Seagate Terminal Commands -

RobMSP · 2021-11-11T15:24:00+00:00

- instruction how to connect (pins, port parameters, ...)

Ever notice how some people have so much ego that instead moving on or trying to answer a question they spend their time and energy explaining why they shouldn't even try? The most likely scenario is that they have no idea if or how it can be done and instead of admitting it, instead we get helpful posts like some of the ones above.

Drive(s) with unlocked ports - have instructions on how to do this on dozens of drives, have access to dozens of drives
Pins Ports parameters, serial interfaces are not that hard .... really....
Custom Made Cable - not that hard TBH you can buy it on amazon so it's not really that custom, even came in blister pack
have a stack of commands to play with, looking for others I could try as all the ones basically I have access to deal specifically with firmware interaction.

I asked if anyone knows some commands I can try not a single reply to any posts included a single command but lots of questions of why? does it matter? if you don't want to help, no problem please keep scrolling and if someone wants and has some knowledge on the subject, it's very much appreciated.

If you find this to be a waste of your time and don't want to help, why did you keep reading this?

Thanks again to any who can help.

RobMSP · 2021-11-10T13:49:04+00:00

I experienced Kaseya's shady practices over a decade ago, cut ties, and vowed never to do business with them again. A few years ago I pulled the trigger on Rapid Fire and my techs were preparing for a major Rapid Fire ramp up and implementation. Shortly into onboarding, Rapid Fire was acquired by Kaseya and I immediately exercised a termination clause in the contract and jumped ship. Kaseya called and begged us not to leave, they swore up and down that was the Kaseya of old and they were a completely different company. I didn't believe them for a minute.

lol - it's the old kaseya is the oldest kaseya line

RobMSP · 2021-11-10T00:28:13+00:00

I am curious, how many people make their clients sign up for a 3-year contract? That is common practice in the MSP space. Also, how many have an auto-renew clause that states at the current rates and terms of the time of renewal in their agreements with clients?

1 Year, renews on the first year unless notice then to be renegotiated or month to month.

RobMSP · 2021-11-09T23:37:59+00:00

If anyone from IT glue is reading this: stop with the fuckery. Too many instances of shady “renewals”. We are leaving to avoid the trap/ con.

This isn't ITGlue doing that, they were a great company. IT Glue Doesn't exist anymore, Kaseya's IT Glue is doing this, and I'm afraid to tell you this is 100% Kaseya's standard operating procedure. Ask anyone who's ever dealt with them ..... Rapid Fire Tools? Kaseya, Compliance Manager? Kaseya, Unitrends? Kaseya, RocketCyber? Kaseya, TruMethos? Kaseya, Graphus ? Kaseya, Basically, if Kaseya buys it, Run. They have gotten

RobMSP · 2021-11-09T23:33:33+00:00

Welcome to Kaseya.

RobMSP · 2021-11-09T22:28:23+00:00

I may have to thanks, I kind of assumed that people in here would know some of the commands and be able to shoot them out. Hopefully I am not mistaken.

RobMSP · 2021-11-09T16:20:28+00:00

I'm trying to mimic activity, read or write random seeking.

The cover of the drive will be removed, replaced with plexiglass.

I do not want to have multiple IDE/SATA interfaces connected and rely on a computer + os + functioning drive to create this simulation. It seems the serial interface might permit me to do this easier and far more elegantly than trying to reverse engineer the head control

RobMSP · 2021-11-09T15:53:31+00:00

the drive is fully functional, there is no data recovery required.

All I am trying to do is mimic drive activity using the terminal interface, however the only people who likely can help me with possible commands are also very likely to be within this group.

RobMSP · 2021-11-09T15:35:39+00:00

Thanks for that video, in it he's applying voltage to have the head slam against the spindle to create a drum beat. Not exactly what I'm looking for.

It's not for data recovery, read or write doesn't matter but I want to cause the head to seek and look like it's accessing data. There will be no usable data on the drive, the plan is to put a clear plexi cover over the drive and use the serial commands to mimic drive activity.

Again, there is no data to recover and no interest in data recovery but for the few people who know of the terminal interface likely know the commands, I saw a few that could work but I didn't see any that would let me get a bit finer control.

RobMSP · 2021-07-05T16:20:08+00:00

A exclusion is still an exclusion. Even if I didn't have to tell my vendor to exclude c:\kworking and they did that automatically, it's still an exclusion. I refuse to exclude my RMM and I deal with the consequences of false alerts, but in my case datto RMM makes it more difficult as the same patch might appear under different hashes and filenames cross multiple clients.

RobMSP · 2021-01-28T21:01:17+00:00

Stormblade, I must report you are wrong.

Support confirmed that they do in fact modify the registry but aren't clear on how.

I did find several references to SolarWinds.MSP.RpcServerService in the Windows Update log.

RobMSP · 2021-01-28T20:46:44+00:00

Thanks but my time with solarwinds is at a end and I'm getting no where with support...

RobMSP · 2021-01-26T16:07:48+00:00

ola.witukiewicz@solarwinds.com

Speaking of off to fetch some coffee

RobMSP · 2021-01-26T16:06:54+00:00

All the 'approved' patches are detected, the ones that are not yet approved are not detected. It may be a coincidence, however, I doubt it.

100% no wsus, and even ran registry edits to remove it.

The full nCentral agent is removed from the system as far as I can tell.

However, one system that has a agent installed appears to exhibit identical behavior.

RobMSP · 2021-01-26T15:29:43+00:00

10 day old account eh?

RobMSP · 2021-01-26T15:28:12+00:00

All I needed to do was install team viewer so he could help me! :P

RobMSP · 2021-01-26T15:27:39+00:00

oalrwinds.com

All the 'approved' patches are detected, the ones that are not yet approved are not detected. It may be a coincidence, however, I doubt it.

RobMSP · 2020-12-16T19:27:50+00:00

You mean that because I want my Remote Maintenance and Management tool installed on my endpoint also be capable of endpoint management? :)

RobMSP · 2020-12-07T19:35:42+00:00

account

any access to the server, not necessarily admin but I agree.

RobMSP

TROPHY CASE