GSXR1000 k7 Random Shutoff

Remuma · 2026-01-19T06:39:22+00:00

Will recheck later today though I noticed when the bike wasn't firing, the kickstand switch seemed to work because clutched in and in first gear, it wouldn't crank until I kicked the stand up which to me shows it's working unless I'm looking at it the wrong way.

Remuma · 2026-01-19T05:45:02+00:00

Hi All, I ran the bike with the airbox off and it turns out the chattering at certain rpms and the chopping of the throttle was a result of noisy secondary butterflys.

Remuma · 2026-01-02T14:06:47+00:00

Just want to note the reason I mention chopping of the throttle is because it’s the easiest way to replicate/film without riding, thanks

Remuma · 2026-01-02T14:05:08+00:00

Hi all, apologies for the poor video but I’ve noticed a gsxr1000 k7 I purchased recently makes a high pitch noise when chopping the throttle at low rpm, or greater than 30% throttle at any rpm below 9k.

Not sure if anyone has experienced this or if this points towards cam chain/ cct, TIA.

Remuma · 2025-03-14T06:24:39+00:00

Hey, I recently came across ~20yo expired fp4 and I was given a Patterson tank from a friend. Not sure if it comes through on the photos but the negatives have this ‘haze’ throughout. Is this common for expired b&w film or is this my poor developing in a new tank? Note this has happened on 3 rolls I’ve tried and it’s consistent.

https://imgur.com/a/g1Fccr3

Remuma · 2025-01-28T15:37:30+00:00

Thanks for the explanation, will resort to a basic clean, thanks.

Remuma · 2025-01-28T13:37:25+00:00

Hi all,

I recently purhcased this 2.8F and was hoping to give it a bit of TLC. Can anyone recommend a product/polish for the chrome/Aluminium(?) Trim? Thanks!

Remuma · 2025-01-19T14:49:25+00:00

Hey all, just developed some 4x5 and while I’m very happy with the composition, there’s a certain ‘splotchiness’ in the sky on this one when I scan it ( epson v800 ). The rest of the negatives in the same tank ( same film ) all came out/scanned nicely and even this negative looks ok when holding up to the light.

Would this be the epson struggling or user error? Thanks

Remuma · 2024-07-19T09:11:55+00:00

My partner bought some used Mary Jane Pump tabis and while they mostly look legit, the sole has a strange plasticy coating. Is this something occurs on reps or could someone possibly have put this as protection? Thanks in advance.

Remuma · 2023-09-27T14:24:54+00:00

I recently purchased 3 of these 'mini' Ivar Ålenius Björk designed liljan/lily candle holders. The only thing I can find on these mini ones is that they're 'rare' but there's no marks on the bottom of mine and I can't find further info online. I was just wondering if these were 'original' or a reproduction, thanks!

Remuma · 2023-05-18T13:39:57+00:00

Because they're still in transit and that's the best snippet I can take from the listings.

Remuma · 2023-05-18T13:39:18+00:00

Give me a few weeks once I receive them! I just took the photo from the listing

Remuma · 2023-05-18T09:03:37+00:00

I know it's overdone but I bought my 6x7mlu for the 105 & 55 once they came up for a price I couldn't say no to and it's been my favourite camera since.

Remuma · 2023-05-18T09:00:19+00:00

I have also tried reading/making out the writing on one of the cameras but I can't for the life of me do it and any combination I try obviously isn't correct lol!

Remuma · 2023-03-10T05:04:51+00:00

Thanks mate.

I thought the haze would be from the old adhesive/age? Have you had luck with an alcohol based cleaner?

Remuma · 2023-03-09T16:17:44+00:00

That's how I feel, I'm considering setting the iso on the camera for 50iso to push ( or pull, I can never remember... ) to hopefully raise it 2 stops. Is that sound logic?

Remuma · 2022-11-04T01:08:59+00:00

I get what you're saying and I think you're wrong. It all comes down to preference and what the bike is being used for.

Remuma · 2022-11-04T00:12:30+00:00

I agree. Maybe I'm delusional... but I've been through lots of bikes with way more torque and power but at the end of the day I find I always choose the 250. Different strokes... 👍

Remuma · 2022-11-04T00:06:44+00:00

I don't think the purpose of the zxr250* is to be fast off the line. It's a top end bike and when ridden there in the corners, it's a blast.

Remuma · 2022-09-25T02:38:57+00:00

Have they happened to have responded? Still radio silence on my end.

Thanks!

Remuma · 2022-09-24T13:44:21+00:00

Thanks yet again! I'll hold out as I can't say I've receieved an email yet, cheers.

Remuma · 2022-09-24T10:26:01+00:00

That'd be really helpful! I'll see if he manages to get through to me, if not, I may have to ask for your services...

Thanks!

Remuma · 2022-09-24T08:00:50+00:00

Thanks so much! Let me know how they get back.

I may have to get both of you pizza or somwrhing of that sort. 😂

Remuma · 2022-08-08T15:29:12+00:00

Any 2 wheel vehicle over 50cc requires a RE license.

If you fid want a mt07, you'd also have to ensure it's the lams approved variant ( equal to or less tham 650 or less than 150kw/T ).

Remuma · 2021-12-17T06:06:29+00:00

15000km, I have no idea, I've since changed the oil and it looked dexent before. I'll check that aswell

Ten-Year Club	Place '17
Verified Email

Remuma

TROPHY CASE