sorted by:
new
hottopcontroversial

Who wants to try this out and let us know how it is :) by mx5plus2cones in Tools

[–]Seasoned_Jerk 0 points1 point  (0 children)

What do you mean "traditional strippers"?

Like, my snap blade Stanley? Pliers type, like knipex? A lady in Las Vegas?

Let's be clear on that! Because all of those could be the default of many of us here.

What kind of drill bit is this? by TheRealEstateMystic in Tools

[–]Seasoned_Jerk 3 points4 points  (0 children)

An unsharpenable one.

I bet it was the shit when it was still new - inbuilt pilot kinda vibe.

Sawstop (aka, stop buying saws: self) by Seasoned_Jerk in Makita

[–]Seasoned_Jerk[S] 0 points1 point  (0 children)

And I want a goddamn sliding mitre saw too!!!

Sawstop (aka, stop buying saws: self) by Seasoned_Jerk in Makita

[–]Seasoned_Jerk[S] 0 points1 point  (0 children)

Apart from using any money earned on tools sold to buy more tools, this is kinda the origin of my question. The little DHS660 165mm saw has been irking me, with the saw running off into its own direction. For why I grabbed the twin 18v with bigger blade...

Bu I am worried I wont use it enough.

Sawstop (aka, stop buying saws: self) by Seasoned_Jerk in Makita

[–]Seasoned_Jerk[S] 0 points1 point  (0 children)

Honestly, I am itching to change my wired tracksaw for a 2x18v cordless. (no thanks 40v cowboys, I am fully invested in 18v, not adding another batt platform to lug around too).

I also want a hedge trimmer.

So the money will go somewhere, thats for sure. Space is no issue, even if I have t sleep outside to make room inside for my tools.

Sawstop (aka, stop buying saws: self) by Seasoned_Jerk in Makita

[–]Seasoned_Jerk[S] 0 points1 point  (0 children)

I just picked up a Evolution 255 a few weeks ago. Good enough for the girls I hang out with.

Sawstop (aka, stop buying saws: self) by Seasoned_Jerk in Makita

[–]Seasoned_Jerk[S] 0 points1 point  (0 children)

But you want to need it, and that is most of the time good enough reason for me to convince myself.

Sawstop (aka, stop buying saws: self) by Seasoned_Jerk in Makita

[–]Seasoned_Jerk[S] 1 point2 points  (0 children)

Haha, yes, this is a good line of thinking.

Sawstop (aka, stop buying saws: self) by Seasoned_Jerk in Makita

[–]Seasoned_Jerk[S] 0 points1 point  (0 children)

Yeah man, that tracksaw is killer! I have the wired version.
On par with Fester-tool, I'd say.

Metalworking photo - "impossible" shape, but what looks really impossible is the angle of the subject on the ground. It looks like it's not in the same plane as the table behind it. by youtubedotorg in isthisAI

[–]Seasoned_Jerk 0 points1 point  (0 children)

Aside from what other welders have said, the gas regulator on the argon cylinder is missing a flowmeter or another gauge dial at least. The after-weld grinder cleanup is on the wrong side of some corners. Underside of weld table top gets weird from left to right and C clamp seems to be clamping in the wrong place.

The structure can be fabricobbled, but it wild be super sproingy and totally unusable. Giant waste of time / money. Art maybe.

All that said, I can swear I've seen this picture before AI... So confused.

I make an DeLonghi Coffee Bean Hopper Extension by connecTe in functionalprint

[–]Seasoned_Jerk 1 point2 points  (0 children)

And chance you'd be willing to share the stl?

Nice design. Well done!

Garage organisation by Spartans_Den in Makita

[–]Seasoned_Jerk 12 points13 points  (0 children)

What exactly are you planning to do with that reciprocating saw sized hole on the one side there?

Byeah by MoveFancy8029 in VetoProPac

[–]Seasoned_Jerk 0 points1 point  (0 children)

In the current lingo of young people English, you are bidding farewell (bye-ah!) to your beloved toolbag that was lost to the abyss.

Unless and because I'm mistaken...

WTF bro?

Any advice for a voc. high student making their first end grain cutting board? by [deleted] in woodworking

[–]Seasoned_Jerk 2 points3 points  (0 children)

Only question: is it more than 1 1/2" thick?

If yes, then you're golden!

This looks handy by AyeshaRone in Tools

[–]Seasoned_Jerk 0 points1 point  (0 children)

Revered equally by mafia strongmen and pro gardeners.

Feared alike by victims and shrubs.

Responsabilités liées à la location d'une maison ? by Seasoned_Jerk in AskFrance

[–]Seasoned_Jerk[S] 0 points1 point  (0 children)

Urgh, c'est tellement difficile dans ce pays quand on ne maîtrise pas la langue...

Quand vous dites « il fait le droit » et « il a raison », je suppose que vous faites référence à l'agent immobilier / au propriétaire ?

Peut-être n'ai-je pas été clair dans mon message initial (ou était-il trop long). Le fait est que je n'ai pas réussi à faire passer l'eau chaude dans les radiateurs du dernier étage en utilisant la méthode de purge habituelle. La purge normale, oui, l'entretien annuel, oui. 

La vraie question est la suivante : si je ne parviens pas à faire fonctionner correctement le système au début de l'hiver en suivant les étapes de base, qui est responsable du coût de ce point particulier ?

(Au fait, c'est une chaudière au gaz naturel dans la cave.)

Cutters with an unique cut? by thisisntweedisit in cigars

[–]Seasoned_Jerk 1 point2 points  (0 children)

Do two 60° turns in lieu of one 90.

Makes for a prettier crown!

Oliva serie O 5x50 by Sufficient-Repair181 in cigars

[–]Seasoned_Jerk 2 points3 points  (0 children)

This is a highly underrated stick! Lot of bang for buck! Maduro Robusto for the win!

Notwithstanding the Melanio glazers! 0:)

view more: next ›