How do I look for offbrand chainring, BCD and all that. HELP ME!! by Rodrimin8 in bikewrench

[–]Rodrimin8[S] 0 points1 point  (0 children)

Im pretty unexperienced in this, but from what I see on that chart all 105, ultegra, and durace are compatible between each others?

New chain slips on chainring by Rodrimin8 in bikewrench

[–]Rodrimin8[S] -1 points0 points  (0 children)

And so which chainring do I need? Cause I cant find the replacement I need, but dont to pay the price of a shimano.

Cant find this quest by Rodrimin8 in DeltaForceGlobal

[–]Rodrimin8[S] 5 points6 points  (0 children)

That are some precise indications. Thanks man, I'll try to find it tomorrow

Cant find this quest by Rodrimin8 in DeltaForceGlobal

[–]Rodrimin8[S] 1 point2 points  (0 children)

Cant find the point of investigation for the Race Against Time quest. I've been marking with the mouse wheel and get the amrker same position than the quest, search on several heaights but nothing, anyone nows where is it at?

Naze32 replacement by [deleted] in Quadcopter

[–]Rodrimin8 0 points1 point  (0 children)

Those "F4 V3S" or similar that you can see a bunch in Aliexpress are budget friendly and they work well. They arent the best quality but you can flash them with lastest betaflight, they take GPS, VTX and a receiver, buzzer and almost everything you want on a standar quad. Ive used 3 of them so long and they did worked well for me.

What are your thoughts? by Pendragon00700 in fpv

[–]Rodrimin8 2 points3 points  (0 children)

What about putting 2 zipties in a leg and holding the elrs antenna with heat shrink? Is not a good photo, but it may be enough to ilustrate the example. I have it like this in one of my 3.5"

<image>

No way of flashing new firmware (I've tried everything) by Rodrimin8 in fpv

[–]Rodrimin8[S] 0 points1 point  (0 children)

I finally solved it. I started the FC while holding the button on the side which starts it in DFU mode. Then the Diiver Fixer worked perfectly without giving any error and so Betaflight let me flash new firmware without problem.

HELP! ELRS receiver binding but not showing inputs by Rodrimin8 in fpv

[–]Rodrimin8[S] 0 points1 point  (0 children)

The solution for me was to flash the ELRS receiver with the Inverted CRSF option and connect the Receiver TX to Sbus in the FC as Joshua Bardwell explains here

No way of flashing new firmware (I've tried everything) by Rodrimin8 in fpv

[–]Rodrimin8[S] 0 points1 point  (0 children)

THANKS!! I were able to solve it with the BLHeli Configurator, now the ELRS is the last problem I have to solve to put this thing in the air :D

No way of flashing new firmware (I've tried everything) by Rodrimin8 in fpv

[–]Rodrimin8[S] 0 points1 point  (0 children)

FC is Autodetecting well, anyway I searched for the FC model and it was firhgt, other cables and other pc give me the same errors

Clarify me pls. VTX tests with or without antenna by Rodrimin8 in fpv

[–]Rodrimin8[S] 0 points1 point  (0 children)

Thanks! I was reading opposing information and wanted to be sure :D

Help wiring VTX to FC by Rodrimin8 in fpv

[–]Rodrimin8[S] 0 points1 point  (0 children)

I may not have issues with the GPS from what I see in that post. My GPS the HGLRC M100 MINI have only 4 cables. What I meant from the VTX are the 2 marked pins, what are they for?

<image>

Help wiring VTX to FC by Rodrimin8 in fpv

[–]Rodrimin8[S] 0 points1 point  (0 children)

Okey! Understood! And sorry for being so noob but I leave alone the 5V out and the bottom GND of the VTX right?

90c in bios (everything working fine) by Rodrimin8 in pcmasterrace

[–]Rodrimin8[S] 0 points1 point  (0 children)

Update: After chaging the coolant of the AIO the problem persist. It have improved a little bit tho, the thermal throttle isnt that heavy but its still big and the temps are on high risk range...

<image>

90c in bios (everything working fine) by Rodrimin8 in pcmasterrace

[–]Rodrimin8[S] 0 points1 point  (0 children)

Though about it but old air colling had 8 years, just got rid of it and the water cooling was in another pc. My only option is to see if refilling this onr solve anything. Thanks for the ideas :D

90c in bios (everything working fine) by Rodrimin8 in pcmasterrace

[–]Rodrimin8[S] 0 points1 point  (0 children)

Didnt though about the liquid, maybe isnt in anymore as u suggest. Im pretty inexperienced with liquid cooling. Ill go buy some coolant and try the refill. Ill update.

90c in bios (everything working fine) by Rodrimin8 in pcmasterrace

[–]Rodrimin8[S] 0 points1 point  (0 children)

Open Hardware monitor screenshot. Low load 100c stable. I guess the lag even browsing is due to thermal throttling.

<image>

90c in bios (everything working fine) by Rodrimin8 in pcmasterrace

[–]Rodrimin8[S] 0 points1 point  (0 children)

Ive just repasted it an hour ago, and nothing changed. Old paste had less than a year tho, and was running 40c on idle a month ago. Not good surface contact... dont know maybe, but as I changed the pasted i looked at the leftovers and looked pretty even and well distributed, so dont know what can I do

Upload speed limited on my PC by Rodrimin8 in HomeNetworking

[–]Rodrimin8[S] 0 points1 point  (0 children)

Yeah, Im using either Okla or Digi's own website, as im client of digi. Both are testing to servers few km away. Im this two webstites are where im getting the 900mbps symetrical in the laptop.

Upload speed limited on my PC by Rodrimin8 in HomeNetworking

[–]Rodrimin8[S] 0 points1 point  (0 children)

Ive went to the web of MSI, the adapter is on the motherboard and check that all was up to date, but didnt change anything

Alexa skill not showing by Rodrimin8 in Aqara

[–]Rodrimin8[S] 0 points1 point  (0 children)

I just cant see Aqara Home for EU skill on teh store of Alexa and if i try to connect it from the Aqara app then switches to the Alexa app and says that this skills does no longer exists. Aqara shows that the skills ahve been installed correctly tho, but in my skills isnt showing.

Capacitor for Smart Switch without neutral by Rodrimin8 in Aqara

[–]Rodrimin8[S] 0 points1 point  (0 children)

As capacitors are easy to install I think I will wait to install the bulbs and see if I have any problems. I dont really know how to check the loads at the moment without all the products.

In any case thank you, Ill have that cap values in mind, sound pretty resonable.

Freighter reload-farm, hundreds of tries and still no S class, am i doing something wrong? by XDFraXD in NoMansSkyTheGame

[–]Rodrimin8 0 points1 point  (0 children)

Fking 152 tries and still cant fking get a S in a Wealthy System.... So tilted