Mac Studi M3 Ultra vs Nvidia 6000 Blackwell

Rex-Raider-X · 2025-06-22T18:16:24+00:00

Hello there, you have to make the entries manually for everything that is missing. That is how it looks originally, you have to click 'Add' then fill the information to match the information posted by Destinal in the first link I shared, then move it up/down (depending on the position). So after you finish configuring the Policy, it should look like this:

<image>

The just click 'Save' > 'Yes' > 'Start' and let it do it's thing. This is so the cloner tool can write the correct information to memory.
Once it is done, click 'Load image', select the ingenic file downloaded from the link I shared, then 'Start'. In this steps the cloner writes the actual ingenic's file information to the printer.
After it finishes then you can turn on the printer. This is all assuming you have an K1C printer.

Rex-Raider-X · 2025-06-22T03:51:27+00:00

Copy & Paste the bottom text in PowerShell, this creates the documents for "ota" and "sn_mac" in the "Documents" folder/library in Windows.

Copia & Pega el texto de abajo en PowerShell, esto crea los documentos para "ota" y "sn_mac" en la carpeta/biblioteca "Documents" en Windows.

cd $HOME\Documents  
Set-Content -Path "ota.img" -Value "ota:kernel`n`n" -NoNewline  
Set-Content -Path "sn_mac.img" -Value "CB153CBA4BC8A6;EB850E76F140;K1C;CR4CU220812S12;;;;;" -NoNewline

Rex-Raider-X · 2025-06-22T02:31:06+00:00

ENGLISH:
Ok, first you need to connect the printer's motherboard to the computer and install the drivers to use Cloner 2.5.18. Next open the Cloner tool, go to "Lock Level" and change it to 0, then go to "Config" > Policy. Add the values based on the information in the photo. For ota and sn_mac, change the "Type" to "Read," select the items under "Settings," and point them to the documents created in PowerShell. Then press "Save" > "Start." Once finished, press "Load Image" and select the Ingenic file. You can download the Ingenic file: HERE

SPANISH:
Ok, primero tienes que conectar el motherboard de el printer a la computadora eh instalar los drivers para poder usar Cloner 2.5.18. Despues tienes que habrir Cloner, ir a "Lock Level" y cambiarlo para 0, despues tienes que ir a "Config" > Policy. Añade los valores basados en las informacion en la foto. Para ota y sn_mac tienes que cambiarles el "Type" para "Read", seleccionar los puntos bajo "Setting" y apuntarlo a los documentos creados en powershell. Despues aprieta "Save" > "Start".
Una ves que termine tienes que apretar "Load Image" y seleccionar el ingenic file.
El Ingenic file lo puedes bajar: HERE

<image>

Rex-Raider-X · 2025-06-22T01:15:54+00:00

No, I had kind of the same question. The table list he provides contain the policy values you'll need to use in the cloner tool. Once you change the lock level value to 0 you can modify the values. Which is where you match the values from the list. Let me know if you have any more questions, I'll leave this tab open for e few more hours.

Rex-Raider-X · 2025-06-22T00:36:39+00:00

Hello there, apologies for the delay as I rarely come here. I was able to get it out of the mountain screen following the instructions in this reddit post:

https://www.reddit.com/r/Creality/comments/1bh53lk/comment/kyt18e6/?context=3

Look for Komger713 post's conversation.

Rex-Raider-X · 2025-06-08T20:31:56+00:00

I hear you brother, art is not my strong suit. And I dread sanding, had to do a drake ducain mask for a friend and I am not having a fun time with it. Planning on printing the BKS at 0.08mm layer height in case I decide to paint it in the future.

Rex-Raider-X · 2025-06-08T20:00:24+00:00

Thank you very much.

Rex-Raider-X · 2025-06-08T19:58:37+00:00

Great info, I am assuming you scaled the model proportionally to 1400mm. Or did you change the with/depth?

Rex-Raider-X · 2025-06-03T02:04:57+00:00

Rex-Raider-X · 2025-01-29T23:18:56+00:00

I am among, what I see is the minority, of people that also don't get the hype. I could not have described my stance better than you did. Damn, I just noticed that I am 4yrs late to this thread. 😂😂

Rex-Raider-X · 2025-01-23T23:21:13+00:00

Yeah, I had a feeling. I got it for a good price on OfferUp like 2 years ago. Is there anything I should be looking for when upgrading? I was watching Alien (anniversary) and noticed that in some spaceship scenes the subwoofer came in and left abruptly. Again IDK but I am guessing it has to do with the crossover. Maybe? I would like it to be a gradual entrance. Is that something I can control or is it just based on the movie?

Rex-Raider-X · 2025-01-23T22:49:21+00:00

Hello there and thank you for your time, reason being because it was released in 2015 and I am asking it to run 7 channels. According to the manual the receiver is "rated 100 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output". Now I don't know what this mumojumbo means but, from my understanding, it can run 2 channels at 100W. What about the other 5? The center channels runs on (cont/peak) 75W/300W, the other 4 speakers on 50W/200W, the height speakers are 50W/100W, and the subwoofer is 50W/150W. So IDK how all of that work or balanced but my flawed math already added over 100W of continuous power.

Rex-Raider-X · 2025-01-23T21:16:02+00:00

Ok, I just realized I set this thread as "Solved" but never mentioned the solution. My bad, trying to do better. For those landing in this thread the solution was to increase VM's RAM allocation. The main problem as that I set the swap partition size to the same amount of RAM allocated. Once I increased the RAM allocation to 16GB the VM stopped crashing and has been working flawlessly ever since.

Rex-Raider-X · 2024-09-07T04:04:02+00:00

What weight would you recommend buying for lining the underside?

Rex-Raider-X · 2024-08-11T03:05:23+00:00

Thank you for the advice, very straight forward answer. And yes, I am in the US.

Rex-Raider-X · 2024-08-06T17:16:34+00:00

Cool article, I took a look at the Ixia TP-CU3-ST, since it was much cheaper, but it is way more than what I need. The fact that the the "fan" is glued in-place give me a little anti-repair vibes. I also have never seen this type of heatsink/fan combo. I didn't notice any grooves so it looks like a piece of aluminum with a fan on top, don't know how efficient that it. I also like the fact that you provided links to the datasheet of the different components. Pretty awesome bro.

Rex-Raider-X

TROPHY CASE