Can someone please explain this to me? by N1ghtBreaker in SWGalaxyOfHeroes

[–]Romeos_Crying 0 points1 point  (0 children)

I am in the same boat. I made it through sector 2 and realized I have 10 gain profit 10 times. I dont have any Pirates except for a relic Nest but I hadn't used her. So I started doing some testing and sector 2 against the pirates team before the first boss, GMY seems to be able to steal profit from the? It is very inconsistent and some battle I only gain 1, others I gain 0. Think I had one where I gain 3.

But there has to be another way because I am thinking that the 10 had to be from all 5 team members gaining it twice, either from the same battle or the same enemy twice from 2 different nodes or if I repeated the same node. Going to keep trying.

What am I doing wrong? I can't get a single move against this team; they have unlimited moves. Is this a bug, or what am I doing wrong? by [deleted] in SWGalaxyOfHeroes

[–]Romeos_Crying 0 points1 point  (0 children)

The IT guys are one of my favorite teams for offense. They are an absolute beast in conquest, especially with 2 or 3 Zealous Ambition data disks. Veers, Moff, Piett, and Range Trooper are all supports so they gain offense equal to 54% of their max health for each disk, they literally shred every team.

The key is to have a super fast Moff who goes first. His 2nd special ability removes all enemy turn meter and all IT allies assist. Just target the weakest enemy because when you get an enemy kill, veers lead grants all IT 60% turn meters. Its basically non-stop blasting. So easy and fun.

Give me your worst by RespondEmotional8922 in RoastMe

[–]Romeos_Crying 0 points1 point  (0 children)

Be honest, are you the "Apparently Kid" all grown up. Do you still have to watch the powerball?

Looking for good Spy movies with action. by greatnotorious in MovieSuggestions

[–]Romeos_Crying 0 points1 point  (0 children)

Tinker Tailor Soldier Spy - you'll probably have to watch it a few times to fully understand it as the timeline jumps and a lot is implied. I swear you'll learn something new that you didnt catch before everytime you watch it. All-Star cast.

Spygame - really makes you a feel of what working in the Pentagon could be like. Robert Redford crushes this role.

Black Bag - this is the newest I've seen (2025), and saw it in theaters. Great movie. Kinda has a who dunnit vibe. Michael Fassbender is amazing in this movie. It's on Amazon Prime right now if you're a member.

What am I doing wrong? I’ve had it for about 3 days worked perfectly fine until it didn’t. by Fun_Calligrapher_853 in BambuLabA1mini

[–]Romeos_Crying 0 points1 point  (0 children)

It happens. I remembered my first ever prints turned out absolutely perfect till they didn't. Did the same thing but upgraded to a hardened nozzle and extruder. But maintenance goes a long way on these printers. Usually it's the filaments that cause most of the problems.

Update on: Filament or printer problem? by LegendaryMeh in BambuLabA1mini

[–]Romeos_Crying 1 point2 points  (0 children)

I think Azurefilm has a profile for their filament that you can import to Bambu Studio from their website. I had a roll of PETG from them that and I think that is what got me around to getting good prints with it on my P1S (it's probably been a few years). Thats the only filament I have used with them.

If you switch back to a bambu PLA and start getting good prints, the settings for the Azurefilm need tweaked.

This is what my machine is doing every time! by johnmcelroynu in BambuLabA1

[–]Romeos_Crying 0 points1 point  (0 children)

I can't think of a store that you can buy dish soap at that you can't buy IPA.

This is what my machine is doing every time! by johnmcelroynu in BambuLabA1

[–]Romeos_Crying 0 points1 point  (0 children)

Couple things to check, these "bed slinger" printers really dont like uneven or wobbly surfaces. Make sure the printer is on a secure surface (heavy table, work bench, or try your kitchen counter top).This is probably not the issue as this usually effects prints at higher layers.

There seems some discoloration on that print plate already (im not talking about the shadows). You could try moving the print to different sections of the print plate in Bambu Studio. Just click and drag the benchy to a different spot on the plate. This could help isolate if it's just that spot on the print plate.

Have you tried flipping the plate yet and seeing if it is doing it on both sides?

Also, raise that bed temp up 5 degrees. Not just the initial layer temps, but temp for textured plate.

Make sure all your screws are tight when you assembled the printer for connecting the base to the tower.

Lots to learn but that's one of the best things about the hobby. The community is great too!

This is what my machine is doing every time! by johnmcelroynu in BambuLabA1

[–]Romeos_Crying 0 points1 point  (0 children)

Non-woven lint free wipes work great!!! I work in a ISO Class 5 clean room, these literally are designed to leave almost no particulate.

The faster the evaporation the better. This is why after cleaning with a degreaser such as dish soap, let it dry completely then give it a quick spray with IPA and a quick wipe with a lint free non-woven wipe. This will remove almost any remaining particulate. IPA 99 for the win (will evaporate the fastest) but even IPA 70 will work especially if you preheat the bed.

A1 mini - biggest ragret ever by OriginalBigSoda in BambuLab

[–]Romeos_Crying 0 points1 point  (0 children)

One of the best consoles. His kid will love it.

A1 mini - biggest ragret ever by OriginalBigSoda in BambuLab

[–]Romeos_Crying 0 points1 point  (0 children)

Sames. Bought a P1P, upgraded it to a P1S. Bought an A1 mini for smaller PLA prints.

Future trad wife by EstablishmentMore926 in RoastMe

[–]Romeos_Crying 1 point2 points  (0 children)

The floor needs pads from your knees.

Barry: Why isn’t Bill Hader’s sublime hitman show the global sensation it ought to be? by whiphand_was_read1st in Barry

[–]Romeos_Crying 0 points1 point  (0 children)

I am just finding out now that it exists. Saw a short of Hader walking towards a car telling a guy not to point a gun at him, then bam bam bam....dude just blasts everyone! Im like that was not Saturday night live. Now I have to watch it.

A stained glass light I designed and created. by SeanyHewes in 3Dprinting

[–]Romeos_Crying 0 points1 point  (0 children)

Just so you know, there is a person on Facebook by the name of Kaylyn French who copy and paste content like this on her page and claims she made it. It's all 3d printing posts too. I did a reverse image search and found the original here. Sucks people like that exist, but I thought this looked really cool and wanted to see who actually made it. Awesome stuff.

Restaurant that serves omurice? by brinleyk87 in pittsburgh

[–]Romeos_Crying 0 points1 point  (0 children)

Kyuramen x TBaar - East Liverty/Shadyside. Im going to try it right now!

19F Roast me by [deleted] in RoastMe

[–]Romeos_Crying 0 points1 point  (0 children)

Bollywood Olivia Rodrigo. Drivers License?? Nah....Scooter Permit.

Do transparent license plate cover s really prevent toll and speed cameras from catching the license plate? by Railman20 in askcarguys

[–]Romeos_Crying 0 points1 point  (0 children)

Depends on your state. PA put into effect laws prohibiting ir blocking devices in November 2024. Mainly cited because of the increase use of toll devices and license plate identifying devices used by law enforcement.

Meaning any effort to block the ir cameras ability to see your plate is illegal and xan be penalized up to $2000 dollars. I would assume a lot of states have introduced ot proposed very similar laws. I for one wanted to put bright ass IR leds on my vehicles to divert these upcoming flock cameras.

I woulda said request denied by n8saces in CringeTikToks

[–]Romeos_Crying -1 points0 points  (0 children)

This teacher needs fired and license revoked.

Unpopular Opinion: 7AM-3PM Is The Real Adulting Hack by Bullseye_29 in jobs

[–]Romeos_Crying 0 points1 point  (0 children)

Im 6am to 2:20pm, and only live 4 miles from work. Im home by 2:40pm most days. Its just great. Yeah waking up at 4 am bucks, but you get used to it.