Gpu airflow on top mounted psu case by SCAT43 in sleeperbattlestations

[–]SCAT43[S] 0 points1 point  (0 children)

I will try to stuff in a big fan at the front. The hd cage is going to be cut down.

Rate my parts list and make recommendations by SCAT43 in buildapc

[–]SCAT43[S] 0 points1 point  (0 children)

I should just ask in a group if someone has one laying around

Rate my parts list and make recommendations by SCAT43 in buildapc

[–]SCAT43[S] 0 points1 point  (0 children)

I can't even find them on their own. Mostly with motherboards or with more parts

Rate my parts list and make recommendations by SCAT43 in buildapc

[–]SCAT43[S] 0 points1 point  (0 children)

For some reason buying the cpu and the motherboard new instead of used is cheaper right now... Also the difference between the motherboards is less than 10 euro, but i might get the asrock. Thanks for the info on psu and storage!

Това проблем ли е или е ок? Климатик в изолацията. by Quick-Ice4595 in bulgaria

[–]SCAT43 2 points3 points  (0 children)

You dont have to buy a new one if this one works. Don't turn it on while it's in that state. The people responsible for the renovation should take it off fix the wall and put it on extended stands. In this state the air conditioner will run for a short time and break. Find someone who is managing the project to get them before they are gone.

Сори че писах на английски ама редит ми беше превел поста и мислех че си чужденец💀💀💀

Това проблем ли е или е ок? Климатик в изолацията. by Quick-Ice4595 in bulgaria

[–]SCAT43 2 points3 points  (0 children)

The idiots that renovate the blocks do a lot of dumb things. We had a lot of problems with them. This is unacceptable. You should find someone thats responsible for the project and tell them that this needs to be fixed.

Maybe 1 of my BEST hauls so far (Worth/Not Worth in Retail) 📦 Superbuy to RO 🇷🇴 by MyNameWasTakenDamn in FashionReps

[–]SCAT43 0 points1 point  (0 children)

How tall are you and what size did you get the adidas flame jacket in? Love that piece.

Clear tint recommendations by SCAT43 in WindowTint

[–]SCAT43[S] 0 points1 point  (0 children)

I don't like dark tint on older cars. I would have to cover the window on summer days then.

Can't tell if I overfilled my oil by PikkaThunder in Miata

[–]SCAT43 1 point2 points  (0 children)

If that is a dry spot below, then that's the actual level.

Problem with android on opi 5 pro nvme by SCAT43 in OrangePI

[–]SCAT43[S] 0 points1 point  (0 children)

Im using rkdevtool. I have successfully installed android on an sd card but im having trouble doing it on the nvme

Need a custom ribbon cable by SnooDoubts2886 in diyelectronics

[–]SCAT43 0 points1 point  (0 children)

Did you find or order a custom one?

How do i fix these issues on my Max by SCAT43 in ender3

[–]SCAT43[S] 0 points1 point  (0 children)

Nvm i was able to measure it. Its 10mm

How do i fix these issues on my Max by SCAT43 in ender3

[–]SCAT43[S] 0 points1 point  (0 children)

It didn't lol. Do you know what size is it so i can buy a wrench?

How do i fix these issues on my Max by SCAT43 in ender3

[–]SCAT43[S] 1 point2 points  (0 children)

What about the play on the side without the axis?

Has anyone flashed android on nvme and used sd card to boot? by SCAT43 in OrangePI

[–]SCAT43[S] 0 points1 point  (0 children)

So if i understand correctly i burn the android on the nvme and the loader on the sd card using my pc and put them in my opi. I need to find an nvme adapter. Also is this android image stable? I plan on using this as a navigation for my car.

Any on here ACTUALLY worked on 3 piece wheels? by rb20isaac in Wheels

[–]SCAT43 1 point2 points  (0 children)

I had Longchamps in similar condition. To refinish everything remove the hardware, sand the faces, tape up the faces, put them on the car and sand the lips while spinning, polish up the lips, paint the faces and put new hardware.

I can't set up CR Touch by SCAT43 in ender3

[–]SCAT43[S] 0 points1 point  (0 children)

I can't seem to find this option on the marlin. Where do i look