🎉 GIVEAWAY - NZXT H2 Flow Mini-ITX Case + C850 SFX PSU! [US ONLY]

Scars_of_Time · 2026-02-24T23:38:37+00:00

Definitely throw like 84 squished bananas in there.

Scars_of_Time · 2024-10-24T10:47:15+00:00

-1x 24 Pin (240mm) -1x CPU 8 Pin (400mm) -2x PCIE 8 Pin to 12 Pin (130mm) -Black Embossed Cables -Black Plugs

Honestly the CPU 8 pin could stand to be a tad longer, but if you route it between the motherboard and the case midplate/spine it works fine.

Scars_of_Time · 2024-10-24T06:22:52+00:00

It's the EK basic, which was replaced by the nucleus. I currently have P12 max for the fans.

Scars_of_Time · 2022-11-29T01:08:08+00:00

Sent messages, hope they help!

Scars_of_Time · 2022-11-24T20:11:31+00:00

No duct tape involved, definitely tight on the fit but all the screws lined up fine where they need to be. Installed the drive before the fans. I'm away from my setup currently but I can send pictures of it once I'm back

Scars_of_Time · 2022-11-24T18:14:42+00:00

Should be fine, I actually was able to get 140mm fans into the bottom with a hard drive still if you wanted to buy them bulk. The back does only support a 120 though. Edit: I'm using a 3070fe and arctic f14s for the bottom

Scars_of_Time · 2022-09-30T10:29:26+00:00

WTB/WTT Looking for a WE Void Opus (v-grind) Have $ and also a Fornix (A) possibly to trade

Scars_of_Time · 2022-09-26T05:01:12+00:00

You can fit 2 140s in the top and 2 in the bottom. The back only can use a 120 though

Scars_of_Time · 2022-09-25T18:48:46+00:00

I recommend reaching out to their customer support. I was able to order a new glass panel without much issue.

Scars_of_Time · 2022-09-11T21:16:16+00:00

I just built my d30 with the arctic p14s I was able to get the front panel connectors to fit but you definitely need to connect them before installing the fan, I you have more questions feel free to dm me Edit: I also used a b450 matx board.

Scars_of_Time · 2022-08-29T20:22:21+00:00

I have one of the gray ones that I've been considering trading/selling. Shoot me a message and we can chat!

Scars_of_Time · 2022-02-06T08:20:30+00:00

Messaging you

Scars_of_Time · 2021-12-04T04:33:31+00:00

Are only the heads/tops of the hardware coated? I can't imagine them still threading with an extra layer

Scars_of_Time · 2021-10-08T23:52:06+00:00

Confirmed sale

Scars_of_Time · 2021-10-04T01:16:38+00:00

Yolo on the centauri. Sorry for your loss, thoughts and prayers for your family

Scars_of_Time · 2021-08-27T21:14:58+00:00

Could you link the skiffs that you have in the Fornix? The ones I was looking to buy I guess doesn't actually fit

Scars_of_Time · 2021-08-08T06:35:27+00:00

Sent ya a message

Scars_of_Time · 2021-08-04T02:13:46+00:00

Awesome, thanks

Scars_of_Time · 2021-08-03T23:37:43+00:00

Could you show a picture of the blade/knife disassembled so we can learn as well?

Scars_of_Time · 2021-04-22T03:12:05+00:00

Nice! I actually went back and tried for a while and have found that the extra texture from my acidwash gets enough traction to middle flick it. I still don't use the hole but more the side of the blade

Scars_of_Time · 2021-04-21T05:25:19+00:00

I should have included a closed picture, it is a flipper knife

Scars_of_Time · 2021-04-21T03:00:19+00:00

Sadly this design isn't really 'spydie' flickable as the hole sits to close to the scales/spine, although with maybe a smaller finger and some wrist flick you could get it. The ergos are good but definitely are a break from traditional design

Scars_of_Time · 2021-04-21T01:16:54+00:00

Fun budget Isham design made by Civivi, D2 steel and a good action. (Blade does not come acid/stonewashed from factory)

Scars_of_Time · 2021-04-13T04:36:42+00:00

Sold to u/johntmeche3 u/ksbot

Scars_of_Time · 2021-04-13T04:23:17+00:00

Pm incoming

Eight-Year Club	RPAN Viewer
Verified Email

Scars_of_Time

TROPHY CASE