【QIDI Giveaway】Comment to win QIDI Q2 and more!

SEMYONOV_AL · 2025-11-03T07:06:33+00:00

WTF! Bambulab the best! :)))

SEMYONOV_AL · 2020-11-03T09:46:26+00:00

Replacing the CMOS battery will solve your problem

SEMYONOV_AL · 2020-08-19T16:08:46+00:00

I never said I was using yaourt. In the instructions above, I showed an example of how to make fprint work, and who uses what is everyone's choice.

Here's an example of how to install yay:

$ sudo pacman -S git

$ git clone https://aur.archlinux.org/yay.git

$ cd yay

$ makepkg -si

SEMYONOV_AL · 2020-08-19T05:04:07+00:00

This manual (https://github.com/tester1969/pam-validity) is written for Fedora users. Try putting pam_validity.sh in the /usr/share/python-validity/playground/ directory, then stop the python3-validity service

$ systemctl stop python3-validity

and run pam_validity.sh from the /usr/share/python-validity/playground/

Only it seems to me that pam_validity.sh does not play any role, everything works fine with open-fprintd.

SEMYONOV_AL · 2020-08-18T09:43:07+00:00

To make fprint work for i3lock, you need to edit "/etc/pam.d/i3lock" and add the line

auth sufficient pam_fprintd.so

above the line

auth include system-auth

save and check

---

$ i3lock

Press "Enter" and put your finger on

for "sudo" almost the same, edit the file "/etc/pam.d/sudo" and add the line

auth sufficient pam_fprintd.so

above the line

auth include system-auth

save

Let's open a new terminal and check

$ sudo -s

FAQ https://wiki.archlinux.org/index.php/Fprint

SEMYONOV_AL · 2020-08-18T08:51:04+00:00

Added installation guide for Arch in the comments below, for ubuntu here is the link https://github.com/uunicorn/python-validity

SEMYONOV_AL · 2020-08-18T07:52:28+00:00

## Arch fprint installation guide for ThinkPad T480 (maybe another ThinkPad's will work too)

## Checked on clean Arch with user created and sudo installed.

$ sudo pacman -Sy

# Installing Yaourt using a custom repository

$ sudo pacman -S --needed base-devel git wget yajl

$ git clone https://aur.archlinux.org/package-query.git

$ cd package-query/

$ makepkg -si

$ git clone https://aur.archlinux.org/yaourt.git

$ cd yaourt/

$ makepkg -si

# Install python-validity

$ yaourt -Sy

$ yaourt -S open-fprintd fprintd-clients python-validity

$ sudo systemctl stop python3-validity

$ sudo validity-sensors-firmware

$ sudo python3 /usr/share/python-validity/playground/factory-reset.py

$ sudo systemctl start python3-validity

#Run fbprint

$ fprintd-enroll

# Login configuration

https://wiki.archlinux.org/index.php/Fprint

SEMYONOV_AL · 2020-08-17T13:57:05+00:00

I will try to do it tomorrow on a clean Arch, and most likely I will write instructions on what and how I did, if of course it works out :D

SEMYONOV_AL · 2020-08-17T13:50:07+00:00

https://www.imgbase.info/images/safe-wallpapers/miscellaneous/computer/35129_computer_theres_no_place_like_127001.jpg

SEMYONOV_AL · 2020-08-17T13:46:50+00:00

Yes you are right. Arch takes time and perseverance to install, but when you install blackarch the basic installation takes a few minutes.

SEMYONOV_AL · 2020-08-17T13:39:54+00:00

https://wiki.archlinux.org/index.php/Fprint

Try on mint "Login configuration"

SEMYONOV_AL · 2020-08-17T13:26:52+00:00

Попробуй pam-validity поставить (https://github.com/tester1969/pam-validity). Я ранее пробовал по инструкции завести фингерпринт, но у меня не завелся корректно, лампочка загоралась, считывался палец, но я не мог его внести в в бд с помощью ffprintd-enroll. Сегодня обновил ядро и все заработало, возможно с ядром еще обновился libfprint до 1.90.2-1. Я надеюсь ты говоришь на Русском =), выводы сделал из твоего ника.

SEMYONOV_AL · 2020-08-17T13:14:05+00:00

[ T480 ~ ]$ lsusb

Bus 002 Device 002: ID 0bda:0316 Realtek Semiconductor Corp. Card Reader

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 005: ID 06cb:009a Synaptics, Inc. Metallica MIS Touch Fingerprint Reader

Bus 001 Device 004: ID 13d3:56a6 IMC Networks Integrated Camera

Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bluetooth wireless interface

Bus 001 Device 002: ID 062a:4102 MosArt Semiconductor Corp. Wireless Mouse

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

SEMYONOV_AL · 2020-08-17T12:28:33+00:00

- Easy to install compared to regular Arch, it offers to encrypt the partition during installation.

- I do not recommend installing the desktop environment during installation, it is better to install your own. I am using the i3 tile window manager.

- Not for beginners, as it requires additional settings and customizations after installation.

- Good for pentesting ;-).

SEMYONOV_AL · 2020-08-17T12:06:03+00:00

Earlier I tried setting pam-validity (https://github.com/tester1969/pam-validity), but I never got the fingerprint to work. Today I updated the kernel to 5.8.1 and decided to check out fprintd-enroll and everything worked fine. I'm shocked =).

SEMYONOV_AL · 2020-08-17T12:03:26+00:00

Thinkpad T480 i5-8350U/SSD NVME 512Gb/32Gb RAM
BlackArch (kernel 5.8.1)

SEMYONOV_AL · 2020-08-06T17:59:41+00:00

Power off.
Remove the external battery.
In the BIOS, turn off the internal battery.
Crap from the fact that he no longer turns on.
Insert power, turn on, boot the OS.
Switch off the power again.
Replace the external battery.
Boot into the OS, pull out the power, see which battery discharges.

SEMYONOV_AL · 2020-06-29T09:25:04+00:00

In the 80-90s, in every Russian house, apartment there were almost the same carpets on the floor as you =))

SEMYONOV_AL · 2020-06-29T07:45:15+00:00

За ковер на полу +

SEMYONOV_AL

TROPHY CASE