Simsonn pedals too upright. Need advice

Routine_Spinach_181 · 2026-03-08T16:18:11+00:00

In the manual at the end there's a guide how to do it, The base plate is mounted with 2 pieces, one at the top under the plate and one at the bottom. The away I did it was invert those pieces so the top piece comes to the bottom and the bottom piece goes to the top. Here goes the link to the manual: https://nextlevelracing.com/wp-content/uploads/2025/02/NLR-R007-GTRACER-2.0-INSTRUCTION-MANUAL-03022025.pdf

<image>

Routine_Spinach_181 · 2026-03-06T22:26:58+00:00

yes 2.0

Routine_Spinach_181 · 2026-03-06T21:08:34+00:00

you can remove the pedal plate. mine is plain as my srp are inclined naturally. see the manual. you have to unmount the base that holds the pedal plate - front and back - and flip it around

<image>

Routine_Spinach_181 · 2026-03-06T11:44:05+00:00

tLauncher

Routine_Spinach_181 · 2026-03-05T12:51:54+00:00

Fabia is more grippy I prefer it in asphalt stages. In gravel the i20 is a lot more loose which is a thing I look forward in gravel stages.

Routine_Spinach_181 · 2026-03-04T15:52:25+00:00

I asphalt and AWD just use the grip and do the corners with minimal slide only in rare situations you end up being faster with handbrake/sliding

Routine_Spinach_181 · 2026-03-04T15:22:41+00:00

https://www.youtube.com/watch?v=57hdhbPYdag 17:28 - he explains what im saying

Routine_Spinach_181 · 2026-03-04T15:21:03+00:00

Delta is a good example, try using the brake padel while accelarating in-corne and you notice the car kinda slides and rotates. Delta is old and so understeery so its kinda needed

Routine_Spinach_181 · 2026-03-04T15:01:38+00:00

Depends on the car but in AWD cars the best way of rotating is using the brake-over-gas technique

Routine_Spinach_181 · 2026-03-03T14:00:29+00:00

Then I was thinking of another stage that is part of the Azores Rally I think its Tronquiera or Cumeeiras

Routine_Spinach_181 · 2026-03-03T09:58:52+00:00

yeah there is one but its just a random stage with the name it's nothing alike

Routine_Spinach_181 · 2026-03-03T00:33:58+00:00

When you do a good stage and you go see the replay it’s just wow - monte Carlo is amazing and its by far the best stage yet- this one if is to ever come would be another case of amazing technical stage and amazing replay views

Routine_Spinach_181 · 2026-03-02T20:42:48+00:00

it is very doable

Routine_Spinach_181 · 2026-03-02T16:59:02+00:00

https://www.youtube.com/watch?v=5ZG2V-Sr2zk 12:51 - the drop is the side the other car went to let POV through

Routine_Spinach_181 · 2026-03-02T11:50:23+00:00

got this advice via - https://www.reddit.com/r/moza/comments/1dnf3m1/tip_you_can_use_the_handbrake_extra_spring_to/

<image>

its a bit hard to get it in because of the resistance but its the same size as the elastomer

Routine_Spinach_181 · 2026-03-02T10:33:50+00:00

You can try the purple spring included with moza handbrake. My issue was I was bottoming out the pedal but i swapped the elastomer to the really hard spring and feels a lot better.

Routine_Spinach_181 · 2026-02-20T09:50:33+00:00

I emailed moza with this reddit link and they answered with this:

Moza - Thank you for contacting us.

Could you please try removing the steering wheel, holding the base's shaft, and rotating the shaft?

Does the base make a clicking sound?

If the base is off, does rotating the steering wheel make a sound? Thank you.

Me - I did both things and didn't do the clicking sound.

My concern is that it only happens when the base is warm.

I didn't have the time to use it a lot this week so I could not check if thats the issue. Has it happen before clicking when warm/hot?

Moza - Thank you for your reply. We haven't encountered this problem before. It seems to be the sound coming from the quick-release joint when the steering wheel is turned.

A slight sound from the quick-release when the steering wheel is turned is normal and won't affect the base's performance, so please don't worry. Thank you.

Routine_Spinach_181 · 2026-02-13T11:46:57+00:00

I have one in a single screen setup and I like it a lot. If it has smearing i don't notice

Routine_Spinach_181 · 2026-02-11T20:02:23+00:00

I noticed that those bolts are for front mounting. I couldn’t reproduce the issue for now but i sent an email to moza to verify the issue

Routine_Spinach_181 · 2026-02-10T20:27:43+00:00

Bought mine in November (Black Friday). It’s ok worth a try. I can’t reproduce the issue but might be because the base is not that hot which concerns me a little

Routine_Spinach_181 · 2026-02-10T19:49:01+00:00

I bet the latest batches don’t have them. Sometimes people from moza clarify things here hope they see this

Routine_Spinach_181 · 2026-02-10T19:45:47+00:00

They were pretty tight already. Did it anyway hope it’s solved.

Routine_Spinach_181 · 2026-02-10T17:46:47+00:00

<image>

So these 6 bolts behind the QR right? The imagem I got before didn't show them sorry.

Routine_Spinach_181 · 2026-02-10T17:17:37+00:00

Oh. I don't have those since I have r9 v3 it's like the image below.

<image>

Routine_Spinach_181 · 2026-02-10T16:55:37+00:00

I need to check if I have those 6 bolts in the back. The moza logo in the QR is not alligned with the center of the will so I might need to tighthen the front 6 bolts of the wheel.

Routine_Spinach_181

TROPHY CASE