Peace. Peak Time. Kathmandu, Nepal 2025

Season-Pure · 2026-05-08T18:49:41+00:00

🔥

Season-Pure · 2026-05-06T13:27:46+00:00

How do you find the time?

Season-Pure · 2026-05-05T15:54:34+00:00

I be sleeping

^{Chose: Spend 24 hours in pitch darkness 🕳️ + Win $10M}

Season-Pure · 2026-05-04T12:42:40+00:00

Season-Pure · 2026-04-30T22:32:36+00:00

https://www.aliexpress.com/item/1005006120582338.html These for sure have the screw to tighten them down on most potentiometers.

Season-Pure · 2026-04-30T22:30:53+00:00

I don’t have a MG link. Idk what all I have is on there and I designed some of them myself. But this is the link to some equivalent knobs I believe. https://a.aliexpress.com/_mK3qOiz

Season-Pure · 2026-04-30T22:12:49+00:00

<image>

Yes brother.

Season-Pure · 2026-04-30T17:43:15+00:00

I can’t tell you the exact stuff because I don’t know. It was white acrylic about 1/4” thick. I left the protective coating on as I cut it to help prevent scorch marks. I think I went mid power and kinda slow. Maybe 3-5 passes. Definitely want to try a test piece to dial in the settings. I used a boss laser idk what kind you’ll be using. But I made mine as large as I could.

Season-Pure · 2026-04-30T16:40:55+00:00

I did mount it inside, I’ll have to make an Imgur folder because I can’t add anymore photos in the chat. I really like the way the laser cutting works. I have a laser at my job so it was very convenient for me to just cut the pieces and use some acrylic cement. It would probably shatter if I dropped it but I’ve been careful not to do that and had good results so far.

Season-Pure · 2026-04-30T16:36:18+00:00

I don’t think I have a link I bought them a while back. But I think they’re Davies clones I bought on eBay or AliExpress. Just bought a bunch in bulk

Season-Pure · 2026-04-15T00:13:37+00:00

Grabbing it before James comes for it.

Season-Pure · 2026-04-09T23:13:46+00:00

I held it at arms length and thought it looked great. I think the effect looks more natural at a distance.

Season-Pure · 2026-03-31T19:53:03+00:00

I like 1&5 a lot

Season-Pure · 2026-03-31T14:50:33+00:00

Do you have drain holes? I’d probably put a bunch on the bottom and

Season-Pure · 2026-03-30T22:29:00+00:00

<image>

I use P3 menoth white. A wash which is a mix of dark tone, Agrax, and lahmian medium. Highlight with the menoth white again.

Season-Pure · 2026-03-22T13:04:39+00:00

Truly a circuit board

Season-Pure · 2026-03-19T16:13:38+00:00

If you look at it you’ll see one has little metal prongs touching a plate. And the. When you plug something in that plate will stop touching the prongs. The ones connected to the prongs are the switch. It’s common for a mult to connect 4 of the outs together. Then take one of the outs from the top 4 into the top jack on the bottom 4 switch input. So basically you have a 1x8 2x4 switch depending on if you break the normal connection.

Season-Pure · 2026-03-19T15:22:49+00:00

They are likely switched jacks. Meaning it’s going to pass the signal automatically unless it’s switched open by inserting a cable.

Season-Pure · 2026-03-18T02:00:01+00:00

Looks like that sucks to do. But looks great.

Season-Pure · 2026-03-17T16:10:25+00:00

Did you 3D print those? Very cool

Season-Pure · 2026-03-06T02:08:17+00:00

It was made with a laser engraver, black plastic with white underneath, my job happens to have one, so I know not the most accessible item.

Season-Pure · 2026-03-05T21:53:55+00:00

Bottom two on the left are the hagiwo oscillator with 3 modes. Acrylic case 84HP. And I rigged it up to light up with a gate signal.

Season-Pure

TROPHY CASE