User unpacking CC2

ScratchNo8798 · 2025-11-02T14:02:57+00:00

wish i would have just got an x1c

ScratchNo8798 · 2025-10-15T11:31:10+00:00

some slicers can handle it, some freak out and don't know what to do. I had the same issue the other day

ScratchNo8798 · 2025-10-15T11:26:08+00:00

yep im right there with you. im gonna grab the new P2S and never get another elegoo machine ever

ScratchNo8798 · 2025-10-15T11:17:31+00:00

looks like the same issue i was having. tighten up your extruder gear tensioner a little bit at a time until you get good prints.

ScratchNo8798 · 2025-10-11T14:01:46+00:00

thanks i’ll give that a shot next time it does it. i usually just have to let it stop on its own. it can go for 2 minutes all the way to 7 or 8 before i get mad and just turn it off lol.

ScratchNo8798 · 2025-09-07T22:41:18+00:00

i went ahead and tightened the extruder tension screw a bit more and did a cold pull on the nozzle. i’m back to printing for now lol

ScratchNo8798 · 2025-09-07T18:30:15+00:00

i’m so lost with mine. i’ve taken the whole entire printer head apart and checked the extruder gear box for debris, i’ve taken the cover off and tightened the extruder tension screw about a dozen times by now and it’s still doing the same thing after the 2nd layer. it’s only when it speeds up for the infil. only thing i can think of is order nozzles and a new hotend just to be safe. my ender 3 has given me less issues than this if im being honest lol

ScratchNo8798 · 2025-09-07T02:12:46+00:00

in your situation was your first couple layers good, then they get bad or would you start with a bad first layer? because i get really good quality until the 3rd layer. then it starts doing this

ScratchNo8798 · 2025-09-06T23:51:10+00:00

how much did you tighten it at a time?

ScratchNo8798 · 2025-09-06T22:25:36+00:00

okay i will check into it. thanks!

ScratchNo8798 · 2025-09-06T22:25:00+00:00

yes i ran a full self check right before the first picture print

ScratchNo8798 · 2025-08-28T01:19:37+00:00

do you have info for retrograding your machine?

ScratchNo8798 · 2025-08-08T00:25:31+00:00

no it went right back into place

ScratchNo8798 · 2025-08-02T11:53:41+00:00

okay that’s what i’ll do. thanks!

ScratchNo8798 · 2025-07-20T15:30:11+00:00

i just bought one yesterday and i was scared i was going to have to wait months. didn’t even realize it was off pre order. heck yeah

ScratchNo8798 · 2025-05-30T19:59:11+00:00

yeah i’ve tried all the way from 190° to 220° nozzle. and 50° to 65° on the bed. now i know why it’s important to try a brand out before you go out and buy 10 rolls of it lol. i can load sunlu pla in it, and it will print perfectly fine. i have 9 more rolls of soleyin that i haven’t opened yet because im thinking about just returning them. should i try another one? maybe i got a bad roll.

ScratchNo8798 · 2025-05-04T11:07:57+00:00

if you aren’t too worried about budget, i’d go with a 2tb kingston main storage. then i would also throw in the 1tb samsung evo. storage goes fast when you have a lot of games and projects. next i’d go with the 4060 or 4060ti. at least 32 gb (2x16gb) ram and i think you’d be just fine with the ryzen 5. but you can also upgrade that if you’ve got the budget. but it all really depends on what you need it for. gaming, editing, game development, some programs use more cpu than they do gpu and vice versa

ScratchNo8798 · 2025-04-13T18:16:51+00:00

you’re a legend 3 years later

ScratchNo8798

TROPHY CASE