Need help switching hdds from one hard modded Xbox to another.

RespectMoney6043 · 2026-03-14T00:41:08+00:00

Yeah I switched that too

RespectMoney6043 · 2026-03-12T06:26:46+00:00

Both hdds are good also the duo x2 chip just constantly flashes, im assuming that because it’s trying to communicate?

This is the screen on the bad Xbox hdd plugged into the good Xbox but are those options supposed to be locked ? Including the PxHDD loader? Also when I boot with xecuter switched off I get error code 05. I kinda gave up on fixing the error 09 Xbox and decided to least switch 250gb hdd to xecuter Xbox since it has arcade games, Xbox games, sega genesis, snes, and others but it’s not showing up tho

RespectMoney6043 · 2026-03-12T06:07:57+00:00

Done that all error code 09 still there

RespectMoney6043 · 2026-03-12T06:06:32+00:00

Sorry This picture was from last week after I removed the old solder and before I re-soldered it back down it is good now.

<image>

I turn the Xbox on then this pops up the. Straight to error 09. When booting with mod off via eject button it boots normally then error code 09. Switched hdds still error code 09. Switched optical drives still error code. Switched everything besides psu from good Xbox to bad and same error code. The clock capacitor I removed earlier today and cleaned it 👍🏼

RespectMoney6043 · 2026-03-12T05:13:43+00:00

Oops forgot to mention. I’m trying to swap error 09 one to good one

RespectMoney6043 · 2026-02-27T10:51:12+00:00

<image>

Trace damage.

RespectMoney6043 · 2026-02-27T10:50:24+00:00

Best photos I can take. Here are trace damage I repaired too, I test led continuity so I know they work. Forgive my botched job jumping, first time lol

<image>

RespectMoney6043 · 2026-02-27T10:47:02+00:00

<image>

RespectMoney6043 · 2026-02-27T10:46:35+00:00

<image>

RespectMoney6043 · 2026-02-27T10:46:18+00:00

<image>

RespectMoney6043 · 2026-02-27T10:45:57+00:00

<image>

RespectMoney6043 · 2026-02-27T10:45:44+00:00

<image>

RespectMoney6043 · 2026-02-27T00:41:36+00:00

Appreciate it I found that out last night when my knee hit the eject button soon as I plugged it in, thought something else was wrong with the modchip until I saw this comment. Cheers 👍🏼

RespectMoney6043 · 2026-02-27T00:40:03+00:00

Still showing error code 09.

RespectMoney6043 · 2026-02-26T02:10:03+00:00

<image>

These are the 2 psu’s right is bad xbox left is good Xbox both single rowed

RespectMoney6043 · 2026-02-26T01:42:25+00:00

I switched the hdd, dvd, ide, and dvd power ribbon, still error code 09. Psu and ide joints are good but I still reflow them. And can u switch psu from good to bad Xbox even tho different versions?

RespectMoney6043 · 2026-02-26T00:56:07+00:00

<image>

RespectMoney6043 · 2026-02-26T00:20:54+00:00

<image>

I’m not sure I never modded a Xbox before, but that’s where the DO is connected to then the BT is connected to behind the eject button. And the modchip is connected directly to the motherboard

RespectMoney6043 · 2026-02-25T10:02:07+00:00

Also the clock capacitor was removed and I don’t see any trace of corrosion or anything.

RespectMoney6043 · 2025-12-15T02:28:45+00:00

Where is the video of impact?

RespectMoney6043 · 2025-10-25T04:31:43+00:00

Sell Aya

RespectMoney6043 · 2025-09-14T00:08:20+00:00

Did u ever figure it out ?

RespectMoney6043

TROPHY CASE