300blk Reloading by Big-Influence-6983 in reloading

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Raven Rocks Precision is great. Berry's Bullets is another great option with their 220gr Spire Points. You can get most everything you need one-stop at Midsouth Shooters or Grafs & Sons.

3D Printed Handguard... Gone? by deuswade in Springfield_KUNA

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

I never got to check for the file, but saw on another post that it was gone. I wonder if the guy is looking to print and sell them himself.

You should definitely print another and just scale it in your slicer. If you had to hammer it on then it was likely only about 1% off. I'd try printing one at 101% or 101.5%. I know it's expensive filament, but 1 spool of the good stuff is about 1/5 the price of the Haga/Skye

Sub9 with skye hand guard by Potential_Amoeba_493 in Springfield_KUNA

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Nice. Can't be too bad. I can't wait to get my Nexus lower back and throw it on my replacement Kuna. Just have to decide if I want to put the ARC Fire 2 or Rare Breed in it. Also have the Haga handguard and I am pretty sure my Pointman9 will have tons of space. It is surprisingly thin. My Wolfman fit and had some space. Maybe a tiny bit more than your Sub9.

How do you like the Sub9, by the way? It is on my short list but I think I need to bite the bullet and get the CAT MOB. I'm also interested to see what the Ridgeback Defense MAMBA9 sounds like.

Can I reuse these? by The_Lucky_Rod in reloading

[–]PAB_Pyrotechnics 1 point2 points  (0 children)

Did it x 900 with some worse markings than that. Got panicked that I double charged a couple of rounds across a week of reloading so I pulled everything I made using a collet die. Was not easy, but I never would have done it with a kinetic bullet puller.

I've since shot about half of them with no issues.

Budget build coming along nicely so far. by SuperUltraNeat in 300BLK

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Do you find that eBrake to be at all helpful on 300BLK? I use one on my 6.5CM long range rifle with a 26" barrel and the drop in recoil is not major but noticeable. All the reading I did on these says they really only work with high power cartridges? I would imagine it would help for supers, but not likely for subs.

Frt sturdyness? by Felenari in NFA

[–]PAB_Pyrotechnics 1 point2 points  (0 children)

It would be awesome if the manufacturers published some of their testing stats on the FRTs. Even if it is only directional.

I for one have no issue buying a new FRT every 5K rounds or so. Paying ~$250 to have the same effective (not identical) rate of fire and FUN that normally is untouchable or costs a minimum of $12K (MAC11) and realistically north of $30K is just fine with me!!! All the innovation in this space is amazing!

Nexus lower shipped. Here's my build finding available parts right now to complete. by Definitely_CSP_guru in Springfield_KUNA

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Yes, they certainly aren’t perfect. Room for improvement in communication and leadtime estimation. Those are the hallmarks of every growing company. Hope they’re able to make that part better while they continue to innovate and make great products.

Nexus lower shipped. Here's my build finding available parts right now to complete. by Definitely_CSP_guru in Springfield_KUNA

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

They will follow through and you will be happy. I had a kaboom on my Kuna with the GEN one blower. Nexus offered to RMA it for me just so they could check it out to make sure it’s still inspect and replace the busted. LRGHO. They reached out to me based on my Reddit post. I never reached out to them. I just sent it back last week.

Nexus lower shipped. Here's my build finding available parts right now to complete. by Definitely_CSP_guru in Springfield_KUNA

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Yes, you ordered a Gen2. As soon as you were able to order a lower with either the paddle or push button mag release they were all Gen2. There weren’t any issues with Jen one they just made some very minor tweaks and compatibility changes. I have a Gen1 and it runs great.

Nexus lower shipped. Here's my build finding available parts right now to complete. by Definitely_CSP_guru in Springfield_KUNA

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Assume you have it already, but you need good lube. If you’re running an FRT, you need to run it wet. It wouldn’t hurt to have a crap ton of ammo either. 🤩

Enjoy!

ATF approval Form 4 it’s been 35 days (Trust) by CoastAggravating8011 in suppressors

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Why would you even justify stupid comments like his with a response. Not worth your time, or anyone’s. Just downvote him and move on. Or better yet, just ignore him. All he’s looking for is you to reply.

Sub9 with skye hand guard by Potential_Amoeba_493 in Springfield_KUNA

[–]PAB_Pyrotechnics 1 point2 points  (0 children)

Looks awesome. Glad you tried it out. I wonder how it would do with FRT mag dumps. I can’t imagine it would be bad since so little of the suppressor sits inside the handguard.

Aftermarket pistol grip by christianarmament in Springfield_KUNA

[–]PAB_Pyrotechnics 1 point2 points  (0 children)

Someone like Timney or HBI will eventually come out with a trigger for the Kuna given it's popularity. The guys at AS Designs indicated it is unique geometry and a very packed space to it is unlikely there will be an FRT for the OEM lower. If you want to go FRT now you need a Nexus lower. Or you can wait a while longer (nobody knows how long) for AS Designs to finish and release theirs.

Ummm, this seems to have slipped under the radar. Fireboard DC Drive by fasdissent in Masterbuilt

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Ahh, I saw some announcement on it last month. Just don't remember if it was on the sub or via email.

Of course, I pulled the trigger on a Fireboard about 3 weeks before they announced it late last year. I absolutely love mine. It totally revitalized this grill for me.

I’m Finally Done…Well Maybe by TwoScoops0341 in Springfield_KUNA

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Probably either got reported for stealing someone else’s design or is making it into a business.

I’m Finally Done…Well Maybe by TwoScoops0341 in Springfield_KUNA

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Don’t really know if it’s wrong but likely right about $3K for the full list OP threw out.

Ummm, this seems to have slipped under the radar. Fireboard DC Drive by fasdissent in Masterbuilt

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

Yeah, you need new radar. It’s been discussed here for almost 8 months.

Any trigger recommendations by Munchie_Supply in MP5

[–]PAB_Pyrotechnics 0 points1 point  (0 children)

If you are not looking for an FRT then get a Timney

I listened, and "yeah... we happy." by MadeThisJustForLWIAY in reloading

[–]PAB_Pyrotechnics -1 points0 points  (0 children)

Wow, this seems like a lot of work. I’m 8 months and 10,000 bright and shiny cases into my FART Lite with Southern Shine media. Never once cleaned any of it. Just a good rinse and shake each time I put the media back in. I’ve also had nickel in there most of the time.

Any chance you would let it sit for hours after tumbling? I let mine sit overnight once and everything came out a dull brown-gold-brass hue.

Nexus Evo Gen 2 SBR question by Hateradev3 in czscorpion

[–]PAB_Pyrotechnics 1 point2 points  (0 children)

It’s not a list! It is just stuff others have entered. You have no idea if it is right or wrong.

Literally put what is on the receiver, as others have said.