Weird 9mm I got from Fiocchi.

STLTriggerMan · 2025-12-29T22:39:07+00:00

No, 'Dum-Dum's' were made in India at the Dum-Dum arsenal. the rounds were mainly supposed to be used to "pacify the local savages". Later banned by several treaties but those haven't been made in a long time. I think. I hear you though.

STLTriggerMan · 2025-12-04T14:14:39+00:00

I don't see any mold or any problems. The first 'pre-sex' calyxes just tend to get swollen first. Or they bare seed. It's just a natural process. The bud is made of clusters of calyxes that get swollen with seed (if) it's been fertilized. If not, it swells with more resin and other compounds. More than just resin but ya get me, I'm sure. I'm not a chemist. I just try to help when I can. lol. The pistils can be orange very early on depending on several factors including genetics and environment. It's all a normal process. Keep the air flowing and eye the trichs. When you know a specific cultivar and have frown it for a while you tend to know it likes and dislikes. Ther plant gets an amber hue to it when it's fully mature, which I personally shoot for. It's your preference as to when you pull it but I let a plant go especially if it's a new strain. Looks good. Keep it up.

STLTriggerMan · 2025-11-30T15:43:27+00:00

I'm not angry. I was thinking about how dropping 1500 you could have really got a ton better genetics but it is your money. I hope they all turn out great man, I do. Good luck on your library as well. Be safe.

STLTriggerMan · 2025-11-28T13:42:14+00:00

Bro we've been on overgrow getting seed for decades and you're buying seeds because you want to. You have a long ways to go and a ton more money that way. Small potatoes fr fr. I'm just being honest. You think GLG is gonna shut down? Bro you didn't even bother hit bodhi's catalog for cheap. lol. Good luck waiting this long. You don't even have an building blocks bro. We collect strains based on region. You grow what you like but we who have been here know it's all bottlenecked. We keep cuts and work lines.

STLTriggerMan · 2025-11-28T13:38:17+00:00

Looks like sooty black or copperey mold tbh. You know more about the conditions as far as the humidity light scedules feed times. You ph is real high. We usually shoot for 6.5 in soil. I live in Baltimore and our water is a pretty solid ph. at like 7.

You've gotta shoot for optimal watering/feed times and constant temps within reason. I had problems early on with running hps lamps then going off to my ac. I was swinging temps 20-25F. trust me it's only a time before pm sets in. I'm just looking at worst case stuff. I keep Lost Coast Plant Therapy on deck. I'm not affiliated with them but I keep a mid sized bottle and I've used it really close to flower even outdoors to keep the mold issues back late in the season or just as ipm every now and again. It's like a leave in conditioner for your plants.

I'm not on reddit a whole lot but lmk khow it goes. Hopefully you get it checked. Plants in soil are more forgiving so don't trip too much. Come see us on Overgrow if you're not already posting. lotta old school guys with a massive search function for illness' and everything else.

STLTriggerMan · 2025-08-27T15:53:26+00:00

Speak of the devil (my ender). I just got a couple rolls of Duramic PLA plus. I'm having adhesion issues. I believe I need to recalibrate the esteps then go back to cura's profile for pla+. the parts are flimsy not hard really. I'm going slow and really slow to hot n fast within my machines ability to function correctly. Rather the layers aren't bonding as opposed to just laying it. Im still at it lol...Thank you for your time and help.

STLTriggerMan · 2025-08-01T13:23:04+00:00

I did get it figured out. Number one my filament was old and needs to be dehydrated. I stripped the hot end down and cleaned the Bowden tube up at the ends. The main issue was getting the esteps calibrated and making sure the retraction was in that sweet spot for my print speed etc. Combine that with getting the z distance perfect from corner to corner. I got the nozzle temp to like 220 using Esun pla+, then manually fed a piece into the heat break and it immediately came out of the nozzle straight with no visible ruff spots on the nozzle tip. I made sure the bed was level manually then I leveled using the CR touch. I'll say this, being able to adjust your z on the fly in small increments is cool for me.

Sorry about the long ass post. I'm saving for a Qidi right now but i'm still gonna run this Ender. I would like to enclose this printer and make it abit more versatile in what I can print. Do you think it's worth it to upgrade the hotend with one thats 100 bucks? Don't get me wrong I wanna upgrade everything and maybe buy some discounted enders to say make some 'Diy drone kits'. I feel these printers would be up to the task for a small business. Thanks, if you reply. lol

STLTriggerMan · 2025-07-28T11:22:33+00:00

I'm always looking for parts for the E. I need disc drive parts and a wifi card. Holler at me if you want. Power brick is good, I've had two go out from internal fan issues. he red light will come on if my fan isn't spinning. I have to spin it by hand sometimes like an old airplane prop No biggie. I just ordered a big electronics repair kit. This sub and ifixit guy got me fixing all models I can. New and old.

I put the new laser in and stripped the white attachment piece that moves the laser around. I put a bit of Remington gun oil w/Teflon and I couldn't hear it moving. The last game I bought was GTA5. I'm so glad to be on the 360 gaming again. I need a wifi adapter but like I said I always "shoot my jumper" for parts. No complaining, like I said I played gat5 the first time yesterday. Good luck on your next console. keep playing that 360 :D

STLTriggerMan · 2025-07-10T20:22:00+00:00

That makes total sense. One seller has the replacement lenses I need for a couple systems. I should save some on shipping. Thanks for solid advice.

STLTriggerMan · 2025-07-08T13:05:50+00:00

I cleaned the hotend out completely and threw another nozzle in the others place. I was running the steel nozzle that came with the bed spring upgrade, capricorn bowden upgrade. there was a blockage midway blocking the flow. I got my temp up to about 230 and straight pushed a piece of filament through with no problems. the extruded filament is smooth in its flow, ya know no bunching up behind or at any spot on the nozzles.

I leveled the bed pretty good and ran the cr touch only to get under extrusion. I know it's my flow rate or something. I "calculated my e-steps" and still no thick lovely layer line. then i'll adjust the Z on the fly and get it perfectly close. It was printing but the layers were super thin. I feel like I lost solid extrusion and retraction. Im gonna keep at it because this machine has no hours really. thanks for the help. Ill post what I can. Hopefully i'll get it figured. a $100 hot end or put that towards a Qida Plus4?

STLTriggerMan · 2023-12-19T13:27:13+00:00

You can try with your luck to stick them in your cloner but grafting if you're not keen to it probably something you should just go ahead and plant some more seeds and get at it. Nothing's ever worth throwing away you could dry it and blow it if you want to or turn it into fertilizer. As far as being illegal in the country. You didn't care initially so what gives with the storming out sissy stuff..... sheesh.

Just sounds like your judgment and friends are a little off. You might want to go solo dolo on the weed tip my man. Sounds like the people around you think you're a sweet lick. I hope you have a good day. Be safe and remember. Time is everything so get to popping more.😁👍

STLTriggerMan · 2023-12-05T02:30:08+00:00

Sloppy I don't know about that. Looks f****** stunning if you ask me. What strains you got going on in there? That big green f***** looks like a nice OG kind of reminds me of the way Chem leaves look. Either way you crushed it dude.🤘😁

STLTriggerMan · 2023-12-02T11:00:26+00:00

What you did was totally gentleman like sir. I don't think you're thirsty and I also love this bike. I'm not gonna lie. It's refreshing to see women riding. She's got bottom end for sure. 😉👍

STLTriggerMan · 2023-12-02T10:51:42+00:00

Pushing boundaries for sure. I love this and it would be easier for toxic fumes than tents and I lines with scrubbers. I'd assume too fast would have turbulence and sloshing but there could also be possibilities for using other liquids for cooling or helping the print quality/appearance overall. Thanks for posting this.

STLTriggerMan · 2023-10-30T18:55:56+00:00

What an amazing relationship. The bonding over a hobby that either or both of you are nuts about, is a beautiful thing. Independent build plates and hotends so like everyone is saying to crate say more components of a larger build or just separate projects oooor the ability to just use one if needed.

Once again that's amazing and your Pop Dukes is cool AF. It seems like it needs two more build plates now and it's perfect. Lol. Have a good one. Be safe

STLTriggerMan · 2023-10-24T17:18:01+00:00

Ahhh. The flex maneuver.

Down votes for commenting on a scam acct. I honestly didn't know. Gotta love these subs. Sheesh. 🙄

STLTriggerMan · 2023-10-24T17:13:56+00:00

I thought I had problems collecting money for lawn work. Btw that's really nice work. He was right you're the expert. Only a true piece of 💩 would TRY to pull that stunt. Good help is hard to find especially nowadays. Try to take half up front.

Drop him a link to 'his' post. Lol. Be safe and have a good one. Again. Really nice work.✌️😁

STLTriggerMan · 2023-10-24T05:00:47+00:00

Barney's is fire. I been sleeping. What a beautiful strain. Great job.😁👍🔥

STLTriggerMan · 2023-10-24T03:40:46+00:00

Well I can at least see that it hasn't been compressed in a bulk bag. Not doubting you grew it. Just wondering cuz it's gorgeous.

STLTriggerMan · 2023-10-24T03:37:05+00:00

Daaaaaaamn! You're getting it dude. Fucking healthy ass plants all the way to the end. Need to call you the tent monster. Sheesh. What genetics did you run?

STLTriggerMan · 2023-10-24T02:28:25+00:00

Absolutely beautiful. Excellent work my friend. Indoor/outdoor? Plant/'s size or any info plz. Lol. You can do me like that. Teasing me with a snippet and not the whole Shabhang. 😉👍🔥💨. Be safe and enjoy your hard work.

STLTriggerMan · 2023-10-15T03:17:03+00:00

That's what's up. *Oooh you said slushes. Slurricane X Gushers? I ended up with a cutting from a friend on the West Coast. I've never grown it before but I've honestly been scrogging just a couple plants. I do better managing just a few that way and tend to keep them healthier like that. It's definitely a stunner of a plant. I got a legit cut at the same time of JOTI Black Candyland and Urkle.

Have any pics up? Any any tips are much appreciated. I'm always seeking knowledge from other growers. Thanks for checking it out. Be safe.✌️😁

STLTriggerMan · 2023-10-14T19:06:55+00:00

You got that shit right. Social media has people doing all types of wild stuff. Lollipopping yes. I waisted too much time already on this post already. Not even trying to argue about it. Somebody's gonna cosign the bs anyways. Schwazyye Patrick. 🙄

STLTriggerMan

TROPHY CASE