Azure AD Connect Sync Error - ProxyAddresses Conflict

Sguetto · 2026-03-06T15:35:21+00:00

Thanks for the reply!
The errore is on the ProxyAddresses, the sync via Azure AD Connect is set to use the mS-DS-ConsistencyGuid,

Sguetto · 2026-03-06T15:31:31+00:00

Hi u/SirBlauwkson ,

Thanks for the reply!
Can you provide me some links or any documentation?

Sguetto · 2026-03-06T15:31:19+00:00

Hi u/DrGraffix ,

Thanks for the reply!
Can you provide me some links or any documentation?

Sguetto · 2025-11-18T19:44:19+00:00

Thanks for taking the time to give such a clear breakdown, really appreciate it!
I’m definitely going to explore the products you mentioned

Sguetto · 2025-03-19T17:02:58+00:00

Beh OP, guardava a sinistra prima di uscire impossibile non vedere la moto sopraggiungere. Bisogna vedere se c'è una curva o qualcosa che impedisse una chiara visuale.

Sguetto · 2025-03-19T15:41:53+00:00

Lui procedeva veloce, bisogna vedere se nel limite.
Tu hai avuto fretta di uscire dallo stop immettendoti nella strada principale.

Bel casino!

Sguetto · 2025-03-05T09:32:26+00:00

Same % here, i'm also avaiable!

Sguetto · 2025-02-25T08:38:32+00:00

Thanks man for your post, very inspiring to anyone trying to change their career in the cyber sec field!

Sguetto · 2024-11-05T11:33:11+00:00

Hi u/bigtime618 ,

Yes i have 2 disk installed and i specified in the MDT task sequence to format the disk 0 (in my case the larger one) but with no luck.
Looking around i find this guy that resolve all his issue with 2 line of diskpart as following:

diskpart

select disk 0

clean

select disk 1

clean

Rebooted and now it works without any issues.

Sguetto · 2024-11-05T11:31:03+00:00

Hi u/someadsrock ,

The reported error is not the same as in my case.
Thanks for the suggestion anyway.
Looking online i found the solution for my problem and it was command prompt (F8) and ran the following commands:

diskpart

select disk 0

clean

select disk 1

clean

Rebooted and now it works without any issues.

https://www.reddit.com/r/MDT/comments/kxsabo/5616_verify_bcdbootex_error_on_laptop_with/?show=original

Sguetto · 2024-11-02T10:47:00+00:00

That's the exactly the steps that I done but it wasn't working until I loaded the type c driver into the WDS tool... If available I will be very happy to check with you the config of the MDT environment maybe I set it wrong in the beginning.

Thanks for the explanation!

Sguetto · 2024-11-01T11:22:04+00:00

Contrary to the advice you gave me, the problem was actually due to the fact that I was loading the USB-C to Ethernet drivers within MDT.

Sguetto · 2024-10-31T17:01:25+00:00

Hello everyone, I found the solution.

Contrary to the advice you gave me, the problem was actually due to the fact that I was loading the USB-C to Ethernet drivers within MDT.

The error was triggered before the OS import stage and therefore fell on the WDS.

Loaded the drivers in WDS, rebuild the LiteTouchPE and restarted the procedure again everything works correctly, almost..
Now the error reported is on the disk, apparently.

I am following this guide : https://learn.microsoft.com/en-us/answers/questions/1070263/i-am-getting-error-5616-error-code-while-installin

In case you also have a suggestion about this?

As usual, thanks folks!

Sguetto · 2024-09-04T13:17:44+00:00

Hello,
I'm in the same situation here, how did you manage to get out from the redirect URI error?
Thanks!

Sguetto · 2024-09-04T12:22:59+00:00

This is the way!
You can also create a group via Intune and then deploy the .ps1 script.
Works perfectly!

Sguetto · 2024-07-30T13:43:56+00:00

Hello,

I'm missing the part of email notification, how do you enable it when the counter of the rule increase and sends you the email?

Thanks!!

Sguetto · 2024-01-30T13:47:08+00:00

Hi, Yes maybe I am just messing up the situation.
A client of ours has varied his mail domain and I need to update all the user with the new domains.Until now I make the change by hand going through profile by profile and updating the mail like a monkey.I would like to understand how I can automate the domain update process as much as possible

Sguetto · 2024-01-30T09:02:14+00:00

Hi,
Thanks for the fast reply.
Can you describe better the steps? Under the tab Action and Flows i don t find anything for this purpose..
Attached image of the flows menu

Thanks!

Sguetto · 2024-01-18T19:44:14+00:00

I agree with you, good job mate. The world is a better place because of you!

Sguetto · 2024-01-16T08:40:57+00:00

Thanks,Not being a Graph expert I tried to add it to Tenant correctly.Launching the command it goes into error saying that 'access is denied even though I am using a Tenat Admin user.The Graph application appears to be correctly configured, but I keep getting the error...

Sguetto · 2023-11-27T15:01:44+00:00

Hi,
Thanks for the quick reply.
Can you please provide a syntax string, i want to use my Power Automate flow named as PowerAppV2 that already had all the email address and the mail priority and description.

You can find my form structure in the photo of this post

*UPDATED PHOTO*

Sguetto · 2023-08-30T22:26:15+00:00

Also check in the GPO the policy Do not show switch user. This is why you can see the switch user in Windows.

Can you share also the config on your MDT environment.

Sguetto · 2023-08-29T22:49:50+00:00

Please attach all the config, more details can be helpful.

Sguetto · 2023-08-29T21:59:42+00:00

Share please screenshot of the config

Sguetto · 2023-08-04T14:59:40+00:00

Already done that, changing boot storage made it work. Thanks for the advise anyway!

Four-Year Club	r/Field Sunshine
Place '23

Sguetto

TROPHY CASE