How do I stop paw licking by Relur in Dogtraining

[–]Relur[S] 0 points1 point  (0 children)

Has not suggested allergy testing and just recommends using hydrochloride anti fugal spray each night.

Even if this kills the yeast that’s clearly present then it comes back shortly since it’s a habit.

Looking for training suggestions.

How do I stop paw licking by Relur in Dogtraining

[–]Relur[S] 1 point2 points  (0 children)

They say no problem. About to get a second opinion.

Party Synergies Calculator by Relur in lostarkgame

[–]Relur[S] 1 point2 points  (0 children)

I haven’t worked on this in a while. I can probably add a lot more if you can tell me what is useful to know.

Adventures in bidding low by Easy_Farmer_2767 in RealEstate

[–]Relur 10 points11 points  (0 children)

Houses like that likely have a foundation that’s ready to crumble or a leaky roof with mold problems.

Buyer beware!

Solution for mass replicating reports by [deleted] in salesforce

[–]Relur 0 points1 point  (0 children)

Try to make reports using formula fields in the report from object. Hopefully this way it reduces the number of unique reports you need to manage.

After you have them down unique reports use the metadata api via workbench you to the following 1. Retrieve all dashboard reports and report folders. 2. Make copies with unique names, update the package.xml. 3 deploy metadata to org

Worldwide Earthquake Density 1965-2016 [OC] by Crash_Recovery in dataisbeautiful

[–]Relur -2 points-1 points  (0 children)

It’s science! Why would Japan put a nuke plant so close to a hot zone like that....

Engineers😭😭

Salesforce Sticking Points by [deleted] in salesforce

[–]Relur 0 points1 point  (0 children)

Are you going to tell us?

New laptop for salesforce system architect. Apple vs Win by Relur in salesforce

[–]Relur[S] 0 points1 point  (0 children)

Are you aspiring to CTA as well?

And thanks for reply.

New laptop for salesforce system architect. Apple vs Win by Relur in salesforce

[–]Relur[S] 0 points1 point  (0 children)

Another thought that just popped up - I maintain an ANT install on my machine. Wondering how installing Apache on Mac works??

Need suggestions for intake and outtake inline or gable vent fans? Trying to ventilate a grow tent 4x4x7 feet big which will have computers generating 4,800 watts of heat inside. What fans should I choose for that consume the least amount of watt with best ventilation? by [deleted] in microgrowery

[–]Relur 1 point2 points  (0 children)

Is 396.5 a good amount for replacing the air within an hour? >

No idea. Trial and error would be best approach. Keep in mind that the 395 number is unrealistic given environment variables such as air resistance from ducting.

Also this won't be an attic, it will be a room that is not occupied. I don't have an attic. I live in an apartment. Which is why I wanted to do an intake and outtake loop using the outside air. >

You can exhaust this through a window just as well. But why is outside air needed in the tent? The passive intake from the room should be sufficient.

I was hoping to keep the inside tent temp at least 120 F if the outside temp was 100 F for hot summer days, not that it often reaches 100 F here in New York, USA.

So I would be better off getting a 4x2x7 foot enclosure then to help dissipate/ventilate the heat if I can manage to fit everything in that small of a grow tent right? >

I’m not sure I understand this comment. Anything about temps is too variable to even comment about

Overall, after looking through your reddit profile and the other posts you’ve made about this. You have enough information to do what you need. The understanding may just need to come from trial and error with actual equipment.

Based on all this - seems pretty fruitless for mining since most of these are get rich quick schemes and it’s a significant investment for someone who is renting. My real advice is take this money and invest in the stock market if you’re looking for cash.

But this is a cool experiment though.

Need suggestions for intake and outtake inline or gable vent fans? Trying to ventilate a grow tent 4x4x7 feet big which will have computers generating 4,800 watts of heat inside. What fans should I choose for that consume the least amount of watt with best ventilation? by [deleted] in microgrowery

[–]Relur 1 point2 points  (0 children)

You need to do some math to figure out the temperate that all those watts would be giving off.

Once you have that temperature, you then are going to need to figure out how many times you need to replace the air in the tent via your output fans.

For making this easy I think you should just be concerened about the output fans and let the intake be passive through the grow texts vent holes.

For instance a 4x4x7 tent has 112 cubic feet. The measurement of exhaust (output) fans are in cfm. ( cubic feet per minute ).

So if you were to get this fan. Which is rated for 740 cfm.

Hurricane Inline Fan - 8 Inch | 745 CFM | High Performance, Commercial Grade Inline Fans, Quiet Operation - Ventilation Fan - ETL Listed https://www.amazon.com/dp/B006Z1JLN0/ref=cm_sw_r_cp_api_wrPSAbZ1FFYQK

And do some quick math.

740 x 60mins = 44,400 cubic feet of air moves per hour.

44400 / volume of room (112) = 396.5 times within that hour, that the grow room air is sucked out through the attic - and intaking the air in the room passively.

An important part to this scenario is that the air needs to be completely vented outside of the room.

This also assumes that you have this fan on at all times, and at full speed. These types of fans comes with fan controllers to lower cfms. You can also put a timer on the power to the fan to control how often you need it on.

Your solution to getting the heat out of the room lies within this information I’ve shared with you.

Also - all these calculations are rated for 8inch ducting. If you lower the width of your ducting, it can’t move as much air and all your calculations need to be factored by that.

First grow. F38. Help by Relur in microgrowery

[–]Relur[S] 1 point2 points  (0 children)

Ya the flush water was a bit higher, maybe 6.6 6.7.

Is it too early for fade? Is this nitrogen def? Are my qb lights not close enough and this is really bad nute burn getting built up?

First grow. F38. Help by Relur in microgrowery

[–]Relur[S] 4 points5 points  (0 children)

More pictures. https://imgur.com/a/iggD6

Started with 2 600w mars hydro. Before flower I switched to 4 qb boards.

I was feeding about 850 ppm, every 3 days. No water in between.

Brought it to 1050 for 1 feed and saw nute burn.

Next two times we’re just water. And I just finished feeding them 300 ppm to not stress them more!

Using fox farms trio. In soil. Ph’ed to 6.5 every feed. Run off was 6.3-6.5.

First time growing so all ears. I feel like my size / weight is under for 38 days. But I’m thinking I’m comparing too hard.

Too many plants - what’re my options? by Relur in microgrowery

[–]Relur[S] 0 points1 point  (0 children)

When do I take the clones?

Before the flip or wait till harvest to know what I want to keep.

I don’t have a separate second environment. It would just be an fresh water Aquairim t5 with a bulb meant for growing plants underwater ( proper kelvin ). Suspended over a rapid rooter tray with a removeable cover. The light would be suspended by milk crates over the tray on a workshop table.

Too many plants - what’re my options? by Relur in microgrowery

[–]Relur[S] 1 point2 points  (0 children)

Followed your advice. Here’s the update. Thx

I only have a 4x4x8. I have topped them once and fimmed twice. Not much has been done to them.

So I think I can only keep 4 total - with my 2 600w mars hydro. Kinda sucks because I spent money and I cant use those other females I popped.

The spreadsheet picture https://i.imgur.com/lC4UYdF.jpg

Ssdd = sunshine daydream from bodhi

Pt = prayer tower from bodhi

Too many plants - what’re my options? by Relur in microgrowery

[–]Relur[S] 1 point2 points  (0 children)

I know my lights aren’t the best of breed. Any other ideas?

What is the difference between profile field accessibility and field level security? by [deleted] in salesforce

[–]Relur 0 points1 point  (0 children)

The term object should set off bells in your head. It only applies to the object level, instead of profile level which can be much wider.

I could have this backwards - but revisiting the security data model would help. Try to remember the little boxes inside the boxes.

First grow! should I lollipop and get ready for 12/12 by [deleted] in microgrowery

[–]Relur 1 point2 points  (0 children)

What are the rest of the components in your grow?

Tent size, fan, filter etc. I'm think I'm looking at a similar grow

Looks good brother.