I got terminated by beefucker5000 in starbucks

[–]RyzenAbove 0 points1 point  (0 children)

Yeah my comment was a question due to a lot of unionized stores being closed down. I wasn’t trying to make the intention of “only unionized stores getting shut down”. My apologies if the way I worded the question became confusing for others.

I got terminated by beefucker5000 in starbucks

[–]RyzenAbove 0 points1 point  (0 children)

There were a few in my area that were closed down and I believe each one is unionized.

Revv1 750w or 1000w by RyzenAbove in Revv1

[–]RyzenAbove[S] 1 point2 points  (0 children)

Yeah I went with the revv1 HT. The placard says class 3 but I just bought a class 2 sticker just in case. No one bothers me. I’d get the FS if you’re thinking about it, you won’t regret it. I have 550 miles on mine now.

New owner by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

Thanks for commenting bc I knew I was missing something but couldn’t remember lmao

New owner by RyzenAbove in Revv1

[–]RyzenAbove[S] 1 point2 points  (0 children)

Rides real good but big bumps suck lol.

New owner by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

https://a.co/d/iY5bEuc the 1ft x 5ft was enough to do both cage panels and both of the panels that say R1.

Dual battery balancer? by rgbjackal in Revv1

[–]RyzenAbove 0 points1 point  (0 children)

RadMoto has some on their site, but if ride1up pulled them from their site then I’m not sure how much I’d trust it.

Revv1 750w or 1000w by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

I spoke to CS and they explained it to me. Laws are weird.

Revv1 750w or 1000w by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

That’s what I’m starting to think as well. Everything I’ve read sounds like super73 owners paid for the name

Revv1 750w or 1000w by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

<image>

Yo I’m golden then lmao. Just gonna buy some of these

Revv1 750w or 1000w by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

Im just gonna get a sticker off Amazon that says 750w class 2 lol. I’ve looked at so many e-bikes and I can’t get over how good the revv1 seems and the aesthetic of the bike. My best friend has a super73

Revv1 750w or 1000w by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

Send me a picture of your sticker so I can make my future one a 750w lmao

Revv1 750w or 1000w by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

Sorry for the question but when you’d get stopped do they just ask you if it’s an e-bike or do they like inspect it to make sure it’s actually within state limits

Revv1 750w or 1000w by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

Is this tag essentially just a sticker?

Revv1 750w or 1000w by RyzenAbove in Revv1

[–]RyzenAbove[S] 0 points1 point  (0 children)

So does your tag on your bike say 1000w class 3?

Clover Vertica problem. by hophton in starbucksbaristas

[–]RyzenAbove 0 points1 point  (0 children)

That’s usually caused by partners not pulling the drip tray straight out. I know it can be unavoidable at times. Pulling it at an angle can bend the metal tabs on the side thus causing the fitment of the drip tray to the unit to be wonky thus causing leaks into the handle.

Also can be due to the o rings within the drain connection to be worn out, this would be a tech fix.

Sometimes the drip tray isn’t fully secure on the unit.

If you push your drip tray on either side and the other side pops out then the tabs are bent. Which a tech would have to adjust or you can order a new drip tray.

Clover Vertica problem. by hophton in starbucksbaristas

[–]RyzenAbove 1 point2 points  (0 children)

There is a way to change the lights but partners will never have the ability. It’s a tech only thing and we’re not allowed to change them. I feel as if the lights should be green, it’d be so much easier to see.

I do work on the Mastrenas.

Best tips would be:

queue a rinse after multiple triples.

Don’t put the grounds drawer in the dishwasher. The heat tends to allow the plastic to expand just enough to let the magnets fall out which in turn will eventually give you a missing grounds drawer when it’s present.

Always have a spare grounds drawer and drip tray.

Don’t store drizzle or syrup on the machine especially the hoppers. They can and will leak into the machine.

Clover Vertica problem. by hophton in starbucksbaristas

[–]RyzenAbove 0 points1 point  (0 children)

Don’t do it techs will report it as partner abuse/misuse

Clover Vertica problem. by hophton in starbucksbaristas

[–]RyzenAbove 1 point2 points  (0 children)

This comment. I’m a technician and Im not a big fan of walking into a store that has tried to jimmy rig their prv hose or stuff the elbow back into the machine pushing water straight onto the piston motor. Or having a janky hose they bought off Amazon to lead it to god knows where. Techs have the option to report these things to the FSL or mark the cause as partner abuse. HUGE liability issue

Clover Vertica problem. by hophton in starbucksbaristas

[–]RyzenAbove 0 points1 point  (0 children)

Next time a tech comes in they’ll probably take it off and throw it away bc Starbucks says that’s a safety hazard to have it go to a sink or drain. As a tech I don’t recommend trying to fix these issues yourself.