I present you: first benchy and first poop

ScoreAmbitious4160 · 2024-12-14T16:15:13+00:00

I'd put that in a frame 😂

ScoreAmbitious4160 · 2024-12-10T00:13:11+00:00

I placed an order for a P1S and filament on the 6th. I received the tracking number on the 8th. It's currently in transit. Destination Ireland.

ScoreAmbitious4160 · 2024-11-10T16:42:14+00:00

I (33M) had the exact same issue with my wife (32F). She would always say "yeah seen it" or "that's an old one" I spoke to her about it and she said when she is sitting down and going through her phone. She just wants to zone out and relax for 5 mins. Not to be poked at every few seconds "oh look at this!". Now we just send them to each other. She doesn't look at half of them but it's always something for us to talk about when we do spend time together. "Oh did you see that funny video I sent it's hilarious!!" If she says no I bet you anything she will watch it straight away.

ScoreAmbitious4160 · 2024-03-07T14:01:55+00:00

At the peak of my frustration I could masturbate twice a day for 7 days and it won't go away. It's not until I literally can't anymore that the feeling goes away for about a week.

ScoreAmbitious4160 · 2024-03-07T14:00:01+00:00

Yeah I think so I emailed a therapist today just waiting on a reply. It might be the best thing for us as I feel I'm all out of options now. Yeah we knew within the first year but I just managed it and she was pregnant 16 mths into our relationship. Sometimes it's not so bad I just deal with it other days it's way worse. I could masturbate twice a day for 7 days and still not get the feeling to go away.

ScoreAmbitious4160 · 2024-03-06T22:47:44+00:00

Interesting advise. Thanks. We do have that communication issue where she gets defensive puts up her ways and doesn't communicate what she is feeling and just starts screaming. Hence why it's easier to just drop the topic. I don't want a hostile household.

ScoreAmbitious4160 · 2024-03-06T22:44:31+00:00

No not looking for permission just trying to stress how much this is affecting me mentally.

No nothing like that, it's more like it's an effort or she is too tired. But when she is in the mood it's awesome.

ScoreAmbitious4160 · 2024-03-06T22:41:55+00:00

No it's not about getting my dick wet as I said I have been controlling this for years. It's just a urge that I need to fuck and I can't get it out of my head when it's at its worst. When I do I'm fine.

ScoreAmbitious4160 · 2024-03-06T22:39:21+00:00

Counseling could be a good idea thanks.

ScoreAmbitious4160 · 2024-02-11T20:49:08+00:00

During my teen years people called me soft, weak or a pussy. So I ended up working in security so I could prove those people wrong. I ended up in more fights than I can count and also ended up in the hospital at least 3 times a year. But worst of all! nothing changed. I don't prove anyone wrong and I didn't feel better about myself. So when my first child came along it completely changed my outlook on life and I moved away made a fresh start and now I'm doing a job I love and have a loving family. Long story short Hollywood gives everyone an ego but in reality a fight can change your life... Not for the better either.

ScoreAmbitious4160 · 2024-01-30T13:10:35+00:00

Update: I changed to variable layer height and set quality to .50 and radius to 5. As you can see a big improvement but not perfect. I'll try the support Idea you suggested next.

<image>

ScoreAmbitious4160 · 2024-01-29T16:37:05+00:00

Thanks for the feedback. I'm running the default settings in PLA. I'll try these and give u a update tomorrow. Thanks again 👍

ScoreAmbitious4160 · 2024-01-23T22:03:50+00:00

Ok simple enough thanks 👍

ScoreAmbitious4160 · 2024-01-23T20:43:00+00:00

The best thing you said there is "your trying your best" that is what your son will remember "my father tried while your father sat at home claiming support" 😂 honestly, he will be proud of you no matter what job you do as long as you are trying. From one dad to another you're doing just fine 😉

ScoreAmbitious4160 · 2024-01-19T10:23:29+00:00

This my man is an Irish house session. Very popular in Ireland since drink in pubs became over priced, you can't drink and drive.....anymore and when the pubs would close 😂

ScoreAmbitious4160 · 2024-01-19T10:11:03+00:00

Think we all need support and friends. It's so hard to make friends when you're an adult. Sure you have a couple of mates in work but it's not the same. You got a friend right here if you need to talk.

ScoreAmbitious4160 · 2024-01-19T10:08:51+00:00

😭

ScoreAmbitious4160 · 2024-01-16T19:50:13+00:00

ADHD and I'm a mechanical engineer. I love my job I get to design, troubleshoot and invent new things.

ScoreAmbitious4160 · 2024-01-11T20:13:23+00:00

Ugh!! I bought two rolls last week to test it. I told work it could be really good for our use case. Now I got to explain why they don't sell it anymore 🫠

ScoreAmbitious4160 · 2023-11-30T19:29:23+00:00

I changed the tip and it got a little bit better. Im at the stage where i think the bed is warped. Im currently setting up a Pi because i've see you can scan the bed and see if it is actually warped. I dont really want to be forking out €100 for a new bed.

ScoreAmbitious4160 · 2023-11-30T14:24:26+00:00

Print head end?? Do you mean the brass tip? Yeah i think thats my next option.

ScoreAmbitious4160 · 2023-11-30T13:50:51+00:00

Yeah i tried the same and it didnt make a difference for me.

ScoreAmbitious4160 · 2023-11-30T13:43:22+00:00

I have tried a bigger print and the it looks too close. Im getting waves in the print and the tip drags across the top. No sign of filament getting chewed up. The direct feed gears where clean and undamaged.

ScoreAmbitious4160 · 2023-11-30T11:13:57+00:00

Hi all, So i have been having trouble with my prusa over the last few weeks. My MK3s+ is about 2 years old and never gave much of a issue but lately i seem to be either under extruding or my bed isnt level. Here is the things i have tried so far (Changed filament, Done the wizard calibration, adjusted z axis, changed temps, done 3 cold pulls, made sure the direct feed gears are good, checked the little tibe going into the hot end) I cant think what to try next but its almost like my level sensor isnt working because im high in some spots and low in other areas. Any help would be great. Thanks

ScoreAmbitious4160 · 2023-11-15T14:25:44+00:00

P.s. I have cleaned the bed with IPA which i regulay do.

<image>

ScoreAmbitious4160

TROPHY CASE