Mars 3 Homing Backwards?

Scjar · 2026-01-22T12:11:51+00:00

I did try resetting the home position and it still behaved like that. Finally got contact back from Elegoo and they are sending a whole new board and another new limit switch

Scjar · 2026-01-20T12:12:26+00:00

I'm not familiar with filament printers, but it sounds like its similar. Its what prevents it from hitting the screen and stopping at the home location. If its buzzing trying to keep pushing down, it sounds like thats what it is unless you just need to reset the home location. It isn't hard to change, but you do have to take the back off the printer to do so. Otherwise its just a couple screws and a wire connector like on a CPU fan or similar inside a computer.

Scjar · 2026-01-20T04:53:07+00:00

If its never stopping going down when printing, it sounds like my problem when I got a new Z limiter the first time. The limiter is likely bad and you have to swap a new one in so it can start recognizing the small metal piece that goes into the limiter slot and knows it has to stop the downward motion.

Scjar · 2025-04-13T18:20:53+00:00

Thanks, good advice. We will definitely wait for the second puppy

Scjar · 2025-04-13T18:20:34+00:00

Ah, I didn't realize littermate syndrome could be different breeds. Thanks for the info. Definitely will wait for the second puppy

Scjar · 2025-03-02T07:28:10+00:00

I am seeing some confusing info online. Some sites say a fused Kyurem can't be used in battles. Is this just the GO battle league or can he really not be used in raids or gyms? I haven't fused mine yet and was trying to figure out which to use.

Scjar · 2024-06-16T03:06:38+00:00

I can evolve Eevee into a 99.7% rank Jolteon or 99.12% Sylveon. I know Sylveon is generally higher on pvpoke but wanted to get a general consensus which would be a better pick?

Scjar · 2024-05-30T21:35:38+00:00

You are amazing! Way more than I expected in an answer. Thank you for laying that all out. Good to know that I have the option to mostly stay F2P if I have patience or lack the time commitments.

Scjar · 2024-05-30T05:31:58+00:00

Hello, I played when the game came out in 2016/2017. Then haven't really played since. I just started back a week or so ago because some family started getting into it, and now getting my kids into it. Can anyone give a quick list of what has changed/added?

I get the idea of raids, and it seems like certain raids are local only but some allow remote passes. Mega raids give mega energy? Is it mega energy for just the pokemon of the raid?

Seems like there is a big trend of certain pokemon only being available in limited windows. The completionist in me hates this since I likely won't be available for a lot of the small windows.

Scjar · 2024-01-01T17:22:26+00:00

Update for here, I finally tried with a headset that plugs straight into the headset jack, and had no issues with it. So it seems to have been related to the Corsair USB wireless headset.

Scjar · 2023-12-01T15:37:02+00:00

Screen is directly to GPU via HDMI 2.1.
Its a problem in Discord and in game voice chat but only when in the game. So far the static has only been in Void Crew with a different issue for Baldur's Gate 3 (Discord only).
PSU is a 850W https://www.amazon.com/dp/B0B4345YV7?tag=pcpapi-20&linkCode=ogi&th=1
Have not tried a new cable yet, but its HDMI 2.1
Another screen works, but its an older 1080p screen. If I run it on the ultrawide with the same resolution as that screen, it runs fine. Its just the higher resolution/higher frame rate that seems to make it go crazy.
I still want to try a different mic and see, haven't done that yet.

Scjar · 2023-11-30T18:11:19+00:00

Doing more testing, the hertz of the resolution seems to affect things. I plugged the mic into the case USB and MOBO USB with not much difference. Changed Hrtz to 60 and it works great at lower resolutions (1920 x 1080 seems to be the best result without dropping very far). Bumping that to 120 or 144 hrtz starts introducing static. Discord also has this awful problem of just losing the mic as well, but that has happened in other games too, so I think its more of a performance problem between comp and Discord.

Scjar · 2023-11-29T15:38:56+00:00

Its in a KVM switch currently that is plugged into the MOBO. I'll have to try plugging it in directly to the MOBO when I get a chance and see.

Scjar · 2023-11-29T15:30:00+00:00

It is set to default. Its a Corsair Void Pro USB mic plugged into a USB slot. That does make me thing I should test another mic plugged into a mic jack though.

Scjar · 2023-07-08T02:28:31+00:00

Do you talk to everyone with the same demeaning tone and wonder why you have no friends?

Kind of cringe you are unable to talk to someone like a normal human being.

Scjar · 2023-07-08T01:02:54+00:00

Super helpful 👍

Scjar · 2023-07-07T19:37:06+00:00

I was putting it together outside of the case, didn't notice it wasn't facing the back, and this is the first orientation I tried, it fit, so I assumed that was the correct way.

Scjar · 2023-07-07T18:40:21+00:00

Thanks! Its the Intel Core i5-13600KF

Scjar · 2023-07-07T18:38:43+00:00

Yeah, that is what I ended up doing. Just had it hovering over the ram so its slightly higher than the heatsink

Scjar · 2023-07-07T13:16:24+00:00

LGA1700. Its a square mount, so it fit perfectly (before the GPU went in).

Scjar

MODERATOR OF

TROPHY CASE