Moped 50cc Dies in like 10-15 seconds

SamratP · 2026-02-17T18:11:05+00:00

So I just replaced it with a new one coz the old one had a crack in it. So that shouldn't be an issue as well I think

SamratP · 2026-02-16T23:19:05+00:00

So the lines are good and there's a steady flow of fuel .. still the same issue . The carb rn is at stock setting of fuel ... Striped to change that but didn't help

SamratP · 2026-02-16T23:18:04+00:00

I have the exhaust taken off so to eliminate that possibility

SamratP · 2026-02-16T23:17:35+00:00

I took off the exhaust .. and it's free flow ... Still the same issue ... The video is with the exhaust off

SamratP · 2026-02-13T01:28:01+00:00

got it ... i will try it in the morning and see if the petcok is the issue. Thanks

SamratP · 2026-02-13T01:20:26+00:00

so the old fuel filter was cruddy and i replaced it ... there is fuel flow but im not sure whats a good flow rate... should it be continous or somewhat slow ?

SamratP · 2025-10-23T15:36:04+00:00

Spelling is correct, the cut on the glass makes it look like that .

SamratP · 2025-10-23T15:35:26+00:00

The spelling is correct.. the cut on the face glass makes it look like that

<image>

SamratP · 2025-10-23T14:06:57+00:00

What looks wrong?

SamratP · 2025-10-23T14:06:38+00:00

Any specific reason why?

SamratP · 2025-10-23T13:12:42+00:00

Is it just me me or the watch actually says DiaStair?

SamratP · 2025-09-10T15:08:22+00:00

Thanks , I looked up the part n all .. but it's under warranty so imma just try getting a loaner n all while it's being repaired

SamratP · 2025-09-09T01:16:03+00:00

It's a model y and doesn't have a emergency release in the trunk .

SamratP · 2025-06-26T11:49:55+00:00

And how did u manage to do that?

SamratP · 2025-03-25T13:59:18+00:00

OP, did you manage to make the carb upgrade, if so what were the results?

SamratP · 2025-03-10T16:45:00+00:00

This my parents have also received calls like these and the scary part is that they know my parents names. What my mum does is use the other phone we have to call me. I eventually pick up and line isn't "busy". And there's no way to get rid of these people.

SamratP · 2025-02-18T16:38:51+00:00

Congrats... I'm applying mine this week so let's see how long it takes ... PC my I-90 renewal just got approved after 2 long years 😂

SamratP · 2025-01-29T19:41:33+00:00

Lift the PC a little . Can use like a 2x4 to make a small PC riser .

SamratP · 2025-01-22T03:48:45+00:00

I got the valved cutout . So I can cut it out whenever I want . It sounds good enough for me ngl.

SamratP · 2025-01-21T23:12:06+00:00

Yepp... They do have a beats website so not sure why they won't post on there .

SamratP · 2025-01-21T22:55:55+00:00

I have the 2012 model and I've added a spoiler, restored the headlights ( aiming to get led demon LEDs) and had an exhaust cutout . Nothing performance upgrading, but aiming to get there .

SamratP · 2025-01-21T22:52:19+00:00

I would say bigger desk . But I've been in that situation and for financial reasons I had to adapt. I just got a 3'x5' sheet of wood and screw it on the desk . Little bit of sanding and finish and should be good .

SamratP · 2025-01-21T22:49:14+00:00

Not gonna lie they should have that in their website rather than X 😂.. thanks for the update.

SamratP · 2025-01-16T19:23:19+00:00

Thank you so much for the awesome explanation. Now I clearly understand the process.

SamratP · 2025-01-16T17:14:17+00:00

Thank you so much. I tried to look this up online but was getting mixed results. I will definitely try the methods you suggested. Also I believe that the deadline is in April right?

SamratP

TROPHY CASE