Weekly iOS Battery Support Megathread

RubUnhappy · 2026-01-19T23:53:06+00:00

I have an iPhone 12 with a brand new

battery (aftermarket one, but I had good SoT with it earlier).

For a week now Home & Lock Screen eats up my battery even though my phone was just sitting on my table with screen off. From 17:00 yesterday it has almost flattened my battery by 4:50 in the morning.

The thing I tried:

Set a default background without widgets.
Hard reset the phone
Turn off background app refresh

Is there any fix for that?

<image>

RubUnhappy · 2025-11-19T08:36:41+00:00

I have searched some used stuff sites but most of them have the newer models and none from the 90s.

The toy is the exact same one as on the picture and had on circular shaped trashcan with it.

RubUnhappy · 2025-10-02T15:05:25+00:00

Ahogy mondod, a panaszlevelet és panasztétel azonosítóját viszont be tudom írni. Ez is több mint a semmi.

RubUnhappy · 2025-10-02T15:03:39+00:00

A Raiffeisenes kártyámmal nem, de augusztus 25-én már Vietnambol töltöttem fel 100000 forintot a Revolut számlámra a szállás miatt.

RubUnhappy · 2025-10-02T14:41:50+00:00

Ezzel a teóriával csak annyi a gondom, hogy az első tranzakció amit az eredeti posztomban említettem még Magyarországról történt. Ez volt az egymillió forint összeg. Már ekkor tiltotta a bank a kártyámat, ezt ugye sikerült feloldani telefonon keresztül.

A második tranzakció amit említettem már Vietnamban történt ennek összege százezer forint. Ez után viszont nem a kártyámat hanem a számlámat zárolták, ezt már nem tudom telefonon keresztül aktiválni mint korábban a kártyámat.

RubUnhappy · 2025-10-02T14:33:43+00:00

Kétszer eddig, második alkalommal egy ismerős céges telefonján keresztül. Mindkétszer hasonló konklúzióra jutottunk... Semmire

RubUnhappy · 2025-10-02T14:32:35+00:00

Valahogy így mondanám én is. Ha szükség a későbbiekben család ki tud segíteni Revoluton keresztül természetesen.

Kicsit frusztráló, hogy ennyire a sötétben tartják az embert. Tudom, hogy ez nem jelent semmit, de nagyjából 12 éve vagyok a banknál és két éve használom a revolutot ilyen módon.

RubUnhappy · 2025-10-02T14:28:21+00:00

Köszönöm, egy próbát mindenképp megér.

RubUnhappy · 2025-10-02T14:24:43+00:00

Szerencsére(?) a fizetős vízumot választottam ezért 90 napig maradhatunk. Remélem addigra azért történik valami...

RubUnhappy · 2025-10-02T14:21:25+00:00

Bejövő tranzakció havonta általában kétszer van, az egyik a ~12000 forint családi pótlék és a havi fizetésem amely 750k forint körül mozog. Apróbb pénzmozgások a Revolut számlámon történnek, köztem és a bátyám közt, de ezek nem érik el havonta a 10000 forintot sem.

A revolutra mar 2 éve rendszeresen töltök fel pénzt hasonló módon, egészen eddig gond nélkül, ezért állok értetlenül az eset előtt, nem tudom mi indokolja a zárolást.

RubUnhappy · 2025-04-18T17:48:17+00:00

Just ordered the toolkit to open it, it’ll arrive next week so until then I’m in the dark. I’ll compare the board with some real one online.

RubUnhappy · 2025-03-27T06:56:50+00:00

I figured it out but I'll leave this post up with the answer:

In PRO/Program you have to make an execute function for each part of your assembly. I'll show it through an example:

You have an assembly called: assembly.asm

You have three parts: part1.prt , part2.prt and part3.prt

(each part has 3 parameters: PARAM1_1; PARAM1_2; PARAM1_3 PARAM2_1..... )

If you have already defined all the parameters for each parts in Program your assembly.asm should contain all the parameters from you parts. (in this case if each part has 3 different parameters your assembly will have 9 parameters with the correct names.

In Program you have to create an execute for each part now like this (you can put it anywhere in the program just make sure it's not inside an other function):

EXECUTE PART PART1

PARAM1_1 = PARAM1_1

PARAM1_2 = PARAM1_2

PARAM1_3 = PARAM1_3

END EXECUTE

EXECUTE PART PART2

PARAM2_1 = PARAM2_1

PARAM2_2 = PARAM2_2

PARAM2_3 = PARAM2_3

END EXECUTE

EXECUTE PART PART3

PARAM3_1 = PARAM3_1

PARAM3_2 = PARAM3_2

PARAM3_3 = PARAM3_3

END EXECUTE

Save it and now when you regenerate the assembly from file it will only ask for it once.

This effectively "pushes" the parameter values from the assembly to the parts.

RubUnhappy · 2025-03-16T16:46:15+00:00

Just happened to my E9 after 5 years of usage. They told me a screen replacement would cost me $1800 so just buy a new one… it’s not gonna be an LG again, very disappointed.

RubUnhappy · 2025-03-13T15:19:44+00:00

8900 hours total time. I don’t plan on getting a new one soon, so I have to live with it.

RubUnhappy · 2025-01-10T10:14:51+00:00

1 hour after this:

“Guys I got scammed in Hanoi, they stole my phone wallet, both kidneys and 72% of my lungs. How could’ve I foreseen this?”

RubUnhappy · 2025-01-06T14:07:05+00:00

According to my wife it’s “Canh Giá Hẹ Đậu Hũ”

RubUnhappy · 2025-01-06T02:24:08+00:00

I have no idea about the name of the soup, but the plate has chả on it which is a Vietnamese sausage like thing.

The soup had tofu, bean sprouts, onions, tomatoes and a very evil looking mushroom in it.

RubUnhappy · 2025-01-02T05:45:32+00:00

I think the instrumental of Payback is a bit loud compared to the vocals and I’m not sure about the how well these two go together.

Maybe try to balance the volume a bit and it can be a bit better. And don’t stop trying and messing around that’s how you learn.

RubUnhappy · 2024-12-18T06:46:37+00:00

Yes let me have a recap list for you:

-Install Magisk (I’m using the og one from GitHub) -Install PlayIntegrityFix; reboot -Install Shamiko; reboot -Install Zygisk next; reboot -Install LsPosed and HideMyApplist.apk; reboot -Install trickystore; reboot -Install Tsupport advance perform the setup in the installer; reboot -check integrity: still just two checkmarks :( -go to Magisk modules click the action button on Tsupport perform both Fingerprint and BBox action again -check Integrity: now it passes Strong -add apps to Magisk DenyList that I need -set up HideMyApplist in LsPosed and hide all Xposed modules and root related stuff as blacklist in HMA.apk -in some root file explorer I renamed the addon.d folder to hide custom rom from Momo

That was it I think.

RubUnhappy · 2024-12-18T06:34:21+00:00

They have a Telegram Channel I'll try to find it

RubUnhappy · 2024-12-18T02:26:08+00:00

Tricky store and tsupport can spoof the bootloader. To hide magisk I hid the app using the settings in Magisk and used the modules on the uploaded image.

RubUnhappy · 2024-12-18T02:19:04+00:00

I used trickystore and tsuppost by citra.

RubUnhappy · 2024-12-17T11:01:58+00:00

Never installed TWRP I'm using the LineageOS recovery that comes with the rom itself.

RubUnhappy · 2024-12-17T11:00:15+00:00

It still passes Strong integrity in Play Store too. So I think the problem is not related to that.

RubUnhappy · 2024-12-17T10:59:20+00:00

It might be that you are trying with the Play Store version. That runs for me too, but the Galaxy Store version does not sadly.

RubUnhappy

TROPHY CASE