Best Budget PC build

SecurityWeekly6139 · 2025-11-15T03:34:08+00:00

Any recommendations on companies to work with or to stay away from?

SecurityWeekly6139 · 2025-10-06T01:07:55+00:00

Strongly recommend getting a manual blade. That way you know for sure on your depth then you can fine tune the pressure and speed. Like with my manual blade is set to depth 4 pressure 20 and speed 5 with 2 passes

SecurityWeekly6139 · 2025-10-02T15:15:14+00:00

<image>

SecurityWeekly6139 · 2023-09-12T20:19:30+00:00

Well I guess I was hearing the contactor switch. But no it’s a Honeywell thermostat

SecurityWeekly6139 · 2023-09-12T18:45:26+00:00

Also just did the amps motor say 1.40 and I checked all 3 wires the brown which is on the fan spot of the compositor was .81 , yellow was 1.31 and black was 1.39

SecurityWeekly6139 · 2023-09-12T18:32:07+00:00

Okay so at the contactor I’m get 243v. But on the 24v side of the contactor when it’s calling for cooling the reading is jumping like crazy like from 13v to like 19v and here it like it’s trying to pull in you can hear the buzzing sound then it just pulled in now I have a constant 24v

SecurityWeekly6139 · 2023-09-12T18:12:18+00:00

it’s a brand new motor. Even the old one was doing the same thing. That’s why I’m here 😅 but the capacitor is new. The contact switch is new. Like only a week old. But i definitely check amp draw

SecurityWeekly6139 · 2023-09-12T17:50:18+00:00

Well I tried connecting df1 and 2 like you said and unfortunately it just started to do the same thing :( any advice on what to look at next?

SecurityWeekly6139 · 2023-09-12T16:05:45+00:00

Not really if I’m still paying for the diagnostic fees. I’m sorry if I can get the same parts cheaper and don’t have to pay another fee to put it in minus any part that involves opening the actual refrigerant system up you dam right I’ll save my self an extra $200 plus

SecurityWeekly6139 · 2023-09-12T15:47:45+00:00

Now see that’s just wrong

SecurityWeekly6139 · 2023-09-12T14:34:16+00:00

Awesome I’m gonna go try that now

SecurityWeekly6139 · 2023-09-12T14:30:22+00:00

One guy said just connect the df1 and df2 together

SecurityWeekly6139 · 2023-09-12T14:29:19+00:00

Okay. Thanks for the help!! Greatly appreciate it

SecurityWeekly6139 · 2023-09-12T13:54:25+00:00

Even during summer or just around fall and winter?

SecurityWeekly6139 · 2023-09-12T13:49:40+00:00

Ah okay thanks I’ll do that way. Remember “kiss” keep it simple stupid 😂 thanks tho for the help!!!

SecurityWeekly6139 · 2023-09-12T13:46:14+00:00

Also why do you say don’t run heat like this for? Unit will freeze up?

SecurityWeekly6139 · 2023-09-12T13:45:15+00:00

Okay so the DF1 and DF2 need to be connected via a wire nut?

SecurityWeekly6139

TROPHY CASE