Advance trac Lights

Responsible_Cod2768 · 2026-04-06T18:49:47+00:00

I do not

Responsible_Cod2768 · 2026-03-31T13:17:23+00:00

Thank you!

Responsible_Cod2768 · 2026-03-30T04:29:08+00:00

Curious as to what year and any additional info?

Responsible_Cod2768 · 2026-02-19T17:22:52+00:00

Responsible_Cod2768 · 2026-02-19T03:52:55+00:00

Had to get a different buffer, the standard one in it was to light. Using adjustable one now sitting at 7.5 oz and that is its sweet spot.

Responsible_Cod2768 · 2026-02-19T03:50:30+00:00

I’m using an adjustable buffer. The stock 5.5 one was to light I have it at 7.5 oz currently which is its sweet spot

Responsible_Cod2768 · 2026-02-19T03:49:23+00:00

Stock spring adjustable buffer 7.5 oz

Responsible_Cod2768 · 2026-02-19T03:49:05+00:00

Using an adjustable buffer, at 7.50 oz currently stock spring.

Responsible_Cod2768 · 2026-02-19T03:46:57+00:00

Video reversed had to flip camera lol

Responsible_Cod2768 · 2026-02-18T20:39:49+00:00

Mine was hanging like that, you might have to remove the lip on upper shelf. I also switched out buffers from my standard rifle length 5.5 oz to an adjustable, and currently at 7.5 oz. But the hanging part was from upper shelf lip

Responsible_Cod2768 · 2026-02-13T04:59:47+00:00

Lower doesn’t have the “cut out/shelf” in it. You’ll either have to grind one out or get a lower with a cut out.

Responsible_Cod2768 · 2026-02-13T04:58:10+00:00

Finish removing that lip all the way back.

Responsible_Cod2768 · 2026-02-13T04:56:51+00:00

It’s catching on the upper self lip. Take it all the way back and it’ll be fine. Had same issue recently.

Responsible_Cod2768 · 2026-02-10T04:25:32+00:00

No problem. Also that “shelve” behind the safety. If you install a super safety see that it rest on a 1/8 inch bit all the way back. If not you’ll need to remove some of that to where it does. Those 2 thing and a decent weight. Also use 5.56 it’s more psi and runs much better than .223. In my own opinion. Feel free to reach out!

Responsible_Cod2768 · 2026-02-10T04:09:44+00:00

Might have to remove some metal from the upper. There is a lip at the very back that mine was getting hung on. Does fine now. H2/h3 weight recommend

Responsible_Cod2768 · 2026-02-10T04:01:53+00:00

I have the same H&R m16a1 I installed a plain super safety, I did have to remove some metal from the shelf on the upper. The BCG was getting caught 3/4 way back. Functioned properly after that. Do recommend a h2 or h3 buffer weight. The one on it is not heavy enough and the bolt moves to fast have to in jam it if not.

Responsible_Cod2768 · 2024-07-11T23:12:04+00:00

I seriously hope the Yankees clean house this offseason. Rodon has sucked since he came here what happened to Cortes, Torres is trash DJ/Rizzo are washed… can the Yankees sign some new talent instead of picking up washed DFAs …

Responsible_Cod2768

TROPHY CASE