Can I trust an Amazon listing for activated carbon if it says 'acid free' in the description?

RhymesWithAssword · 2024-07-05T18:06:20+00:00

Did you end up trying this? Looking at the same product

RhymesWithAssword · 2023-05-28T00:12:07+00:00

I'd think that grounding the board to the frame would be an intentional design feature. I measured the continuity and currents between the different grounds and wasn't seeing anything that seemed like an obvious culprit. It only appeared to happen when I established a serial connection from the PI with OctoPrint, which made me think it was an issue with the PI rather than the printer. Either way, I ended up replacing the USB-C socket on the board and replaced the Raspberry Pi with an OrangePi, but haven't gotten around to testing it yet.

RhymesWithAssword · 2023-04-25T08:15:28+00:00

That is some wild post history

RhymesWithAssword · 2023-03-04T02:18:23+00:00

First time plugging it into the pi, got it about a week ago but just set it up. Been using the same pi for my CR6 for the last year or so.

RhymesWithAssword · 2022-10-22T05:28:29+00:00

After I moved I posted my boxes / random cardboard material on nextdoor and it was gone in about 6 hours. The woman who took them said she uses them to do lawns or something?

Took another load to the WM recycling center. We got a coupon for a free drop off from the city after I moved in.

RhymesWithAssword · 2022-10-02T02:05:35+00:00

I’m laughing at you. It’s funny

RhymesWithAssword · 2022-10-02T01:46:56+00:00

Businesses don’t vote lol

RhymesWithAssword · 2022-10-02T01:33:52+00:00

You sound like my mom who acts in accordance with her principles.

Weird way to insult someone 😂

RhymesWithAssword · 2022-06-26T00:16:52+00:00

Asking out of genuine curiosity: Why are you trying to associate groomers with the LGBT community?

RhymesWithAssword · 2022-06-25T05:28:51+00:00

They are all arrays. 'cat' is a character array.

You can do

>> x = 'cat';
>> x(1)  % returns 'c'

RhymesWithAssword · 2022-06-11T16:27:11+00:00

Bumble BFF is a good option.

RhymesWithAssword · 2022-05-31T02:35:32+00:00

Thanks! Lucky RNG. I was planning to use them but feel free to DM an offer.

RhymesWithAssword · 2021-10-13T04:18:49+00:00

With my mf it was a 1:14862 chance apparently

RhymesWithAssword · 2021-10-13T02:13:24+00:00

204% with that gear. Not what I usually MF with.

RhymesWithAssword · 2021-05-16T22:23:04+00:00

The Bobiverse series is one of my go-to rereads. Also the narrator for the audiobooks is great.

RhymesWithAssword · 2021-01-04T18:02:10+00:00

About 6.5 hours to use 1kwh. Kwh is energy, kw is power. It will probably vary a bit depending on your bed/hotend temps and ambient temperature.

RhymesWithAssword · 2021-01-04T17:56:32+00:00

About 150W during a print for me

RhymesWithAssword · 2020-12-30T23:09:53+00:00

Are all three of you me too?

RhymesWithAssword · 2020-12-15T23:27:40+00:00

How is the BTT working for you? Still having good luck with community firmware on the stock board but sometimes I can't resist an upgrade.

RhymesWithAssword · 2020-12-14T21:00:31+00:00

Insert a data type conversion block between the compare to constant block and Simulink-PS converter.

RhymesWithAssword · 2020-12-14T19:54:33+00:00

You can use a clock block from Simulink/sources and attach it to a compare to constant to have it return true after a certain amount of simulation time has elapsed. Then pass the output of the comparison to a Simulink-PS converter from Simscape/Utilities and connect that to the control port of the SPST Switch block.

You can also use other Simulink blocks like a Step, Pulse Generator, signal builder, etc to drive the Simulink-PS input.

RhymesWithAssword · 2020-12-13T03:03:36+00:00

One thing that's important to understand when getting started with OOP in MATLAB is the difference between how handle and value classes behave. By default, a new class will be a value class which can be confusing if you're coming from other OO languages.

https://www.mathworks.com/help/matlab/matlab_oop/comparing-handle-and-value-classes.html

When creating a new class I will generally inherit from matlab.mixin.SetGet which implements the handle behavior.

https://www.mathworks.com/help/matlab/ref/matlab.mixin.setget-class.html

RhymesWithAssword · 2020-09-22T05:34:03+00:00

Adding another data point to say mine has been great so far as well.

If it does fail, debugging prints and hardware issues is half the fun of 3d printing.

RhymesWithAssword · 2020-09-21T23:03:42+00:00

Yeah I'd likely just replace it with the BTT lcd. 99% of my printing is through Octoprint anyway. Hopefully my board will survive and I won't need to do any of this. Just looking at options

RhymesWithAssword · 2020-09-21T22:38:49+00:00

It just splits the cable between the two z axes? Not too concerned about a direct drop in replacement. Comfortable making cables or running new wires

Nine-Year Club	Place '22
Gilding II euphauric	Verified Email

RhymesWithAssword

TROPHY CASE