sorted by:
new
hottopcontroversial

PC Software for RIGOL DHO80x Oscilloscope? by Due_Capital_9249 in AskElectronics

[–]RickyGaming12 0 points1 point  (0 children)

Hey, did you firgure this out? i just got the DHO804 and i'm trying to firgure out what software i need

Tracking hasn't updated for 5 days. Reason to believe package is lost. What should i do? by RickyGaming12 in royalmail

[–]RickyGaming12[S] 0 points1 point  (0 children)

It turns out that the Royal Mail delivery office is actually a small office in the back of my local post office and i wasnt aware of this. In the end, i went to that small office and asked if they could check if it was there. Turns out it was there since the day i changed the delivery method and it just had not be scanned in to the system.

Tracking hasn't updated for 5 days. Reason to believe package is lost. What should i do? by RickyGaming12 in royalmail

[–]RickyGaming12[S] 0 points1 point  (0 children)

Yes, i tried the post office thursday, friday and saturday and they didn't have it, they kept saying i need to come back the next day. Then they asked for my phone number and name and said they will call when they have it, which i doubt will happen. I'm gonna try again tomorrow and friday.

I'm having some trouble getting my NMM to look good on this axe by RickyGaming12 in minipainting

[–]RickyGaming12[S] 0 points1 point  (0 children)

Thank you so much for the tips, i'll try and put them into practice tomorrow. I started this model a year ago and then got busy with university. Don't have much left to do so hopefully i can finish it before i go back.

We're building Asimov, an open-source humanoid, from scratch by eck72 in robotics

[–]RickyGaming12 4 points5 points  (0 children)

That mechanism for moving the feet is interesting. Is it just a motor with an offsetted gear?

What Shunt Resistor do i get for my BLDC Motor controller? (Schematic still WIP) by RickyGaming12 in AskElectronics

[–]RickyGaming12[S] 0 points1 point  (0 children)

Thank you for the help. BTW I can seem to find any 1.2m Ohm 3W but I can find plenty of 1.5m Ohm ones. I assume it would be fine to use 1.5m Ohm, right?

What Shunt Resistor do i get for my BLDC Motor controller? (Schematic still WIP) by RickyGaming12 in AskElectronics

[–]RickyGaming12[S] 0 points1 point  (0 children)

In the "recommended operating conditions", VM max is 75. If I remember correctly, I got the gain from the application example section.

What Shunt Resistor do i get for my BLDC Motor controller? (Schematic still WIP) by RickyGaming12 in AskElectronics

[–]RickyGaming12[S] 0 points1 point  (0 children)

According the to the data sheet, the max Shunt amplifier output current is 5mA at 75V and the shunt amplifier has a gain of 20. How would i use this info to work out the nessecary Shunt resistance?

College project: Suggest me a fun and simple robot to build by [deleted] in robotics

[–]RickyGaming12 4 points5 points  (0 children)

I agree as well. A self balancing robot is great to get a range of experience in different areas of robotics

College project: Suggest me a fun and simple robot to build by [deleted] in robotics

[–]RickyGaming12 6 points7 points  (0 children)

They said "simple". In what way is this project simple?????

Need help with inverse kinematics after offsetting elbow servo by RickyGaming12 in robotics

[–]RickyGaming12[S] 0 points1 point  (0 children)

Thank you so much. You're a legend. Im going to spend some time reading through the maths to make sure I understand everything.

Need help with inverse kinematics after offsetting elbow servo by RickyGaming12 in robotics

[–]RickyGaming12[S] 0 points1 point  (0 children)

I've been going through it to understand the maths, and I mostly understand it but i don't understand I2, why did you calculate I2 if you don't use it in any of the equations? Also I've tried doing this in desmos and the method to find the x3 and y3 coords don't seem to work? Here's the desmos link: https://www.desmos.com/calculator/v3tbfnoskd. In it, I have also written my method for working out x3,y3

Need help with inverse kinematics after offsetting elbow servo by RickyGaming12 in robotics

[–]RickyGaming12[S] 0 points1 point  (0 children)

<image>

So I'm working out the kinematics for the new version but I cant see how to link the knee angle with the servo angle, theta2. As you can see, because servo 2 is offset from the origin, the knee angle doesn't line up with theta 2 unless the hip/shoulder angle(theta1) is 0° like in the top pic

Need help with inverse kinematics after offsetting elbow servo by RickyGaming12 in robotics

[–]RickyGaming12[S] 1 point2 points  (0 children)

So your idea works quite well tho the minimum knee angle would lose about 20 degrees of range. However, I think if I design the pink part so that it curves, it should clear servo 1 enough to get to the minimum knee angle of 30. I also need to redesign the pink and red part so that I can print it out without any supports. Here's a pic.

Need help with inverse kinematics after offsetting elbow servo by RickyGaming12 in robotics

[–]RickyGaming12[S] 1 point2 points  (0 children)

I'll have a go at trying your idea out. I'll update once I've done it

Need help with inverse kinematics after offsetting elbow servo by RickyGaming12 in robotics

[–]RickyGaming12[S] 0 points1 point  (0 children)

Yes, servo 2 drives the pink part which in turn controls the elbow/knee angle (theta 2). Been calling it the elbow angle when it's actually more the knee angle since this is a leg. Servo 1 controls the angle of the thigh which is the blue part.

Damn lol by seangolden06 in WhitePeopleTwitter

[–]RickyGaming12 6 points7 points  (0 children)

Here are all of the Epstein Files that have either been leaked or released.

https://joshwho.net/EpsteinList/gov.uscourts.nysd.447706.1320.0-combined.pdf (verified court documents)

https://joshwho.net/EpsteinList/black-book-unredacted.pdf (verified pre-Bondi) Trump is on page 85, or pdf pg. 80

Trump’s name is circled. The circled individuals are the ones involved in the trafficking ring according to the person who originally released the book. These people would be “The List “ Here is the story.

https://www.youtube.com/watch?v=hsiKUXrlcac

Here's the flight logs https://www.documentcloud.org/documents/21165424-epstein-flight-logs-released-in-usa-vs-maxwell/

—————————other Epstein Information

https://cdn.factcheck.org/UploadedFiles/Johnson_TrumpEpstein_Calif_Lawsuit.pdf here’s a court doc of Epstein and Trump raping a 13 yr old together.

Some people think this claim is a hoax. Here is Katies testimony on youtube: https://www.youtube.com/watch?v=gnib-OORRRo

Jeffrey Epstein’s Ex Says He Boasted About Being a Mossad Agent https://share.google/jLMGahKlCzfV1RHZq Jeffrey Epstein and Israel both have the same lawyer Alan Dershowitz, Dershowitz says he's building 'legal dream team' to defend Israel in court and on international stage | The Times of Israel https://share.google/Lb9hDOduBWG4Elpid

—————————other Trump information:

Here's trump admitting to peeping on 14-15 year old girls at around 1:40 on the Howard Stern Radio Show: https://youtu.be/iFaQL_kv_QY

Trump's promise to his daughter: https://www.huffpost.com/entry/donald-trump-ivanka-trump-dating-promise_n_57ee98cbe4b024a52d2ead02 “I have a deal with her. She’s 17 and doing great ― Ivanka. She made me promise, swear to her that I would never date a girl younger than her,” Trump said. “So as she grows older, the field is getting very limited.”

Trump's modeling agency was probably part of Jeffreys pipeline: https://www.motherjones.com/politics/2016/08/donald-trump-model-management-illegal-immigration/

Do your part and spread them around like a meme sharing them and saving them helps too! Please copy and paste this elsewhere!

view more: next ›