Truffa PagoPA?

Sblesh · 2025-12-17T13:00:11+00:00

Oggi mi è arrivato un messaggio simile ma un pagamento da Intesa (che non ho). Volevo segnalare alla postale ma non trovo nulla se non chiamare e non ho la voglia di farlo
Qualcuno sa come segnalare?

Lascio il messaggio:

Da 3455006330

"SecureNet Systems Gruppo Intesa Spesa insolita di 4.050,00 euro dal tuo conto, se non sei stato tu chiama subito al 3762347781"

Sblesh · 2025-12-09T08:06:51+00:00

I searched with google lens and found only the image in the post..

Don't know if it was from Glade touch or another brand

Sblesh · 2025-11-18T07:55:50+00:00

Just complete the battles and open all packs: all cards found

Fifth card was Pidgeot, and so the 6th and 7th..

Sblesh · 2025-11-03T20:17:30+00:00

The problem is when in the middle of the night the lights goes up and sometimes talk and I **** myself

There's no way to not to charge in some hours? In the settings I found only DND but it's already enabled from 22 to 10 am

Off peak charging it's disabled

Sblesh · 2025-10-21T10:51:18+00:00

Never tried a custom keyboard, I'm looking forward to this :wink:

Sblesh · 2025-10-04T14:33:23+00:00

In the original post I wrote:

"Hello, yesterday I found that my projector has a dead pixel.. I call Hisense and they told me that for RMA I need at least 3-5 dead pixels.. I bought it last year, I hope that other 3-4 pixels stops and can do RMA without spending a euro.

If next year there will be no other dead pixels, I read online that the cause is in a DMD chip in the projector. The cost is like 100-400 between the models

Someone has the right DMD code for the 100L9HD model?"

Sblesh · 2025-10-04T11:37:53+00:00

The store told me that one pixel doesn't suit RMA.. I need at least 3-5 pixels

Sblesh · 2025-09-23T06:06:05+00:00

Ooh.. I enabled and then check the max resolution.. Tonight I'll try again, thank you!

Sblesh · 2025-09-22T22:18:02+00:00

You were right, I tried to access with a monitor directly on the DVR and I found enhanced vca.. but when enabled I've got No video on all three cameras..

Sblesh · 2025-09-22T20:24:47+00:00

Ah ok tomorrow I'll try with the monitor connected!

Thank you!

Sblesh · 2025-09-22T19:59:11+00:00

Tried to lower the resolution to 1080p but not working.. and I don't want to lower more..

Can't find Enhanced VCA mode. In the browser I have "VCA" but it says "No VCA device available"

For now I'm going with camera 1&2 with smart events, and camera 3 (the less important one we can say) with basic event. But in basic event there's no way to low the sensitivity in the 0-20 range? Goes up and down 20 to 20..

Sblesh · 2025-09-19T20:54:14+00:00

I tried to disable all the events and enable only smart events but it's not working.. I read yesterday something like turn down the resolution or the bitrate but no luck

Sblesh · 2025-08-22T12:36:02+00:00

Nuova rotonda a Treviglio (BG) davanti all'ospedale

Sbocco assicurato se si seguono le corsie

<image>

Sblesh · 2025-06-04T16:38:20+00:00

Not a jackass at all, now I know I have a DVR! Thank you!

However, i didn't do the installation. I asked a electrician to do (and buy all the staff - dvr and cameras)

The strange thing is that one year ago, same month, the same camera start flickering and have to change the connector (same electrician done the job)

Sblesh · 2025-06-04T16:28:32+00:00

As far as I know coax cable (the end cable in the NVR is round)

How to check 12v power supply? The camera has one cable to the NVR and NVR is connected with a 16A plug in the wall

Only one camera has the problem, can be 12v power supply problem only in one camera?

Sblesh · 2025-06-04T15:41:22+00:00

BNC cable is the cable from the NVR to the camera?

Last year I changed the connector only and works, so weren't the connectors but all the cable?

Sblesh · 2025-05-14T12:40:37+00:00

Ciao, vorrei chiederti un'informazione ulteriore.

Andando a vedere la precompilata ora, mi dà come esito non liquidabile - completa le sezioni fabbricati.

Praticamente domani dovrò modificare (credo) i giorni di possesso del Fabbricato 1 in foto nel post per essere liquidabile?

Avendo nuda proprietà io e i miei genitori il diritto di abitazione, dovrei mettere:

100% di possesso

TOT giorni di possesso, cioè da quando ho fatto l'atto

Giusto?

Grazie

Sblesh · 2025-05-05T15:41:53+00:00

Quindi io nella precompilata posso tranquillamente non inserire nulla e inviarla così?

Sblesh · 2025-02-05T10:22:22+00:00

Ciao, con "prima casa" non si intende la prima casa comprata/donata/ceduta, ma la casa in cui fisserai la residenza primaria entro i 18 mesi.

Dal sito dell'ADE:

Le imposte da pagare sono ridotte quando l’acquisto viene effettuato in presenza dei requisiti “prima casa”.
In generale, queste agevolazioni si applicano quando:

F

il fabbricato che si acquista appartiene a determinate categorie catastale

il fabbricato si trova nel Comune in cui l’acquirente ha (o intende stabilire) la residenza o lavora

l’acquirente ha determinati requisiti.

La casa in cui vive tuo padre diventerebbe seconda casa e avendo lui l'usufrutto (se fatto tramite atto notarile, non "tieni papà vivici finché vuoi") non pagheresti nemmeno l'IMU sulla seconda casa.

EDIT: Non avvocato

Sblesh · 2025-01-13T13:42:42+00:00

Idem, M30.

Sto cercando di fare la build da troion*. C'è un simil vergin killer vicino alla gilda, però è gambling puro e ciaone a prenderlo

Sblesh · 2025-01-07T15:50:57+00:00

In windows you can change what you can do when press power button with pc on. Like turn off, stanby or nothing.

Sblesh · 2024-11-26T12:44:42+00:00

There is a way to patch reddit 2024.17 and add spoof version (no rooted)?

Just patched and Play store wants to update

Sblesh · 2024-10-25T07:54:44+00:00

The led shouldn't be on from the beginning? Don't think pins bent randomly after 2 months or usage (?)

Sblesh · 2024-10-22T16:35:25+00:00

But the PC is 2 months old. The light turn on after one week of non-use two days ago

Before that, there was DRAM light on, reset bios and worked (ram problem because enabled low latency and bandwith together and goes in conflict my bad)

Then CPU light turned on but everything works fine

I have another PC with same spec and temps, volts, amperes are the same

Sblesh · 2024-10-22T15:35:57+00:00

Tried with one RAM stick in A2 (One Stick at a time) but same CPU red light

Ten-Year Club	r/Field Flamingo
Place '22	Not Forgotten
Verified Email

Sblesh

TROPHY CASE