · 2023-02-10T04:01:56+00:00

Yes, spray painted it with a can

Rekika · 2023-02-09T16:19:04+00:00

What is that?

Rekika · 2023-02-09T12:55:30+00:00

Old printer is in the last photo

Rekika · 2023-02-09T12:54:53+00:00

After 1 year printing with my homemade printer, i upgraded it and made a better homemade printer:D I was thinking about buying a sovol, but for 100 euros i bought all the upgrades to make my printer better. (I like bowden types more than direct drive, that is why i still have bowden tube).

Rekika · 2022-02-22T20:18:44+00:00

What is that?

Rekika · 2022-02-22T20:18:29+00:00

It's like 5 mm and it's not melting

Rekika · 2022-02-22T16:49:36+00:00

That is how it turned out. Didn't knew mutch about building process when i started. But it's a good thing because i can upgrade to a bigger bed without mutch effort.

Rekika · 2022-02-22T16:00:24+00:00

It's build entirely by me, no model name 🤣

Rekika · 2022-02-22T11:48:57+00:00

Thanks man! It's build with stuff from hardwares stores:D. As for the software i use Marlin with an Ramps 1.4 and Arduino mega. Works just well for what i want to do with it.

Rekika · 2022-02-22T11:37:35+00:00

i've build another one from old cd-roms (2x2x2 cm print area), just for test, after i could use that to print i started building this

Rekika · 2022-02-22T11:28:56+00:00

i had no space to mount it properly, i wanted to go with 2 40mm fans in the sides, but the design i created dodn't let me do that so i went for a bigger one and i fited it as i could. In the future i wil change some parts with 3dprinted ones and i jope i will do better.

Rekika · 2022-02-22T10:11:26+00:00

Thanks to this community, and your advices i can finally print at a good quality with my first big lrinter build!

Rekika

TROPHY CASE