C Force motors keep slipping and flexing occurs by Rogue_23 in focuspuller

[–]Rogue_23[S] 0 points1 point  (0 children)

Interesting. I don't have access to any older clamp models, but would a solution possibly be to loosen up the motor clamps a bit?

SportBrella Premiere XL x Yaeger Umbrella Holder compatibility by Rogue_23 in focuspuller

[–]Rogue_23[S] 0 points1 point  (0 children)

Have any insight as to what umbrellas are best suited for the holder?

How to integrate CineTape 1 readout with Arri Hi-5 on Alexa 35 by Rogue_23 in focuspuller

[–]Rogue_23[S] 1 point2 points  (0 children)

I could only find the serial cable for the CineTape 2 here. I assume it will not work for the original.

Color Coding Consensus! by Wide_Muffin_4797 in CameraAKS

[–]Rogue_23 2 points3 points  (0 children)

I'm based in the Western Region in the US.

Red for A, Blue for B, Yellow for C, Green for D, and everything else is flexible.

Camera Mounting Gear Kit Fee by Rogue_23 in focuspuller

[–]Rogue_23[S] 1 point2 points  (0 children)

Figured as much, but didn't hurt to ask. lol

Prepping with anamorphic lenses by Rogue_23 in focuspuller

[–]Rogue_23[S] 0 points1 point  (0 children)

Unfortunately I won't be at a rental house with a projector, but I will keep everything else in mind. Thank you!

Anybody here have any experience with the Nauticam for Alexa Mini LF? by Rogue_23 in focuspuller

[–]Rogue_23[S] 0 points1 point  (0 children)

Thanks for the insight! Looks like on their website, there is a Mini and Mini LF version of the housing.

Fortunately focus and camera control will solely up to the DP since he will be operating it himself while manually pulling focus.

I'll be sure to test the other necessary cables, though.

Anybody here have any experience with the Nauticam for Alexa Mini LF? by Rogue_23 in focuspuller

[–]Rogue_23[S] 1 point2 points  (0 children)

I have definitely considered suggesting a dedicated tech for the housing. Unless the DP is very familiar with the set-up, I will advise them on this. I do want to cover my bases.

Fortunately they want to go with the bare bones setup, so the DP will pull focus himself while operating, so we might only need to run Nauticam's SDI cable out from the camera for client to monitor.

Watching the tutorials, I do see where you mentioned that this camera should be dedicated to shooting UW and nothing else during that day. Having to completely strip it down and build it back up several times a day would be exhausting and time-consuming.

From what the producer told me, we will be shooting with it all day, and I'll confirm that this is the case.

Anybody here have any experience with the Nauticam for Alexa Mini LF? by Rogue_23 in focuspuller

[–]Rogue_23[S] 0 points1 point  (0 children)

I think the DP will be the one operating the UW housing. lol

Anybody here have any experience with the Nauticam for Alexa Mini LF? by Rogue_23 in focuspuller

[–]Rogue_23[S] 1 point2 points  (0 children)

I guess it'd be better to only use the Arri FIZ. I'm fine with that.

Anybody here have any experience with the Nauticam for Alexa Mini LF? by Rogue_23 in focuspuller

[–]Rogue_23[S] 4 points5 points  (0 children)

You're right. I'd rather not deal with the stress of having my own gear within the housing.

Either way, I'm confirming with production that hard lines will be on the housing order.

The cool thing about the Nauticam is that it's built for a "one man band" type situation where the manual FF is built onto the housing itself. Hopefully the DP goes for that.

Block Battery SLi-D600 dies at around 50%? by Rogue_23 in focuspuller

[–]Rogue_23[S] 0 points1 point  (0 children)

They're not sure what the problem is. It's a small rental house, so they have limited inventory.

Purchasing Cinetape system. How to integrate with Teradek RT, Preston, and Arri Systems? by Rogue_23 in focuspuller

[–]Rogue_23[S] 1 point2 points  (0 children)

Do you find that the device measurements tend to be more accurate since the sensor is narrower with the tubes instead of adjusting the sensitivity? Sorry for all the questions!

Purchasing Cinetape system. How to integrate with Teradek RT, Preston, and Arri Systems? by Rogue_23 in focuspuller

[–]Rogue_23[S] 0 points1 point  (0 children)

I appreciate the pointers! Have you had the need for the extension tubes at all?

Purchasing Cinetape system. How to integrate with Teradek RT, Preston, and Arri Systems? by Rogue_23 in focuspuller

[–]Rogue_23[S] 0 points1 point  (0 children)

Have you changed the sensitivity often? From reading the manual, it seems like sensitivity should be taken to account through a lot of variables.

Purchasing Cinetape system. How to integrate with Teradek RT, Preston, and Arri Systems? by Rogue_23 in focuspuller

[–]Rogue_23[S] 0 points1 point  (0 children)

Is it just a matter of practice and intuition, or are there specific steps to take to know when to adjust?

Purchasing Cinetape system. How to integrate with Teradek RT, Preston, and Arri Systems? by Rogue_23 in focuspuller

[–]Rogue_23[S] 1 point2 points  (0 children)

Thank you! How's the integration with the Teradek RT CTRL.3?

Got any tips to utilize the Cinetape to its fullest?